Abstract:Material Point Method(MPM) belongs to one of the meshless numerical analysis methods.It is able to integrate a variety of constitutive models and consider the fluid-solid coupling behavior within soils,so as to effectively simulate the large and extra-large deformation of landslides.This paper introduces the fundamental principles of MPM,the governing equations and the solving formats.Based on the 5 types of porous media characterization models of MPM,we briefly review the state-of-the-art of run-out process simulation of soil landslides using MPM.Subsequently,we simulate the run-out process of Shenzhen "12·20" landfill landslide using MPM with the single-layer and sing-phase material point model.Linear loading is applied to identify the initial stress field.Elasto-palstic constitutive models using Drucker-Prager yield criterion,GIMP algorithm and MUSL solving format are also used,respectively.The simulation results show that the maximal sliding distance reaches 510m,after the slope losing its stability.Moreover,the longitudinal distance of the landslide scope is 1050m and the minimal landslide angle is 5.95°,both agreeing well with the observed results.The evolution trends of the equivalent plastic strain zone within the soil exhibit that the landslide mechanism is progressive failure.Specifically,shear failure of the soil occurs at the slope toe initially,and tensile fracture occurs at the slope top subsequently,with both plastic zones extending toward the interior of the slope along the bedrock.The extra-large deformation occurs once the sliding surface is cut-through to accelerate the sliding.The MPM simulation for the run-out process of landslides can shed light on the hazardous behaviors of landslides and provide assistants for landslide prevention.

Numerical Investigation of the Failure Mechanisms of Soil–rock Mixture Slopes by Material Point Method

Large deformation failure analysis of the soil slope based on the material point method

Modeling Rock Failure Using the Numerical Manifold Method Followed by the Discontinuous Deformation Analysis

Failure analysis of soil-rock mixture slopes using coupled MPM-DEM method

Material point method for large-deformation modeling of coseismic landslide and liquefaction-induced dam failure

Physically Based Modeling and Animation of Landslides with MPM

Analysis of the Entire Failure Process of the Rotational Slide Using the Material Point Method

Modeling Strip Footings on Slopes Using the Material Point Method

MATERIAL POINT METHOD FOR RUN-OUT PROCESS SIMULATION OF SOIL LANDSLIDES AND APPLICATION

Study on large deformation of soil–rock mixed slope based on GPU accelerated material point method

Runout Analysis of Landslides Using Material Point Method

Analysis of a landslide in sensitive clays using the material point method

Investigation of the slope stability problem using the Material Point Method

Study of the Failure Mechanism and Progressive Failure Process of Intact Rock Patches of Rock Slope with Weak Surfaces

Modeling of soil–rock mixture landslides with the generalized interpolation material point method

A new combined finite-discrete element method for stability analysis of soil-rock mixture slopes

Development of a probabilistic block theory analysis procedure and its application to a rock slope at a hydropower station in China

GPU material point method (MPM) and its application on slope stability analysis

Discrete Element Modelling of a Soil-Rock Mixture Used in an Embankment Dam

Strength reduction material point method for slope stability

Material Point Method-Based Simulation of Run-Out Characteristics for a Soil–Rock Mixed Landslide Induced by Surcharge