Abstract:Material Point Method(MPM) belongs to one of the meshless numerical analysis methods.It is able to integrate a variety of constitutive models and consider the fluid-solid coupling behavior within soils,so as to effectively simulate the large and extra-large deformation of landslides.This paper introduces the fundamental principles of MPM,the governing equations and the solving formats.Based on the 5 types of porous media characterization models of MPM,we briefly review the state-of-the-art of run-out process simulation of soil landslides using MPM.Subsequently,we simulate the run-out process of Shenzhen "12·20" landfill landslide using MPM with the single-layer and sing-phase material point model.Linear loading is applied to identify the initial stress field.Elasto-palstic constitutive models using Drucker-Prager yield criterion,GIMP algorithm and MUSL solving format are also used,respectively.The simulation results show that the maximal sliding distance reaches 510m,after the slope losing its stability.Moreover,the longitudinal distance of the landslide scope is 1050m and the minimal landslide angle is 5.95°,both agreeing well with the observed results.The evolution trends of the equivalent plastic strain zone within the soil exhibit that the landslide mechanism is progressive failure.Specifically,shear failure of the soil occurs at the slope toe initially,and tensile fracture occurs at the slope top subsequently,with both plastic zones extending toward the interior of the slope along the bedrock.The extra-large deformation occurs once the sliding surface is cut-through to accelerate the sliding.The MPM simulation for the run-out process of landslides can shed light on the hazardous behaviors of landslides and provide assistants for landslide prevention.

Investigation of the slope stability problem using the Material Point Method

Comparison of Material Point Method and Finite Element Method for Post-Failure Large Deformation Geotechnical Analysis

Benchmarking the Material Point Method for Interaction Problems Between the Free Surface Flow and Elastic Structure

A Meshfree Method and Its Applications to Elasto-Plastic Problems

GPU material point method (MPM) and its application on slope stability analysis

Large deformation failure analysis of the soil slope based on the material point method

Material point method for large-deformation modeling of coseismic landslide and liquefaction-induced dam failure

Sequential hybrid finite element and material point method to simulate slope failures

A LIMIT EQUILIBRIUM METHOD BASED ON MORGENSTERN-PRICE METHOD FOR 3D SLOPE STABILITY ANALYSIS

Analysis of a landslide in sensitive clays using the material point method

MATERIAL POINT METHOD FOR RUN-OUT PROCESS SIMULATION OF SOIL LANDSLIDES AND APPLICATION

Physically Based Modeling and Animation of Landslides with MPM

Hybrid Finite Element and Material Point Method to Simulate Granular Column Collapse from Failure Initiation to Runout

Runout Analysis of Landslides Using Material Point Method

Analysis and mitigation of spatial integration errors for the material point method

An Explicit Material Point and Finite Volume Sequentially Coupled Method for Simulating Large Deformation Problems in Saturated Soil

A temporal stable smoothed particle finite element method for large deformation problems in geomechanics

A Stabilised Semi-Implicit Double-Point Material Point Method for Soil-Water Coupled Problems

Strength reduction material point method for slope stability

Material point method‐based simulation of dynamic process of soil landslides considering pore fluid pressure

Recent developments of the Material Point Method for the simulation of landslides