Abstract:Although end-bearing energy pile foundations subjected to symmetrical thermal cycles have been extensively studied in the laboratory and in the field, the mechanisms underlying the thermo-hydro-mechanical (THM) interactions in floating energy pile groups and rafts, especially when subjected to asymmetrical thermal loads, are not well understood. In this study, an advanced thermo-mechanical bounding surface model was implemented in finite-element (FE) code to investigate the THM interactions of a two-by-two floating energy pile group and pile raft, focusing on asymmetrical thermal cycles. Computed results are compared with published centrifuge model test results in soft clay. It is revealed that the irreversible volumetric contraction of the soil adjacent to the energy piles accumulates with each thermal cycle, resulting in a decrease in the horizontal stress and hence shaft resistance of the floating piles. During thermal cycles, the stress states of the soil around the energy pile shaft and the soil beneath the pile toe approach the critical state line along different paths. The induced temperature in the soil adjacent to the non-energy pile (NEP) is 5°C lower than that in the soil at the energy pile EP1, which is flanked by the other two energy piles EP2 and EP3. Consequently, the induced excess pore pressure in the soil at the NEP is approximately 20% smaller than that in the soil at EP1. The irreversible volumetric soil contraction at the NEP is about half that at EP1, resulting in approximately 45% less toe settlement. The thermally induced ratcheting settlements of the head and toe of the NEP are less than those of the energy piles, resulting in unacceptable ratcheting tilting of the floating energy pile group. However, the excessive tilting can be reduced by the use of a pile raft.

A Simplified Method for Evaluating Temperature Effect on the Behavior of Layered Soil with a Time-Varying Cylindrical Heat Source

Transient Thermal Response of a Multilayered Geomaterial Subjected to a Heat Source

Thermo-mechanical coupling response of layered half-space with a buried point heat source

Thermo-Mechanical Coupling Response of A Layered Isotropic Medium Around A Cylindrical Heat Source

An Analytical Model for 3D Consolidation and Creep Process of Layered Fractional Viscoelastic Soils Considering Temperature Effect

Thermo-mechanical Performance of Layered Transversely Isotropic Media Around a Cylindrical/tubular Heat Source

BEM-ALEM Modeling of Plate–Soil Interaction for Rigid Circular Foundation in Layered Saturated Soils Subjected to Mechanical or Thermal Load

Thermal responses of layered pavement system with unsteady heat conduction

Numerical Simulation and Analysis on the Heat Transfer of the Vertical Ground Heat Exchanger in Hydrous Soil

Cylindrical surface model of ground source heat pump considering soil stratification

Exact Solutions for Investigating Thermal Response of Saturated Soil Induced by Temperature Change

Coupled Consolidation and Heat Flow Analysis of Layered Soils Surrounding Cylindrical Heat Sources Using a Precise Integration Technique

Effects of Thermal Cycles on Soil Behaviour: Theoretical and Experimental Studies

Development of an Innovative THM Fully Coupled Three-Dimensional Finite Element Program and Its Applications

Water and Heat Transport in Hilly Red Soil of Southern China: II. Modeling and Simulation.

FEM Analysis and Simplified Approach for a Single Energy Pile Subjected to Thermomechanical Loads

Analytical Model for Heat Transfer Around Energy Piles in Layered Soil With Interfacial Thermal Resistance by Integral Transform Method

An Elasto-Plastic Numerical Analysis of THM Responses of Floating Energy Pile Foundations Subjected to Asymmetrical Thermal Cycles

A Simple Computational Framework for THM Processes in Saturated Geomaterials

Finite Element Analyses of Rate-Dependent Thermo-Hydro-mechanical Behaviors of Clayey Soils Based on Thermodynamics

Numerical simulation of frost heave of saturated soil considering thermo‐hydro‐mechanical coupling