Abstract:Large airborne optical systems require very high beam pointing control accuracy , which will put forward some new challenges for the design of an airborne isolation platform .We analyze the characteristics of aircraft struc-tural vibration , and propose to develop a pneumatic and electromagnetic hybrid driving isolator .The isolator uses an adjustable pneumatic air spring with an external air container to suspend the payload , and a coaxial electromagnetic actuator is integrated with the output rod of the isolator , which provides a broadband active control force for the pay-load.The preliminarily determined carrying capacity is 150~190 kg and the isolation frequency range is from 1 Hz to 100 Hz.This paper firstly describes the principles of pneumatic /electromagnetic hybrid driving and presents a structural layout of the isolator .Then it simplifies the system , establishes the physical model , and derives the dy-namic equations of the isolator .Finally, the Matlab/Simulink numerical simulations of the isolator are conducted to research respectively the feasibility and efficiency of PID control algorithm and LQR control algorithms .The simula-tion results and their analysis show preliminarily that:(1) the two active control algorithms are efficient , and the payload′s vibration displacement amplitude can be reduced to ±10μm level under a wide frequency band ( 1~100 Hz) random vertical disturbance;(2) this vibration reduced performance of the isolator can meet the installation requirements of large airborne optical equipment .The comparison between the PID and LQR control methods shows that the vibration reduced performance of the PID method is slightly better than that of the LQR method for a single isolator system;besides, the PID method is easy to implement .

Vibration Isolation Control Performance for an Innovative 3-DOF Parallel Stabilization Platform

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Adaptive Vibration Reduction Control Strategy for 3-DOF Parallel Energy-Efficient Stabilization Robotic Systems

Design and Simulation of an Active Vibration Isolator Based on Pneumatic-Electromagnetic Hybrid Driving

Active vibration isolation based on model reference adaptive control

Analysis and Optimization of a Vibration Isolation Platform Based on 6-DOF Parallel Mechanism

Research on Motion Driving and Tracking Control of 3-DOF Parallel Stabilized Platform

Dynamics and Control of a Bio-Inspired Stewart Platform

Dynamic Analysis and Decoupling Control of Octo-Pneumatic Actuator Vibration Isolation Platform

Hybrid Vibration Control for Structure and Device Platform under Environment Excitation

Semi-Active Control for A Multi-Dimensional Vibration Isolator with Parallel Mechanism

Active Vibration Isolation Platform with Eight Pneumatic Actuators

Six-degree-of-freedom active vibration isolation system with decoupled collocated control

Dynamic Modeling and Control of Flexible Hexapod Platform for Micro-Vibration Isolation and Precision Tracking

Design of a novel two-degree-of-freedom translational-rotation low-frequency vibration isolation platform

Sensor-Fusion-Based Simultaneous Positioning and Vibration Suppression Method for a Three-Degrees-of-Freedom Isolator

Dynamic modeling and control for a three-dimensional vibration isolation system with a 3-RPC parallel mechanism

Micropositioning and microvibration isolation of a novel hybrid active–passive platform with two-axis actuator for optical payloads

Desired Compensation Adaptive Robust Control of an Active Vibration Isolation System.

Dynamic modeling and parameters optimization of parallel – suspension type inertially stabilized platform

Multi-degree-of-freedom Ultra-Low Frequency Vibration Isolation System for Precision Devices with Decoupled Control