Abstract:Vibration isolation systems with quasi-zero stiffness (QZS) performance have been widely studied because of their characteristics: high static stiffness and low dynamic stiffness. However, the effective displacement range of QZS is usually so small that strongly limits its application existing in real engineering. Thus, this study' main innovation is to attempt to expand the effective displacement range of the QZS system via a semi-active control strategy. We first present a novel quasi-zero stiffness (QZS) vibration isolation system. The QZS characteristic is achieved by combining a mechanism with six oblique springs and a coil spring, which provide negative stiffness and positive stiffness, respectively. The effects of inclination angles of oblique springs on the negative stiffness of the system are first discussed via the static analysis method. The dynamic characteristics under simple harmonic excitation are then analyzed using the harmonic balance method, including the jumping phenomena and force–displacement transmissibility. To further enlarge the effective displacement range of QZS, a feedback displacement strategy is utilized to actively adjust the inclination angles of oblique springs and realize the alteration of the stiffness of the QZS system. Results obtained from theoretical analysis show that, in the aspect of low-frequency vibration isolation performance, different from linear systems, the proposed QZS system has obvious advantages, and the displacement range of quasi-zero stiffness property is significantly expanded from a single equilibrium point to a relatively lager range when the semi-active control strategy is implemented. Furthermore, the virtual prototype simulation results reveal that the proposed QZS system can maintain excellent vibration isolation performance under significant amplitude vibration after adding control.

Six-degree-of-freedom active vibration isolation system with decoupled collocated control

Performance Analysis of High-Static-low-dynamic Stiffness Vibration Isolator with Time-Delayed Displacement Feedback

Electromechanical co-simulation analysis for contactless positioning and vibration isolation platform

Modeling and Analysis of a High-Static-low-dynamic Stiffness Vibration Isolator with Experimental Investigation

H<sub>∞</sub>/μ Robust Control of Vibration for an Ultra-Precision Grinding Machine

BASIC THEORY AND TECHNOLOGY IN THE ACTIVE VIBRATION ISOLATION OF PRECISION DEVICES

Comparison of the Dynamic Performance of Nonlinear One and Two Degree-Of-Freedom Vibration Isolators with Quasi-Zero Stiffness

Active Vibration Isolation of a Micro-Manufacturing Platform Based on a Neural Network

H∞/μ Robust Control of Vibration for an Ultra-precision Grinding Machine

Dynamic Analysis and Decoupling Control of Octo-Pneumatic Actuator Vibration Isolation Platform

Modeling and Control of a Six Degrees of Freedom Maglev Vibration Isolation System

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Active/passive vibration isolation with multi-axis transmission control: Analysis and experiment

Decoupling Analysis and Decoupling Control of Vibration Isolation Platform with Eight Actuators

Active Vibration Isolation Platform with Eight Pneumatic Actuators

Six-degree-of-freedom active vibration isolation using a stewart platform mechanism

Design, analysis and semi-active control of a quasi-zero stiffness vibration isolation system with six oblique springs

Simultaneous Decoupling Control of Translation and Rotation for a 6-DOF Vibration Isolator Based on the Stewart Platform

Six degree-of-freedom active vibration control using the Stewart platforms

Design Of An Active Low Frequency Vibration Isolation System For Atom Interferometry By Using Sliding Mode Control

Control and experimental study of 6-DOF vibration isolation platform with magnetorheological damper