Abstract:Currently, it is still a great challenge to obtain copper-based high-efficient dropwise condensation heat transfer (CHT) interfaces via template-free electrodepositing technologies. Here, we report that the density of template-free electrodeposited copper nanocones can maximally reach 1.5 × 106/mm2 by the synergistic control of substrate surface roughness, poly(ethylene glycol) (PEG) molecular weight, and PEG concentration. After thiol modification, the densely packed copper nanocone samples can present low-adhesive superhydrophobicity and condensate microdrop self-jumping function at ambient environment. Condensation heat and mass transfer characterizations show that the CHT coefficient of copper surfaces can maximally enhance 98% for 20 °C vapor and 51% for 40 °C vapor by in situ growth of superhydrophobic densely packed copper nanocones. Although the dropwise condensation mode can change from the jumping mode to the mixed jumping and sweeping mode and the shedding-off mode along with the increase of surface subcooling and vapor temperature, the CHT performance of the nanosample is still superior to that of the contrast flat hydrophobic surface during the whole testing range of surface subcooling. As vapor temperature increases to 80 °C, the CHT performance of the nanosample is inferior to that of the contrast sample. The CHT enhancement under low-temperature vapor should be ascribed to the enhancement of small-drop mass transfer ability caused by low-adhesive superhydrophobicity nature of nanosample surfaces. Their performance degradation mainly results from increased drop-drop drag force along with the increase of surface subcooling and vapor temperature. In sharp contrast, the CHT deterioration under high-temperature vapor should be ascribed to larger drop-surface adhesion and drop-drop drag force. The former is caused by vapor penetration, whereas the latter is caused by the dramatically increased nucleation density and growth rate of condensates. These findings would help design and develop copper-based high-efficiency condensation heat transfer interfaces.

Development of an Efficient and Controllable Nano-porous Copper with Good Wettability and Capillary Performance for Wicks of Vapor Chamber

Density Maximization of One-Step Electrodeposited Copper Nanocones and Dropwise Condensation Heat-Transfer Performance Evaluation

Dual-scale porous/grooved microstructures prepared by nanosecond laser surface texturing for high-performance vapor chambers

Vapor chamber with two-layer liquid supply evaporator wick for high-heat-flux devices

Fabrication and capillary characterization of multi-scale micro-grooved wicks with sintered copper powder

Fabrication and characterization of ultra-thin vapour chambers with printed copper powder wick

A Compatible and Efficient Fabrication of Bi-Continuous Nanoporous Copper Films

Investigation on fabrication and capillary performance of multi-scale composite porous wick made by alloying-dealloying method

Silicon Vapor Chamber with Hierarchical Micro-/Nano Wicks

Capillary Performance of Nanoporous Aluminum Braided Wicks Prepared by Anodic Oxidation

Copper-based high-efficiency condensation heat transfer interface consisting of superhydrophobic hierarchical microgroove and nanocone structure

Formation of Monolithic Nanoporous Copper with Ultrahigh Specific Surface Area Through Chemical Dealloying of Mg-Cu Alloy

Biomimetic Copper Forest Structural Modification Enhances the Capillary Flow Characteristics of the Copper Mesh Wick

Capillary Wicking in Double-Scale Composite Microgroove Wicks for Copper-Aluminum Composite Vapor Chambers

Experimental Investigation of Capillary Force in a Novel Sintered Copper Mesh Wick for Ultra-Thin Heat Pipes

Nanoporous Copper Films with High Surface Area Formed by Chemical Dealloying from Electroplated CuZn Alloy

High-Performance Bioinspired Hierarchical Microgroove Wick for Ceramic Vapor Chambers Achieved by Nanosecond Pulsed Lasers.

Achieving robust and enhanced pool boiling heat transfer using micro–nano multiscale structures

Enhanced capillary performance of nanostructures copper woven mesh wick for ultrathin heat pipes

Enhanced evaporation performance on a novel microstructured surface with vertical dimension gradient

Formation and characterization of Monolithic nanoporous copper by chemical dealloying of Al-Cu alloys