Abstract:The precise determination of Cd isotope ratios via multi-collector inductively coupled plasma mass spectrometry (MC-ICP-MS) has made the widespread application of Cd isotopes possible. However, previous studies are complicated by the chemical purification method and molecular interferences from Zn (e.g.(ZnAr+)-Zn-70-Ar-36, (ZnAr+)-Zn-68-Ar-38, and (ZnAr+)-Zn-66-Ar-40 on Cd-106(+), (ZnAr+)-Zn-70-Ar-38 and (ZnAr+)-Zn-68-Ar-40 on Cd-108(+), (ZnAr+)-Zn-70-Ar-40 on Cd-110(+)). Separation of Zn from Cd requires the usage of a toxic reagent (HBr) and is also complicated by the relatively high procedural Zn blank especially when only a very small amount of Cd is available. Here we present a high-precision Cd isotope measurement method using double spike MC-ICP-MS, which avoids the molecular interferences from Zn introduced by both sample and chemical purification. A Cd-111-Cd-113 double spike pair optimized for the Cd-111, Cd-112, Cd-113, and Cd-114 inversion was used to correct for the mass bias. Elemental doping experiments suggest that the measured Cd isotope data were not significantly affected when the measured solution has, Zn/Cd < 10(3), Pd/Cd < 10(2), Fe/Cd < 10(-2), In/Cd < 10(-3), Sn/Cd < 10(-1), Zr/Cd < 10(-2), Nb/Cd < 10(-1), Mo/Cd < 10(-2), Ru/Cd < 10(-2), Ga/Cd < 10(-2), Ge/Cd < 10(-2), Se/Cd < 10(-1), and As/Cd < 10(-1). We thus modified the chemical purification method by removing the HBr step and eluting Zn and Cd together. The minimum requirement of sample size for precise measurement of stable Cd isotope ratios was tested to be as low as 10 ng. The measurements of pure Cd solutions (BAM I012 Cd and HPS Cd) give a long-term intermediate precision for delta Cd-114/110 relative to NIST SRM 3108 of 0.05 parts per thousand. We further validated our method by measuring different reference materials covering a relatively wide range of Zn/Cd (similar to 9 to 1239), the results of which agree within uncertainty with previous studies. Our study thus provides an efficient and precise way to determine stable Cd isotope ratios of geological samples with relatively low Cd concentrations.

Quantifying 224ra/228th Disequilibrium in Sediments Via a Pulsed Ionization Chamber (PIC)

Measurement of 224Ra in water via pulsed ionization chamber (PIC) radon detector

Direct analysis of radium-226 in sediment by ICP-MS: an analytical challenge?

Determination of Picogram-per-Gram Concentrations of 231pa and 230th in Sediments by Melt Quenching and Laser Ablation Mass Spectrometry

Development of a novel method for rapid and accurate determination of Ra-226 activity in soil by NaI (TI) spectrometer

Rapid determination of plutonium isotopes in small samples using single anion exchange separation and ICP-MS/MS measurement in NH3–He mode for sediment dating

A practical approach of measuring $^{238}$U and $^{232}$Th in liquid scintillator to sub-ppq level using ICP-MS

Direct determination of the 237Np/238U ratio in nuclear fuel samples by multicollection inductively coupled plasma mass spectrometry (MC-ICP-MS)

Isotopic Ratio of ~(240)Pu/~(239)Pu Measurements under Interference of Uranium by Inductively Coupled Plasma-Mass Spectrometry with Direct Sampling Insertion

An Accurate Method for the Determination of 226ra Activity Concentrations in Soil

A Practical Soil Radon （^222rn） Measurement Method

Rapid Method for Sequential Determination of Pu and Am in Soil and Sediment Samples by Sector-Field Inductively Coupled Plasma Mass Spectrometry

Determination of uranium isotopes in marine sediments and seawaters by SF ICP-MS after rapid chemical separation using TK200 resin

Improvements in the determination of attogram-sized 231Pa in dissolved and particulate fractions of seawater via multi-collector inductively coupled plasma mass spectrometry

Rubidium Isotope Measurements of Low‐Rb Geological Materials by MC‐ICP‐MS

Decay/ingrowth Uncertainty Correction of (210)po/(210)pb in Seawater.

Optimized measurement of radium-226 concentration in liquid samples with radon-222 emanation

An Instrument for Measuring the Unattached Fraction of Radon Progeny with Etched Track Detectors

Precise/small sample size determination of stable Cd isotope ratios of geological samples with double spike MC-ICP-MS

An Instrument for Measuring Equilibrium-Equivalent 222rn and 220rn Concentrations with Etched Track Detectors.

A high-resolution dialysis technique for rapid determination of dissolved reactive phosphate and ferrous iron in pore water of sediments