Abstract:Photonic switches have attractive application prospects in optical communication data networks that require dynamic reconfiguration. Integrating optical switching devices with optical fiber, the most widely deployed photonic technology platform, can realize signal transmission and processing in practical applications. Here, we demonstrate the multilevel optical switching using the phase-change material Ge2Sb2Te5 (GST) integrated on a graded-index multimode fiber. This switching process works by exploiting the significant difference in extinction coefficient between the crystalline state and the amorphous state of the GST. Using GST to achieve the switch function, no external energy source is needed to maintain the existing state of the switch, and the device is nonvolatile. This multi-level optical switch is an all-fiber integrated device. We apply GST to the end facets of the graded-index multimode fiber by magnetron sputtering, which is a reflective structure. A pulsing scheme is used to control the optical propagation state of the optical modulation signal to realize the switching function. It can store up to 11 non-volatile reliable and repeatable levels encoded by the pump source laser with a wavelength of 1550 nm. At the same time, the switching process between states is on the order of hundreds of nanoseconds. The present experimental results demonstrate the feasibility of 11 multilevel states in the field of optical fibers commonly used in communications. It can be well coupled with the all-fiber terminal device. It also shows that the device is still applicable in the 1525 nm∼1610 nm broadband range, promising for designing future multilevel photonic switches and memory devices.

Multi-Channel Network of the Optical Hitless Wavelength-Selective Switches Using the MZI-Embedded MRR

Hitless Wavelength-Selective Switch Based on Single Microring Resonator Embedded with an Equal Armed MZI

Multi-channel Optical Switching Based on Scanning Mirror Instrumentation

Hitless Wavelength-Selective Switch Using a Single Microring Resonator Assisted With a Symmetric MZI

Three-wavelength Rearrangeable 3×3 Photonic Switch

All-optically Modulated Nonvolatile Optical Switching Based on a Graded-Index Multimode Fiber.

Silicon-Based MZI-Embedded Microring Array with Hitless and FSR-Alignment-Free Wavelength Selection

Mach-Zehnder Based Optical Switches in Silicon-On-Insulator

Design and fabrication of MMI-MZI optical switch in GaAs/GaAlAs

Fano-resonance-based Mach-Zehnder Optical Switch Employing Dual-Bus Coupled Ring Resonator As Two-Beam Interferometer.

Ring-resonator-assisted Optical Switch with High Extinction Ratio

&Lt;title>design and Fabrication of MMI-MZI Optical Switch in GaAs/GaAIAs</title>

Hitless Two-Dimensional Focal Plane Switch Array Based on MZI-embedded MRRs

All-fiber Optical Mode Switching Based on Cascaded Mode Selective Couplers for Short-Reach MDM Networks

1 x N (N=2, 8) Silicon Selector Switch for Prospective Technologies at the 2 m Waveband

High-performance Silicon PIN Diode Switches in the 2-Μm Wave Band.

Analysis on Multimode Interference Coupler-Based 1×3 Optical Switch with Mono-Compound Modulation Region

Investigation of a Novel Wide-Spectrum Polymer Electro-Optic Switch with High Extinction Ratio over 40 Db Covering S-C-L Band

Optimal design and simulation of a symmetric wide spectrum Mach-Zehnder electro-optic switch

Short-pulse Controlled Optical Switch Using External Cavity Based Single Mode Fabry-Pérot Laser Diode.

A novel MMI-MZ all-optical switch