Abstract:Water gas shift (WGS) reaction commonly converts CO to CO 2 using H 2 O and produces H 2 and CO 2 in a catalytic fixed bed reactor. This study aims to develop a Cu/ZnO/ZSM-5 catalyst loaded in water gas shift reactor for converting typical synthesis gas produced from dry reforming of methane (DRM) at medium temperature shift (MTS, 200–350 o C) conditions and for preventing reverse reaction due to high feed concentrations of CO 2 and H 2 . The Cu/ZnO/ZSM-5 catalyst was prepared by impregnation method with lower Cu metal loading of 5, 10, and 15 wt%, respectively, compared to commercial catalysts. The synthesized catalyst was characterized using XRF, XRD, SEM, H 2 -TPR, NH 3 -TPD, and TGA. The catalyst activity and stability for the WGS reaction were tested in the fixed bed reactor at atmospheric pressure and temperature of 325 °C. The experimental results show that CO conversion increases with increasing Cu loading. The 15 wt% Cu/ZnO/ZSM-5 catalyst showed the best results with a CO conversion of 35% and a yield of H 2 of 36% and showed good stability for 32 h. Based on the TGA, the 15 wt% Cu/ZnO/ZSM-5 catalyst forms a 0.04 g carbon/g catalyst, which is much lower when compared to commercial catalyst (0.105 g carbon/g catalyst). The relative activity of the synthesized catalyst indicates 2.4 times better when compared to commercial catalysts. High concentrations of H 2 and CO 2 in the feed may initiate side reactions, including reverse WGS, methanation, and carbon formation, which will decrease H 2 yield.

MOF-derived Bimetallic Core–shell Catalyst HZSM-5@ZrO2–In2O3: High CO2conversion in Reverse Water Gas Shift Reaction

MOF-derived Bimetallic Core-shell Catalyst HZSM-5@ZrO2-In2O3: High CO2 Conversion in Reverse Water Gas Shift Reaction

Synergistic effect between In2O3 and ZrO2 in the reverse water gas shift reaction

A Monodispersed Spherical Zr-Based Metal-Organic Framework Catalyst, Pt/Au@Pd@UIO-66, Comprising an Au@Pd Core-Shell Encapsulated in a UIO-66 Center and Its Highly Selective CO 2 Hydrogenation to Produce CO.

Support-Dependent Cu–In Bimetallic Catalysts for Tailoring the Activity of Reverse Water Gas Shift Reaction

UIO66-membranized SAPO-34 Pt catalyst for enhanced carbon dioxide conversion efficiency

UIO<sub>66</sub>-membranized SAPO-34 Pt catalyst for enhanced carbon dioxide conversion efficiency

Efficient Reduction of CO2 to CO Using Cobalt-Cobalt Oxide Core-Shell Catalysts

Design of Cu/MoOx for CO2 Reduction via Reverse Water Gas Shift Reaction

Mo-based bimetallic oxide catalysts for the reverse water gas shift reaction

Core-shell MOF-derived Fe3C-Co-NC as high-performance ORR/OER bifunctional catalyst

Construction of ZIF-67-On-UiO-66 Catalysts as a Platform for Efficient Overall Water Splitting.

Pt‐Mo2N Catalyst Formed by Inverse Sintering for the Reverse Water‐Gas Shift Reaction

Core-shell structured CuO-ZnO@H-ZSM-5 catalysts for CO hydrogenation to dimethyl ether

Designing multi-layered MOF-on-MOF-transformed core double-shell FeSx@ZnS@CoSx heterojunction for enhanced CO2 photoreduction with water vapor

Cu and Cu-Fe Bi-Metal Nanoparticles Encapsulated in Hollow S-1 Zeolite for Reverse Water Gas Shift Reaction

Cu@ZIF-8 derived inverse ZnO/Cu catalyst with sub-5 nm ZnO for efficient CO2 hydrogenation to methanol

Cu/MgO Reverse Water Gas Shift Catalyst with Unique CO2 Adsorption Behaviors

Converting CO2 Hydrogenation Products from Paraffins to Olefins: Modification of Zeolite Surface Properties by a UIO-n Membrane

Catalytic enhancement of water gas shift reaction with Cu/ZnO/ZSM-5: Overcoming challenges of CO 2 and H 2 rich feeds

Towards Maximizing the In2O3/m-ZrO2 Interfaces for CO2-to-methanol Hydrogenation.