Cu@ZIF-8 derived inverse ZnO/Cu catalyst with sub-5 nm ZnO for efficient CO2 hydrogenation to methanol

Yazhi Yin,Xinlin Hong,Bing Hu,Guoliang Liu,Dengdeng Wu,Zixin Zhong

DOI: https://doi.org/10.1039/C8CY02546K

IF: 6.177

2019-05-20

Catalysis Science & Technology

Abstract:Cu@ZIF-8 derived inverse ZnO/Cu with sub-5 nm ZnO acts as an efficient catalyst for CO2 hydrogenation to methanol.

Chemistry,Materials Science

What problem does this paper attempt to address?

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Wenze Li,Peng Lu,Ding Xu,Kai Tao

DOI: https://doi.org/10.1007/s11814-017-0278-8

IF: 2.7

2017-01-01

Korean Journal of Chemical Engineering

Abstract:Reduced Cu/ZnO catalyst was synthesized through solid phase grinding of the mixture of oxalic acid, copper nitrate and zinc nitrate, followed by subsequent calcination in N-2 atmosphere without further H-2 reduction. The catalysts were characterized by various techniques, such as XRD, TG-DTA, TPR and N2O chemisorption. Characterization results suggested that during the calcination in N-2, as-ground precursor (oxalate complexes) decomposed to CuO and ZnO, releasing considerable amount of CO, which could be used for in situ reduction of CuO to Cu-o. The in situ reduced O/I-Cu/ZnO catalyst was evaluated in CO2 hydrogenation to methanol, which exhibited superior catalytic performance to its counterpart O/H-Cu/ZnO catalyst obtained through conventional H-2 reduction. The decomposition of precursor and reduction of CuO happened simultaneously during the calcination in N-2, preventing the growth of active Cu-0 species and aggregation of catalyst particles, which was inevitable during conventional H-2 reduction process. This method is simple and solvent-free, opening a new route to prepare metallic catalysts without further reduction.
Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

Congyi Wu,Lili Lin,Jinjia Liu,Jingpeng Zhang,Feng Zhang,Tong Zhou,Ning Rui,Siyu Yao,Yuchen Deng,Feng Yang,Wenqian Xu,Jun Luo,Yue Zhao,Binhang Yan,Xiao-Dong Wen,José A. Rodriguez,Ding Ma

DOI: https://doi.org/10.1038/s41467-020-19634-8

IF: 16.6

2020-11-13

Nature Communications

Abstract:Abstract Enhancing the intrinsic activity and space time yield of Cu based heterogeneous methanol synthesis catalysts through CO 2 hydrogenation is one of the major topics in CO 2 conversion into value-added liquid fuels and chemicals. Here we report inverse ZrO 2 /Cu catalysts with a tunable Zr/Cu ratio have been prepared via an oxalate co-precipitation method, showing excellent performance for CO 2 hydrogenation to methanol. Under optimal condition, the catalyst composed by 10% of ZrO 2 supported over 90% of Cu exhibits the highest mass-specific methanol formation rate of 524 g MeOH kg cat −1 h −1 at 220 °C, 3.3 times higher than the activity of traditional Cu/ZrO 2 catalysts (159 g MeOH kg cat −1 h −1 ). In situ XRD-PDF, XAFS and AP-XPS structural studies reveal that the inverse ZrO 2 /Cu catalysts are composed of islands of partially reduced 1–2 nm amorphous ZrO 2 supported over metallic Cu particles. The ZrO 2 islands are highly active for the CO 2 activation. Meanwhile, an intermediate of formate adsorbed on the Cu at 1350 cm −1 is discovered by the in situ DRIFTS. This formate intermediate exhibits fast hydrogenation conversion to methoxy. The activation of CO 2 and hydrogenation of all the surface oxygenate intermediates are significantly accelerated over the inverse ZrO 2 /Cu configuration, accounting for the excellent methanol formation activity observed.

multidisciplinary sciences
Cu-supported nano-ZrZnOx as a highly active inverse catalyst for low temperature methanol synthesis from CO2 hydrogenation

Yangzhi Xu,Zirui Gao,Yao Xu,Xuetao Qin,Xin Tang,Zhiwei Xie,Jinrong Zhang,Chuqiao Song,Siyu Yao,Wu Zhou,Ding Ma,Lili Lin

DOI: https://doi.org/10.1016/j.apcatb.2023.123656

2024-05-01

Abstract:Hydrogenation of CO2 into methanol at low-temperature on Cu-based catalysts is of great significance, but remains challenging to enhance activity. In this paper, we report an inverse catalyst constructed with nano-ZrZnOx supported on Cu particles with outstanding methanol synthesis performance at 220 ℃, two times higher than that of commercial Cu/ZnO/Al2O3 catalysts under the same conditions. Detailed structure characterization and performance evaluation demonstrate that the ZrZnOx mixed oxide serves as the most active oxide-metal interface site for CO2 hydrogenation. The ZrZnOx/Cu inverse catalyst increases the weak and medium CO2 adsorption sites which are further demonstrated responsible to the methanol productivity. In situ DRIFTs studies reveal that the inverse interface accelerates the reduction of asymmetric formate intermediates and prevents the generation of CO. The combination of enhanced CO2 activation capability and accelerated hydrogenation rate of intermediates over the ZrZnOx/Cu inverse catalyst probably contribute to the remarkable methanol synthesis performance from CO2.

chemistry, physical,engineering, chemical, environmental
A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Yanan Xu,Zhihong Gao,Li Peng,Kang Liu,Yang Yang,Rongxing Qiu,Shuliang Yang,Chenhao Wu,Jiaheng Jiang,Yanliang Wang,Wenjun Tan,Hongtao Wang,Jun Li

DOI: https://doi.org/10.1016/j.jcat.2022.09.011

IF: 7.3

2022-10-01

Journal of Catalysis

Abstract:The ternary Cu/ZnO/Al2O3 catalyst is usually employed for producing methanol from syngas (CO/CO2/H2) or from CO2 hydrogenation in industry. However, this catalyst often suffers from the aggregation of Cu nanoparticles and the phase separation of Cu and ZnO. In this work, a highly efficient and stable catalyst (Cu/ZnOx/ZrO2) for CO2 hydrogenation to methanol is prepared via co-precipitation method with UiO-66 as structural template. Cu/Zn is effectively combined and encapsulated in the channels of UiO-66, which avoids the aggregation of metal particles. The ZrO2 support derived from UiO-66 enhances the interaction between the support and Cu/Zn, and thus improves the catalytic performance significantly. This catalyst shows a high space–time yield of 216.7 g(MeOH)·kg(cat)−1·h−1 at 260 °C, 4 MPa and GHSV = 12000 h−1. Furthermore, the catalyst shows good stability over a period of 50 h on stream. The performance of Cu/ZnOx/ZrO2 is much better than that of commercial catalysts and most of catalysts previously reported.

chemistry, physical,engineering, chemical
Optimizing Methanol Synthesis from CO2 Hydrogenation over Inverse Zr-Cu Catalyst

Maolin Wang,Yao Xu,Haoyi Tang,Shuheng Tian,Lingzhen Zeng,Haoyu Li,Congyi Wu,Zhibiao Hu,Min Su,Heng Zheng,Meng Wang,Ding Ma

DOI: https://doi.org/10.1016/j.checat.2024.100985

2024-01-01

Chem Catalysis

Abstract:CO2 hydrogenation to methanol is a pivotal route for CO2 conversion and fixation, with Cu-based catalysts currently exhibiting superior performance. However, the majority of reported Cu-based catalysts lack a comparison with commercial Cu-based catalysts employed in methanol synthesis from syngas. Furthermore, there are limited research works on the effect of sizes of Cu particle to catalyst performance, especially for inverse Cu catalysts, which is a promising catalyst with highly active ZrOx-Cu interface. By precisely controlling the synthesis method to regulate the particle size of Cu in Zr-Cu inverse catalysts, we illustrated that the copper surface area plays a predominant role in influencing catalytic activity. Additionally, the presence of highly dispersed ZrOx clusters on the surface of Cu particles not only enhances the space-time yield of methanol but also serves to segregate Cu particles and to inhibit sintering. The unique structure of Zr-Cu inverse catalysts leads to comparable reactivity to the commercial Cu catalysts.
High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

Heng Zhang,Jiyi Chen,Xiaoyu Han,Yutong Pan,Ziwen Hao,Shixiong Tang,Xiaohui Zi,Zhenmei Zhang,Pengju Gao,Maoshuai Li,Jing Lv,Xinbin Ma

DOI: https://doi.org/10.1021/acs.iecr.4c00357

2024-03-28

Industrial & Engineering Chemistry Research

Abstract:Cu/ZnO/Al2O3 catalysts are widely used in methanol synthesis due to their low cost and high catalytic activity. The structural and surface characteristics of Cu are crucial to the formation of the active sites for methanol production. In this study, a series of methods for the synthesis of Cu/ZnO/Al2O3 are employed to modulate the catalyst structure and catalytic efficiency for the hydrogenation of CO2 to methanol. A correlation of catalytic activity with the Cu0 surface area and Cu particle sizes has been established. The Cu/ZnO/Al2O3 catalyst derived from hydrotalcite-like precursor (CZA-LDH) exhibits the maximum Cu0 specific surface area, the smallest Cu particle size, and high dispersion of elements, yielding the largest methanol production rate, which is comparable to the commercial Cu catalyst. Stability testing shows that the CZA-LDH catalyst can retain ∼94% of the initial activity. The in situ Fourier transform infrared spectroscopy analysis indicates that HCOO*, CH3O* intermediates, and product CH3OH are generated on the catalyst surface, and the reaction follows the formate pathway.

engineering, chemical
The Role of Cu1–O3 Species in Single-Atom Cu/ZrO2 Catalyst for CO2 Hydrogenation

Huibo Zhao,Ruofan Yu,Sicong Ma,Kaizhuang Xu,Yang Chen,Kun Jiang,Yuan Fang,Caixia Zhu,Xiaochen Liu,Yu Tang,Lizhi Wu,Yingquan Wu,Qike Jiang,Peng He,Zhipan Liu,Li Tan

DOI: https://doi.org/10.1038/s41929-022-00840-0

IF: 37.8

2022-01-01

Nature Catalysis

Abstract:Copper-based catalysts for the hydrogenation of CO2 to methanol have attracted much interest. The complex nature of these catalysts, however, renders the elucidation of their structure–activity properties difficult. Here we report a copper-based catalyst with isolated active copper sites for the hydrogenation of CO2 to methanol. It is revealed that the single-atom Cu–Zr catalyst with Cu1–O3 units contributes solely to methanol synthesis around 180 °C, while the presence of small copper clusters or nanoparticles with Cu–Cu structural patterns are responsible for forming the CO by-product. Furthermore, the gradual migration of Cu1–O3 units with a quasiplanar structure to the catalyst surface is observed during the catalytic process and accelerates CO2 hydrogenation. The highly active, isolated copper sites and the distinguishable structural pattern identified here extend the horizon of single-atom catalysts for applications in thermal catalytic CO2 hydrogenation and could guide the further design of high-performance copper-based catalysts to meet industrial demand. Copper-based catalysts are traditionally very effective for the hydrogenation of CO2 to methanol, although control over the active site has remained elusive. Here, the authors design a Cu1/ZrO2 single-atom catalyst featuring a Cu1–O3 site responsible for a remarkable performance at 180 °C.
Cu/ZnO x @UiO-66 synthesized from a double solvent method as an efficient catalyst for CO 2 hydrogenation to methanol

Yang Yang,Yanan Xu,Heng Ding,Dong Yang,Enping Cheng,Yiming Hao,Hongtao Wang,Yanzhen Hong,Yuzhong Su,Yanliang Wang,Li Peng,Jun Li

DOI: https://doi.org/10.1039/d0cy02450c

2021-01-01

Abstract:The Cu precursor diffused into UiO-66 by the double solvent method is reduced by NaBH 4 to form Cu nanoparticles. After introducing Zn 2+ , Cu/ZnO x @UiO-66 reduced by H 2 is synthesized, which catalyzes the hydrogenation of CO 2 to methanol efficiently.

chemistry, physical
Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Shiwei Wang,Jinhai Yang,Shiqiang Wang,Ning Zhao,Fukui Xiao

DOI: https://doi.org/10.1016/j.fuproc.2023.107789

IF: 8.129

2023-08-01

Fuel Processing Technology

Abstract:CO2 hydrogenation to methanol is an important technology for carbon utilization which not only provides a solution to the greenhouse gas mitigation but also produces value-added products. Copper-based catalyst has always been the research focus of the process. Cu1.5Mn1.5O4 spinel has become an interesting alternative because it contains more oxygen defects and highly dispersed copper species that promote the CO2 adsorption and conversion. In this paper, the effects of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for hydrogenation of CO2 to methanol were studied. It was found that after Zn modification, the catalytic performance of the catalyst was greatly improved. Among all catalysts, Cu3MnZn0.5Zr0.5 has the best CO2 conversion (7.14%) and methanol selectivity (69.74%) at 260 °C and 5 MPa. XPS analysis showed that doped Zn replaced the position of Cu in Cu1.5Mn1.5O4 spinel, forming the ZnOx and then increasing the content of oxygen defects, which resulted in the higher methanol selectivity. The increased Cu content promoted the activation of H2 and the rate of *CO3 hydrogenation to *HCOO, which in turn increases the conversion of CO2.

energy & fuels,engineering, chemical,chemistry, applied
Precise Confinement and Position Distribution of Atomic Cu and Zn in ZSM-5 for CO2 Hydrogenation to Methanol

Hongxin Ding,Jinwen Zhang,Wenhua Feng,Qingying Yao,Li Zhang,Yuanhang Ren,Lin Ye,Bin Yue,Heyong He

DOI: https://doi.org/10.3390/nano13233053

IF: 5.3

2023-11-29

Nanomaterials

Abstract:CuZn-based catalysts are widely used in CO2 hydrogenation, which may effectively convert CO2 to methanol and alleviate CO2 emission issues. The precise design of a model catalyst with a clear atomic structure is crucial in studying the relationship between structure and catalytic activity. In this work, a one-pot strategy was used to synthesize CuZn@ZSM-5 catalysts with approximately two Cu atoms and one Zn atom per unit cell. Atomic Cu and Zn species are confirmed to be located in the [54.6.102] and [62.104] tilings, respectively, by using magic-angle spinning nuclear magnetic resonance spectroscopy (MAS NMR), synchrotron X-ray powder diffraction (SXRD) and high-signal-to-noise-ratio annular dark field scanning transmission electron microscopy (High SNR ADF-STEM). Catalytic hydrogenation of CO2 to methanol was used as a model reaction to investigate the activity of the catalyst with confined active species. Compared to the Cu@ZSM-5, Zn@ZSM-5 and their mixture, the CuZn@ZSM-5 catalyst with a close Cu–Zn distance of 4.5 Å achieves a comparable methanol space–time yield (STY) of 92.0 mgmethanol·gcatal−1·h−1 at 533 K and 4 MPa with high stability. This method is able to confine one to three metal atoms in the zeolite channel and avoid migration and agglomeration of the atoms during the reaction, which maintains the stability of the catalyst and provides an efficient way for adjustment of the type and number of metal atoms along with the distances between them in zeolites.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Hollow structured Cu@ZrO2 derived from Zr-MOF for selective hydrogenation of CO2 to methanol

Xiaoyu Han,Maoshuai Li,Xiao Chang,Ziwen Hao,Jiyi Chen,Yutong Pan,Sibudjing Kawi,Xinbin Ma

DOI: https://doi.org/10.1016/j.jechem.2022.03.034

IF: 13.1

2022-08-01

Journal of Energy Chemistry

Abstract:The development of a highly efficient catalyst for CO2 activation and selective conversion to methanol is critical to address the issues associated with the high thermal stability of CO2 and controllable synthesis of methanol. Cu-based catalysts have been widely studied because of the low cost and excellent performance in mild conditions. However, the improvement of catalytic activity and selectivity remains challenging. Herein, we prepared hollow Cu@ZrO2 catalysts through pyrolysis of Cu-loaded Zr-MOF for CO2 hydrogenation to methanol. Low-temperature pyrolysis generated highly dispersed Cu nanoparticles with balanced Cu0/Cu+ sites, larger amounts of surface basic sites and abundant Cu-ZrO2 interface in the hollow structure, contributing to enhanced catalytic capacity for adsorption/activation of CO2 and selective hydrogenation to methanol. In situ Fourier Transform Infrared Spectroscopy revealed the methanol formation followed the formate-intermediated pathway. This work would provide a guideline for the design of high-performance catalysts and the understanding of the mechanism and active sites for CO2 hydrogenation to methanol.

chemistry, physical,engineering, chemical, applied,energy & fuels
Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Hangjie Li,Liang Wang,Xinhua Gao,Feng-Shou Xiao

DOI: https://doi.org/10.1021/acs.iecr.2c00172

2022-01-01

Industrial & Engineering Chemistry Research

Abstract:A Cu/ZnO/Al2O3 catalyst has been extensively studied in CO2 hydrogenation to methanol, where the methanol selectivity usually decreases with increasing CO2 conversion because of the thermodynamically oriented CO production. Herein, we found that the CO2 conversion and methanol selectivity over the Cu/ZnO/Al2O3 catalyst could be simultaneously improved through zirconia modulation (CZAZ). The structural characterizations show that the zirconia efficiently increases both the surface area and Cu dispersion on the catalyst. In the CO2-to-methanol transformation, it is found that the zirconia could significantly hinder the decomposition of the CH3O* intermediate to benefit its hydrogenation to methanol, a crucial step in this transformation. These features simultaneously optimized the CO2 conversion and methanol selectivity, giving methanol space-time productivity at 1376 g(MeOH)/(kg(cat)center dot h). In addition, the CZAZ catalyst was durable in a continuous test for 200 h over a wide temperature range of 200-250 degrees C, which is important for its potential application.
Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

WANG Shiwei,YANG Jinhai,ZHOU Hongli,XIAO Fukui,ZHAO Ning,Shiwei WANG,Jinhai YANG,Hongli ZHOU,Fukui XIAO,Ning ZHAO

DOI: https://doi.org/10.1016/s1872-5813(23)60391-3

2024-03-01

Journal of Fuel Chemistry and Technology

Abstract:A series of Cu-Mn-Zn/ZrO2 catalysts with different Zn contents were prepared by sol-gel method and characterized by XRD, BET, TPR, N2O-adsorption, XPS, TPD and in-situ DRIFTS. It was found that by increasing a certain amount of Zn, the catalytic activity for CO2 hydrogenation increased. Among all samples, Cu3MnZn0.5Zr0.5 (CMZZ-0.5) possessed the best CO2 conversion (6.5%) and methanol selectivity (73.7%) at 250 °C and 5 MPa. Characterization results showed that Zn entered the Cu1.5Mn1.5O4 spinel structure, forming ZnO x and thus more surface OH groups. This increased the content of Cu0 and Cu α , which improved the activation of H2 and CO2. The pathway of CO2 to methanol was also clarified through in-situ DRIFTS.
Core–shell structured Cu@m-SiO2 and Cu/ZnO@m-SiO2 catalysts for methanol synthesis from CO2 hydrogenation

Haiyan Yang,Peng Gao,Chen Zhang,Liangshu Zhong,Xiaopeng Li,Sheng Wang,Hui Wang,Wei Wei,Yuhan Sun

DOI: https://doi.org/10.1016/j.catcom.2016.06.010

IF: 3.51

2016-01-01

Catalysis Communications

Abstract:The core–shell catalysts with Cu and Cu/ZnO nanoparticles coated by mesoporous silica shells are prepared for CO2 hydrogenation to methanol. With the confined effect of silica shell, the size of Cu nanoparticles is only about 5.0nm, which results in high activity for CO2 conversion. The CH3OH selectivity is enhanced significantly with the introduction of ZnO. The core–shell structured catalysts endow the Cu nanoparticles trapped inside with excellent anti-aggregation and no deactivation is observed with time-on-stream. Therefore, the core–shell Cu/ZnO@m-SiO2 catalyst exhibits the maximum CH3OH yield with high stability.
Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

Yunshuo Wu,Haiqiang Wang,Zhongbiao Wu

DOI: https://doi.org/10.1039/d4ta05801a

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:The development of catalysts with high-density interfacial sites is crucial for enhancing catalytic performance. However, the efficient construction of interfacial sites remains a significant challenge. In this study, we introduced a ligand-regulated co-precipitation synthesis strategy to fabricate a Cu@ZnO1-x/Al2O3 catalyst. The catalyst possesses high-density partially-reduced ZnO1-x-Cu interfacial sites and exhibits enhanced activity for CO2 hydrogenation to methanol. The methanol space-time yield (STY) of the Cu@ZnO1-x/Al2O3 was 3.8 times higher than that of the commercial Cu/ZnO/Al2O3 after 14 h of continuous reaction. Molecular dynamics (MD) simulations and in situ Raman spectroscopy indicated that Cu-X-Zn linkage ligands formed in the precursor solution during hydrothermal treatment facilitated zinc-malachite formation during co-precipitation, which promoted Cu-ZnO interface formation during H-2 reduction. Moreover, density functional theory (DFT) calculations confirmed partially-reduced ZnO1-x-Cu interfaces were more active via the formate pathway. This work reveals a novel and robust route for designing catalysts with high-density interfacial sites, shedding light on catalyst development.
Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol

Yuchen Shi,Weiguang Su,Xinyu Wei,Yonghui Bai,Xudong Song,Peng Lv,Jiaofei Wang,Guangsuo Yu

DOI: https://doi.org/10.1016/j.jcis.2023.01.008

2023-04-15

Abstract:CO2 hydrogenation coupled with renewable energy to produce methanol is of great interest. Carbon coated In2O3 hollow tube catalysts embedded with ultra-low content ZnO quantum dots (QDs) were synthesized for CO2 hydrogenation to methanol. ZnO-In2O3-II catalyst had the highest CO2 and H2 adsorption capacity, which demonstrated the highest methanol formation rate. When CO2 conversion was 8.9%, methanol selectivity still exceeded 86% at 3.0 MPa and 320 °C, and STY of methanol reached 0.98 gMeOHh-1gcat-1 at 350 °C. The ZnO/In2O3 QDs heterojunctions were formed at the interface between ZnO and In2O3(222). The ZnO/In2O3 heterojunctions, as a key structure to promote the CO2 hydrogenation to methanol, not only enhanced the interaction between ZnO and In2O3 as well as CO2 adsorption capacity, but also accelerated the electron transfer from In3+ to Zn2+. ZnO QDs boosted the dissociation and activation of H2. The carbon layer coated on In2O3 surface played a role of hydrogen spillover medium, and the dissociated H atoms were transferred to the CO2 adsorption sites on the In2O3 surface through the carbon layer, promoting the reaction of H atoms with CO2 more effectively. In addition, the conductivity of carbon enhanced the electron transfer from In3+ to Zn2+. The combination of the ZnO/In2O3 QDs heterojunctions and carbon layer greatly improved the methanol generation activity.
Insights into the interfacial structure of Cu/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: Effects of Cu-supported nano-ZrO2 inverse interface

Yangzhi Xu,Maolin Wang,Zhiwei Xie,Dong Tian,Guan Sheng,Xin Tang,Haibo Li,Yichao Wu,Chuqiao Song,Xiaofeng Gao,Siyu Yao,Ding Ma,Lili Lin

DOI: https://doi.org/10.1016/j.cej.2023.144006

IF: 15.1

2023-08-01

Chemical Engineering Journal

Abstract:The performance of Cu-based catalysts in the low temperature CO2 conversion to methanol highly correlates with interfacial structure. In this paper, the interfacial structure of Cu/ZrO2 catalysts is tuned by changing the molar ratio and precipitation sequence of Cu and Zr precursors in the oxalate precipitation method. Structural characterizations demonstrate that the interface structure gradually transforms from the conventional ZrO2-supported nano-Cu interface to the Cu-supported nano-ZrO2 inverse interface with the ascending Cu/Zr ratio. The space–time yield (STY) of methanol over 90 molCu% Cu/ZrO2 inverse catalyst is 518 gCH3OH/kgcat/h, which far exceeds that of the optimized 40 molCu% Cu/ZrO2 catalyst (351 gCH3OH/kgcat/h). The inverse catalyst also exhibits the best methanol selectivity and lowest apparent activation energy. The correlation of the exposed Cu surface area, Cu particle size, and CO2 adsorption capacity with STYmethanol reveal that there is an optimal coverage of fine ZrO2 particles and the Cu supported nano-ZrO2 inverse configuration is a more suitable structure for methanol synthesis from CO2. High-pressure in situ DRIFTS experiment shows that the adsorbed formate and methoxy intermediates over 90 molCu% Cu/ZrO2 inverse catalyst are more reactive for further hydrogenation. In addition, the inverse configuration is more favorable for the methanol desorption from surface. The enhanced hydrogenation ability and relatively weak oxygenates adsorption of Cu-supported nano-ZrO2 interface is probably the main reasons for the improved catalytic performances of inverse catalysts.

engineering, chemical, environmental
Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

Francesco Arena,Katia Barbera,Giuseppe Italiano,Giuseppe Bonura,Lorenzo Spadaro,Francesco Frusteri,F ARENA,K BARBERA,G ITALIANO,G BONURA,L SPADARO,F FRUSTERI

DOI: https://doi.org/10.1016/j.jcat.2007.04.003

IF: 7.3

2007-07-25

Journal of Catalysis

Abstract:A novel synthesis route based on reverse co-precipitation under ultrasound irradiation has led to Cu–ZnO/ZrO2 catalysts (Znat/Cuat, 0–3; ZrO2, 42–44 wt%) with a remarkable development of total surface area (SABET, 120–180 m2/g) and very high dispersion (3–58%) and exposure (MSA 9–63 m2/g) of the active Cu phase. The activity pattern in the hydrogenation of CO2 to CH3OH (TR, 433–533 K; PR, 1.0–3.0 MPa) was addressed in comparison with a commercial Cu–ZnO/Al2O3 methanol synthesis catalyst. Volcano-shaped trends in total and metal surface area signal an optimum zinc loading (Zn/Cu, 0.3–0.7), ensuring higher concentration of active sites and methanol productivity values, whereas the basic relationships among dispersion, reducibility, and TOF indicate a structurally sensitive character of the title reaction and a superior reactivity of poorly dispersed Cu particles. Thermodynamic analysis of the reaction stream revealed that methanol formation proceeds along a parallel path, whereas a stronger “water affinity” accounts for the poorer performance of the conventional alumina-based catalyst compared with zirconia-based ones.

chemistry, physical,engineering, chemical
Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst for enhanced CO2 -methanol conversion at low temperature and pressure

Jiyu Sun,Fangyuan Liu,Usman Salahuddin,Mudi Wu,Chunxiang Zhu,Xingxu Lu,Bo Zhang,Binchao Zhao,Zhiqiang Xie,Yunjiang Ding,Dongsheng Li,Chang-Yong Nam,Feng-Yuan Zhang,Pu-Xian Gao

DOI: https://doi.org/10.1016/j.cej.2022.140559

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:Cu-ZnO-Al2O3 is the most widely applied catalyst for CO2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al2O3 catalysts have been successfully demonstrated. By using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al2O3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h−1 kg−1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO2 dissociation.

engineering, chemical, environmental
Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu-ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2

David Kordus,Simon Widrinna,Janis Timoshenko,Mauricio Lopez Luna,Clara Rettenmaier,See Wee Chee,Eduardo Ortega,Osman Karslioglu,Stefanie Kühl,Beatriz Roldan Cuenya

DOI: https://doi.org/10.1021/jacs.4c01077

IF: 15

2024-03-14

Journal of the American Chemical Society

Abstract:The nature of the Cu-Zn interaction and especially the role of Zn in Cu/ZnO catalysts used for methanol synthesis from CO(2) hydrogenation are still debated. Migration of Zn onto the Cu surface during reaction results in a Cu-ZnO interface, which is crucial for the catalytic activity. However, whether a Cu-Zn alloy or a Cu-ZnO structure is formed and the transformation of this interface under working conditions demand further investigation. Here, ZnO/Cu(2)O core-shell cubic nanoparticles with...

chemistry, multidisciplinary

Cu@ZIF-8 derived inverse ZnO/Cu catalyst with sub-5 nm ZnO for efficient CO2 hydrogenation to methanol

CO2 Hydrogenation to Methanol over Cu/ZnO Catalysts Synthesized Via a Facile Solid-Phase Grinding Process Using Oxalic Acid

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

Cu-supported nano-ZrZnOx as a highly active inverse catalyst for low temperature methanol synthesis from CO2 hydrogenation

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Optimizing Methanol Synthesis from CO2 Hydrogenation over Inverse Zr-Cu Catalyst

High-Performance Cu/ZnO/Al 2 O 3 Catalysts for CO 2 Hydrogenation to Methanol

The Role of Cu1–O3 Species in Single-Atom Cu/ZrO2 Catalyst for CO2 Hydrogenation

Cu/ZnO x @UiO-66 synthesized from a double solvent method as an efficient catalyst for CO 2 hydrogenation to methanol

Effect of Cu and Zn on the performance of Cu-Mn-Zn/ZrO2 catalysts for CO2 hydrogenation to methanol

Precise Confinement and Position Distribution of Atomic Cu and Zn in ZSM-5 for CO2 Hydrogenation to Methanol

Hollow structured Cu@ZrO2 derived from Zr-MOF for selective hydrogenation of CO2 to methanol

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Performance of Cu-Mn-Zn/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: The effect of Zn content

Core–shell structured Cu@m-SiO2 and Cu/ZnO@m-SiO2 catalysts for methanol synthesis from CO2 hydrogenation

Synthesis of a Cu@ZnO1-x/Al2O3 Catalyst with High-Density ZnO1-x-Cu Interfacial Sites for Enhanced CO2 Hydrogenation to Methanol

Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol

Insights into the interfacial structure of Cu/ZrO2 catalysts for methanol synthesis from CO2 hydrogenation: Effects of Cu-supported nano-ZrO2 inverse interface

Synthesis, characterization and activity pattern of Cu–ZnO/ZrO2 catalysts in the hydrogenation of carbon dioxide to methanol

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst for enhanced CO2 -methanol conversion at low temperature and pressure

Enhanced Methanol Synthesis from CO 2 Hydrogenation Achieved by Tuning the Cu-ZnO Interaction in ZnO/Cu 2 O Nanocube Catalysts Supported on ZrO 2 and SiO 2