Abstract:Accident-tolerant fuel (ATF) cladding is currently being developed to enhance nuclear reactors' safety. Among the various materials considered, silicon carbide stands out due to its superior resistance to oxidation and low corrosion rate. Nevertheless, the generation of corium resulting from the use of these accident-tolerant fuel cladding materials, as well as the interaction between corium and concrete, remains uncertain and requires comprehensive investigation. This study represents the first exploration of the variation in corium behavior from a thermochemical perspective, specifically examining the transition in cladding composition from Zircaloy to silicon carbide applicable for all types of light water reactors (LWRs). The present sensitivity study involves utilizing the CORQUENCH code to incorporate an improved dry-out model for concrete with crust formation. The validity of the model is established by comparing its predictions to experimental data encompassing corium ablation, surface heat flux, and corium temperature using limestone-based common sand concrete (LCS). The findings from this study indicate that the adoption of silicon carbide cladding leads to significantly reduced concrete ablation during the interaction with molten corium. Furthermore, it is recommended to employ silicon carbide cladding in nuclear reactors due to the fact that the temperature of corium with SiC-based cladding decreases upon water injection. Conversely, corium with Zircaloy-based cladding experiences an increase in temperature, as the injected water reacts with the corium, generating substantial heat and explosive gases. Additionally, corium viscosity with silicon carbide cladding increases, impeding heat transfer to concrete, while the viscosity of corium with Zircaloy cladding decreases, intensifying heat transfer and ablation. Furthermore, a crucial aspect lies in the utilization of silicon carbide-based cladding, which effectively contributes to a notable reduction in the generation of highly combustible gases such as H 2 and CO, concurrently resulting in a considerable upsurge in the production of inert CO 2 gas. Conversely, contrasting outcomes are observed when employing Zircaloy-based fuel pin cladding material.

Synthesizing nuclear power plant fouling with fractal characteristics enables an in-depth study of concerned nuclear safety issues

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Microstructural understanding on the fouling behavior of crud on PWR fuel cladding surface

Numerical study on surface corrosion deposition of fuel elements and its influence on flow heat transfer

Crud deposition behavior on zirconium alloy fuel cladding in high-temperature pressurized water environments

Numerical Modeling of Microchannel Reactor with Porous Surface Microstructure Based on Fractal Geometry

Fouling on the secondary side of nuclear steam generator tube: Experimental and simulated study

Fuel Cladding Chemical Interactions for MOX Fuel in Fast Reactors

CRUD deposition induced multi-physics effects analysis in PWR

Study on coupling effect of CRUD growth and heat transfer on fuel rod

Effects of Porous Fuel Structure on the Irradiation-Induced Thermo-Mechanical Coupling Behavior in Monolithic Fuel Plates

Study on frictional behavior of SiCf/SiC composite clad tube clamping condition under nuclear irradiation

Experimental Study of the Fouling Characteristics in a Pilot-Scale Facility: Influence of the Fouling Surface

Study on corium-concrete interaction, heat transfer, and concrete ablation: Impact of replacing Zircaloy cladding with accident tolerant silicon carbide cladding on corium characteristics

Effect of Fouling Layer (Acid–Ash Reaction) on Low-Temperature Corrosion Covering Heating Surface in Coal-Fired Flue Gas

Fabrication of Co-Based Cladding Layer by Microbeam Plasma and Its Corrosion Mechanism to Molten Salt

Simulation Analysis of Fracture Process of Slag Deposits Surrounding Wall Tubes During Steam Sootblowing

Effects of Zn injection on corrosion behavior and crud deposition of FeCrAl fuel cladding under subcooled nuclear boiling condition in high-temperature pressurized water

In-situ sampling investigation of deposition and corrosion of convective heating surfaces in a grate type municipal solid waste incineration plant: a case study

Fretting Corrosion Performance Evaluation of Uncoated Cladding, Cr Coating Cladding and AlCrNbSiTi Coating Cladding

Uncertainty Quantification of Engineering Parameters for a Nuclear Reactor Loaded with Dispersed Fuel Particles