Abstract:Schematic diagram of carbon fibre composite structure. The impact of carbon fiber (CF) composites sizing with graphene oxide (GO) to form brick‐and‐mortar structures on their mechanical properties and thermal conductivity has not been closely examined. This study systematically investigates the effect of GO sheet size on the interfacial properties and thermal conductivity of CF composites. Three sizes of GO—small (0.11 μm), medium (0.33 μm), and large (0.97 μm)—were used to modify CF surfaces via layer‐by‐layer self‐assembly, forming the brick‐and‐mortar structures. The mechanical properties were assessed through flexural tests, interlaminar shear strength (ILSS) tests and tensile tests, while thermal conductivity was measured using a thermal constant analyzer. The results revealed that medium‐sized GO (GO‐M) significantly enhanced the interfacial strength and toughness of the composites. This improvement is attributed to the orderly arrangement of GO‐M on the CF surface, which enhances stress transfer between the fiber and the matrix. In contrast, small‐sized GO (GO‐S) tended to scatter, resulting in less effective reinforcement, while large‐sized GO (GO‐L) exhibited stacking and agglomeration, limiting its reinforcement effectiveness. However, GO‐L provided the highest thermal conductivity due to the formation of continuous heat conduction pathways. These findings suggest that GO‐M offers a balanced improvement in mechanical properties, whereas GO‐L is more suitable for applications requiring high thermal conductivity. This work underscores the importance of selecting the appropriate GO sheet size to optimize the interfacial properties and thermal conductivity of CF composites, which is crucial for enhancing their performance in high‐end engineering applications, such as aerospace, automotive, and marine industries. Highlights Modification of CF composites by GO‐M sheets significantly improved toughness and strength. GO‐L sheets formed an effective heat transfer channel with the highest thermal conductivity. The study emphasized the critical role of selecting the appropriate GO sheet size to optimize the mechanical and thermal properties of CF composites.

Mechanical Properties and Failure Mechanism of Spreading Carbon Fiber Reinforced Different Lateral Dimension of Graphene Oxide Modified Epoxy Composites

Self-assembled Complexes of Graphene Oxide and Oxidized Vapor-Grown Carbon Fibers for Simultaneously Enhancing the Strength and Toughness of Epoxy and Multi-Scale Carbon Fiber/epoxy Composites

Superior interlayer and compression properties of CFRPs due to inter-fiber "bridges" built by functionalized micro-nano scale graphene oxide synergistically

Influence of graphene oxide content on the morphology and properties of carbon fiber/epoxy composites

Effect of different lateral dimension graphene oxide sheets on the interface of carbon fiber reinforced polymer composites

Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide

The effect of graphene oxide modified short carbon fiber on the interlaminar shear strength of carbon fiber fabric/epoxy composites

Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites

Grafting of size-controlled graphene oxide sheets onto carbon fiber for reinforcement of carbon fiber/epoxy composite interfacial strength

Synergistic effect of functionalized graphene oxide and carbon nanotube hybrids on mechanical properties of epoxy composites

Effect of graphene oxide on tensile and flexural properties of carbon/glass hybrid fiber‐reinforced polymer composite

Mechanical Behavior and Microstructure of Graphene Oxide Electrodeposited Carbon Fiber Reinforced Cement-Based Materials

A novel π bridging method to graft graphene oxide onto carbon fiber for interfacial enhancement of epoxy composites

Graphene Oxide/Polymer-Based Multi-scale Reinforcement Structures for Enhanced Interfacial Properties of Carbon Fiber Composites

Improved interfacial shear strength of CF/PA6 and CF/epoxy composites by grafting graphene oxide onto carbon fiber surface with hyperbranched polyglycerol

Multi-factor Analysis of the Effects of Graphene Oxide Nanoplatelets on Self-Healing Polymer Composites Based on Micromechanical FE Simulation

Impact of graphene oxide lateral sizes on the mechanical and thermal properties of carbon fiber composites

Static and Dynamic Mechanical Properties of Graphene Oxide-Incorporated Woven Carbon Fiber/Epoxy Composite

The effect of graphene oxide on thermal, electrical, and mechanical properties of carbon/epoxy composites: Towards multifunctional composite material

Enhanced cryogenic mechanical properties of carbon fiber reinforced epoxy composites by introducing graphene oxide

Investigation into effect of the graphene oxide addition on the mechanical properties of the fiber metal laminates