Abstract:The concept of pure optical photoacoustic microscopy(POPAM) was proposed based on optical rastering of a focused excitation beam and optically sensing the photoacoustic signal using a microring resonator fabricated by a nanoimprinting technique. After some refinedment of in the resonator structure and mold fabrication, an ultrahigh Q factor of 3.0x10(5) was achieved which provided high sensitivity with a noise equivalent detectable pressure(NEDP) value of 29Pa. This NEDP is much lower than the hundreds of Pascals achieved with existing optical resonant structures such as etalons, fiber gratings and dielectric multilayer interference filters available for acoustic measurement. The featured high sensitivity allowed the microring resonator to detect the weak photoacoustic signals from micro-or submicroscale objects. The inherent superbroad bandwidth of the optical microring resonator combined with an optically focused scanning beam provided POPAM of high resolution in the axial as well as both lateral directions while the axial resolution of conventional photoacoustic microscopy (PAM) suffers from the limited bandwidth of PZT detectors. Furthermore, the broadband microring resonator showed similar sensitivity to that of our most sensitive PZT detector. The current POPAM system provides a lateral resolution of 5 mu m and an axial resolution of 8 mu m, comparable to that achieved by optical microscopy while presenting the unique contrast of optical absorption and functional information complementing other optical modalities. The 3D structure of microvasculature, including capillary networks, and even individual red blood cells have been discerned successfully in the proof-of-concept experiments on mouse bladders ex vivo and mouse ears in vivo. The potential of approximately GHz bandwidth of the microring resonator also might allow much higher resolution than shown here in microscopy of optical absorption and acoustic propagation properties at depths in unfrozen tissue specimens or thicker tissue sections not now imageable with current optical or acoustic microscopes of comparable resolution.

High-Frequency 3D Photoacoustic Computed Tomography Using an Optical Microring Resonator

3d Photoacoustic Tomography System Based On Full-View Illumination And Ultrasound Detection

High-speed three-dimensional photoacoustic computed tomography for preclinical research and clinical translation

3d High Resolution Photoacoustic Imaging Based On Pure Optical Photoacoustic Microscopy With Microring Resonator

Small-Animal Whole-Body Imaging Using A Photoacoustic Full-Ring Array System

Photoacoustic Computed Tomography by Using a Multi-Angle Scanning Fiber-Laser Ultrasound Sensor

Single-shot 3D photoacoustic computed tomography with a densely packed array for transcranial functional imaging

Wideband Photoacoustic Tomography Using Polymer Microring Resonators

3d High-Resolution Pure Optical Photoacoustic Microscopy

Rapid and Noncontact Photoacoustic Tomography Imaging System Using an Interferometer with High-Speed Phase Modulation Technique.

Ultrabroad Bandwidth and Highly Sensitive Optical Ultrasonic Detector for Photoacoustic Imaging

Dual-foci Detection in Photoacoustic Computed Tomography with Coplanar Light Illumination and Acoustic Detection: a Phantom Study

Deep Tissue Photoacoustic Computed Tomography with A Fast and Compact Laser System

Focus-tunable Fiber-Laser Ultrasound Sensor for High-Resolution Linear-Scanning Photoacoustic Computed Tomography

High-Sensitivity Optical-Resolution Photoacoustic Microscopy with an Optical-Acoustic Combiner Based on an Off-Axis Parabolic Acoustic Mirror

High-speed, sparse-sampling three-dimensional photoacoustic computed tomography in vivo based on principal component analysis.

In Vivo Reflection-Mode Photoacoustic Microscopy Enhanced by Plasmonic Sensing with an Acoustic Cavity

High-speed Functional Photoacoustic Microscopy Using a Water-Immersible Two-Axis Torsion-Bending Scanner

On the importance of low-frequency signals in functional and molecular photoacoustic computed tomography

Complete-noncontact Photoacoustic Microscopy by Detection of Initial Pressures Using a 3×3 Coupler-Based Fiber-Optic Interferometer.

SNR-enhanced Fiber-Laser Ultrasound Sensors for Photoacoustic Tomography