Abstract:In order to better describe the thermal behavior of ground heat exchangers（GHE）in a layer stratum，a general analytical model is developed and the corresponding analytical solution is obtained using Green’s function method；The Green’s function，which is the temperature response of single instantaneous ring source，is obtained using the separation of variables technique. The proposed model considers layer stratum and anisotropic properties，and it is applicable for both borehole heat exchanger and pile foundation heat exchanger which are two types of GHEs mostly used in engineering application. Computational examples of the model in a double-layered stratum are presented. The results show that it is necessary to adopt the layered model when long-term temperature response of a GHE is considered，since the error of neglecting the inhomogeneous feature increases with increasing time. There is a critical zone，and the temperature response in this zone can be described by a homogenous model using thermal properties of the corresponding layer . The thermal conductivity of each layer has great effect on the temperature response of a GHE. The steady temperature of soil decreases markedly as the ratio of thermal conductivity between soil layers increases. The ratio of GHE length to diameter also affect the thermal behavior of a GHE，and the steady temperature increases with increasing ratio of GHE length to diameter. The effect of GHE length to diameter on the steady temperature is more pronounced when the thermal conductivity ratio is smaller.

Heat Transfer Analysis of a Borehole Heat Exchanger Array in a Layered Subsurface

Thermo-mechanical Performance of Layered Transversely Isotropic Media Around a Cylindrical/tubular Heat Source

Cylindrical surface model of ground source heat pump considering soil stratification

Thermo-Mechanical Coupling Response of A Layered Isotropic Medium Around A Cylindrical Heat Source

Transient Thermal Response of a Multilayered Geomaterial Subjected to a Heat Source

A Simplified Method for Evaluating Temperature Effect on the Behavior of Layered Soil with a Time-Varying Cylindrical Heat Source

Multilayer Quasi-Three-dimensional Model for the Heat Transfer Inside the Borehole Wall of a Vertical Ground Heat Exchanger

Numerical Simulation and Analysis on the Heat Transfer of the Vertical Ground Heat Exchanger in Hydrous Soil

ANALYTICAL MODE AND ANALYSIS OF HEAT TRANSFER OF GROUND HEAT EXCHANGERS IN LAYERED STRATUM

Performance Evaluation Of Borehole Heat Exchanger In Multilayered Subsurface

An analytical model for heat transfer outside a single borehole heat exchanger considering convection at ground surface and advection of vertical water flow

Numerical investigation of vertical borehole heat exchanger heat transfer under coupled conditions of groundwater seepage and layered subsurface

Heat transfer analysis of a multi-borehole heat exchanger of ground source heat pump systems

Study the Performance of Borehole Heat Exchanger Considering Layered Subsurface Based on Field Investigations

Semi-analytical and numerical modeling of U-bend deep borehole heat exchanger

A Simplified Semi-Numerical Model to Simulate a U-pipe Ground Heat Exchanger

A Unified Model and Analytical Solution for Borehole and Pile Ground Heat Exchangers

Analytical model of heat transfer of U-shaped borehole heat exchanger under convolution theory and its optimal heat extraction analysis

Analysis on heat transfer performance of coaxial borehole heat exchanger in a layered subsurface with groundwater

Estimation Method of Layered Ground Thermal Conductivity for U-tube BHE Based on the Quasi-3D Model

Prediction and Parametric Analysis of 3D Borehole and Total Internal Thermal Resistance of Single U-tube Borehole Heat Exchanger for Ground Source Heat Pumps