Effects of LiF additive on crystal structures, lattice vibrational characteristics and dielectric properties of CaWO4 microwave dielectric ceramics for LTCC applications
Zhongfen An,Jiqing Lv,Xiangyu Wang,Yue Xu,Lingcui Zhang,Feng Shi,Hai Guo,Di Zhou,Bing Liu,Kaixin Song
DOI: https://doi.org/10.1016/j.ceramint.2022.06.259
IF: 5.532
2022-10-01
Ceramics International
Abstract:In this paper, CaWO4-x wt.% LiF (x = 0.5–3.0) microwave dielectric ceramics are prepared by conventional solid-state reaction at 850 °C. All the X-ray diffraction peaks are attributed to CaWO4, combined with the results of X-ray photoelectron spectroscopy and scanning electron microscope. They indicate that LiF forms liquid phase at high temperature, exists in amorphous phase, and the CaWO4-x wt.% LiF samples belong to the composite ceramics. With the increase of the LiF content, the liquid phase fills the pores of the ceramics and increases the compactness. Therefore, the quality factor increases from 59,055 GHz (x = 0.5) to 77,855 GHz (x = 3.0), and the dielectric constant decreases from 9.26 (x = 0.5) to 8.41 (x = 3.0). The lattice vibration characteristics of the CaWO4-x wt.% LiF samples are studied by Raman and infrared spectroscopy. The external modes associated with the vibration of the Ca–O bonds have the greatest influence on the dielectric response, as shown by the fitting results based on the four-parameter semi-quantum (FPSQ) model. In addition, the simulated intrinsic properties and measured values are in general agreement. When the x value increases, the dielectric constant decreases with the decrease of the bond length. The quality factor has a negative correlation with the FWHM value of the B g mode and a positive correlation with the packing fraction. Finally, the CaWO4-3 wt.% LiF sample has good compatibility with the silver powders at 850 °C, and high application value in the LTCC field.
materials science, ceramics