Abstract:Cell counting and sorting is a vital step in the purification process within the area of biomedical research. It has been widely reported and accepted that the use of hydrodynamic focusing in conjunction with the application of a dielectrophoretic (DEP) force allows efficient separation of biological entities such as platelets from red blood cell (RBC) samples due to their size difference. This paper presents computational results of a multiphysics simulation modelling study on evaluating continuous separation of RBCs and platelets in a microfluidic device design with saw-tooth profile electrodes via DEP. The theoretical cell particle trajectory, particle cell counting, and particle separation distance study results reported in this work were predicted using COMSOL v6.0 Multiphysics simulation software. To validate the numerical model used in this work for the reported device design, we first developed a simple y-channel microfluidic device with square "in fluid" electrodes similar to the design reported previously in other works. We then compared the obtained simulation results for the simple y-channel device with the square in fluid electrodes to the reported experimental work done on this simple design which resulted in 98% agreement. The design reported in this work is an improvement over existing designs in that it can perform rapid separation of RBCs (estimated 99% purification) and platelets in a total time of 6-7 s at a minimum voltage setting of 1 V and at a minimum frequency of 1 Hz. The threshold for efficient separation of cells ends at 1000 kHz for a 1 V setting. The saw-tooth electrode profile appears to be an improvement over existing designs in that the sharp corners reduced the required horizontal distance needed for separation to occur and contributed to a non-uniform DEP electric field. The results of this simulation study further suggest that this DEP separation technique may potentially be applied to improve the efficiency of separation processes of biological sample scenarios and simultaneously increase the accuracy of diagnostic processes via cell counting and sorting.

SEPARATION OF BIOLOGICAL PARTICLES FROM SHIP BALLAST WATER USING A NOVEL CHIP BASED ON DIELECTROPHORETIC MICRO-FLUIDIC TECHNOLOGY

Separation of Nanoparticles Via Surfing on Chemical Wavefronts

Electrokinetic detection and separation of living algae in a microfluidic chip: implication for ship’s ballast water analysis

Optically induced dielectrophoresis for continuous separation and purification of C. vulgaris and H. pluvialis

DC-Dielectrophoretic Manipulation and Isolation of Microplastic Particle-Treated Microalgae Cells in Asymmetric-Orifice-Based Microfluidic Chip

Separation of microalgae from bacterial contaminants using spiral microchannel in the presence of a chemoattractant

A stepwise multi-stage continuous dielectrophoresis separation microfluidic chip with microfilter structures

Dielectrophoretic Assembly and Separation of Particles and Cells in Continuous Flow

Dielectrophoresis Separation of Colon Cancer Cell

Simple, Cost-Effective, and Continuous 3D Dielectrophoretic Microchip for Concentration and Separation of Bioparticles

Screen-printed microfluidic dielectrophoresis chip for cell separation

A Self-Cleaning Micro-Fluidic Chip Biospired by the Filtering System of Manta Rays

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Continuous On-Chip Cell Separation Based on Conductivity-Induced Dielectrophoresis with 3D Self-Assembled Ionic Liquid Electrodes

Continuous Particle Separation Driven by 3D Ag-PDMS Electrodes with Dielectric Electrophoretic Force Coupled with Inertia Force

Dielectrophoresis Separation of Platelets Using a Novel Zigzag Microchannel

High-Resolution Charge-Based Electrokinetic Separation of Almost Identical Microparticles

A Complete Design Flow of Dielectrophoretic Chip

Continuous Flow Separation of Red Blood Cells and Platelets in a Y-Microfluidic Channel Device with Saw-Tooth Profile Electrodes via Low Voltage Dielectrophoresis

Efficient Microfluidic Particle Separation Using Inertial Pre-Focusing and Pre-Separation Structures Without Sheath Flow

Design and Optimization of a Microfluidic Cell Separator Based on Dielectrophoresis