Abstract:Acidic wastewater laden with ammonia nitrogen (NH4+-N) is a widely produced in various industries, such as printed circuit board manufacturing. Due to the low pH level, traditional treatment methods like biological nitrification and denitrification, physical separation, and breakpoint chlorination are not practical for its treatment. Electrochemical methods have emerged as a promising approach for NH4+-N-containing wastewater treatment due to their wide range of pH adaptability, low reagent dosage, high efficiency, and eco-friendliness. Electrode material is a critical factor in determining the performance of electrochemical ammonia treatment, and it is essential to systematically investigate the effects of anode materials on NH4+-N removal performance under different acidic water conditions. In this study, we used three commercial electrodes (Ti/RuO2-IrO2, Ti/PbO2, and Ti/SnO2-Sb) in the electro-oxidation (EO) and coupled UV/EO systems and compared the performance of electrochemical ammonia removal at acidic pH values. The mechanism of UV-assisted NH4+-N removal in acidic wastewater was elucidated by investigating the differences between various electrodes and systems. The key findings can be summarized as follows. (1) The chlorine evolution capacity was identified as a critical factor influencing the EO of ammonia in acidic wastewater. Notably, the Ti/SnO2-Sb anode exhibited a significantly higher cumulative free chlorine of 145.0 mg·L−1 at pH = 2, which was 2.13 and 1.95 times greater than the corresponding values observed with the Ti/RuO2-IrO2 and Ti/PbO2 anodes, respectively. Consequently, the NH4+-N removal rate using the Ti/SnO2-Sb anode was 2.79 times and 1.90 times faster compared to the Ti/RuO2-IrO2 and Ti/PbO2 anodes, respectively. (2) The incorporation of UV irradiation accelerated the removal of NH4+-N in acidic wastewater. The coupled UV/EO system exhibited a 1.98 to 2.67 times higher NH4+-N removal rate compared to the EO system alone. Results from scavenging experiments and electron paramagnetic resonance tests demonstrated the significant role of chlorine radical species in NH4+-N removal within the coupled UV/EO system. (3) The coupled UV/EO systems using the three different anodes were found to be effective in removing NH4+-N in two actual acidic wastewaters generated from metal washing and ammonia-absorption-tower cleaning factories. (4) Although the Ti/SnO2-Sb anode exhibited the best performance in the single-stage oxidation of NH4+-N, it was the least stable among the three evaluated anode systems. Comparing the anode consumption cost for removing 1 kg of NH4+-N across different types of anodes, it was observed that Ti/PbO2 was significantly more cost-effective (with a cost reduction ranging from 10.24 to 271.17 times) compared to the other two anodes.

Enhanced Removal of Organics and Ammonia by a Composite Anode in the Electrochemically Assisted Ozonation (EAO) Processes with Reduced Sludge and Alleviated Passivation

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Coupling Ammonia Nitrogen Adsorption and Regeneration Unit with a High-Load Anoxic/aerobic Process to Achieve Rapid and Efficient Pollutants Removal for Wastewater Treatment

Novel Use of the Electrocatalytic Oxidation Process with Fe-DSA Dual Anode Configuration for Leachate Treatment: Significance of in Situ Ferrate Generation

Removal of chemical oxygen demand and ammonia nitrogen from lead smelting wastewater with high salts content using electrochemical oxidation combined with coagulation–flocculation treatment

High-efficiency Refractory Organic Pollutants Removal Boosted by Combining Heterogeneous Electro-Fenton with Electrochemical Anodic Oxidation over a Broad Ph Range

Cao2 Activation by Electrochemically Generated Fe2+ for Improving Sludge Dewatering at Neutral Ph: Influence of Oxalic Acid Addition

New Magnetically Assembled Electrode Consisting of Magnetic Activated Carbon Particles and Ti/Sb-SnO2 for a More Flexible and Cost-Effective Electrochemical Oxidation Wastewater Treatment

Iron-electrolysis assisted anammox/denitrification system for intensified nitrate removal and phosphorus recovery in low-strength wastewater treatment

New architecture of a variable anode for full-time efficient electrochemical oxidation of organic wastewater with variable Cl<SUP>-</SUP> concentration

Unveiling the Transformation of Organics in Leachate During the Composite Anode-Supported Electro-Hybrid Ozonation-Coagulation (CA-E-HOC) Treatment: Significance of Synergy among Chlorine, Coagulant, and Ozone

CaO 2 activation by electrochemically generated Fe 2+ for improving sludge dewatering at neutral pH: Influence of oxalic acid addition

Electrochemical Oxidation of Dual Electrodes with Iron Promoting Used for the Treatment of Wastewater from Acrylonitrile Production

FeOCl Nanoparticles Loaded onto Oxygen-Enriched Carbon Nanotubes and Nickel-Foam-Based Cathodes for the Electro-Fenton Degradation of Pollutants

Effects of anode materials on ammonium removal performance using the electro-oxidation (EO) and the coupled UV/EO systems for acidic wastewater treatment

Oxalic Acid Modification Enables High Efficiency and Proton Conductive of Fe-base Amorphous Toward Acid Orange II in Wastewater Removal

In situ electro-generated Ni(OH)2 synergistic with Cu cathode to promote direct ammonia oxidation to nitrogen

Novel Self-Sustained Flow-Through Electrochemical Advanced Oxidation Processes Using Nano-Fe0 Confined B, N Co-Doped Carbon Nanotubes/Graphite Felt Cathode: Higher Mineralization Efficiency under Wider Ph

A Modular Functionalized Anode for Efficient Electrochemical Oxidation of Wastewater: Inseparable Synergy Between OER Anode and Its Magnetic Auxiliary Electrodes.

Simultaneous Enhancement of Sludge Dewaterability and Removal of Sludge-Borne Heavy Metals Through a Novel Oxidative Leaching Induced by Nano-Cao2.

Removal of chemical oxygen demand and ammonia nitrogen from high salinity tungsten smelting wastewater by one-step electrochemical oxidation: From bench-scale test, pilot-scale test, to industrial test