Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

Snap-through Load Improvement of Bistable Composite Shell with Initial Curvature by an Adjustive Angle

Analytical Solution for Externally Bonded Joints Considering Snap-Back

Design and Manufacturing of Highly Tailorable Pre-Bent Bi-Stable Composites

Design and Optimization of Variable Stiffness Composite Cylinders with the Consideration of Manufacturing Interaction

Symmetric Snap-Through and Equal Potential Energy Load of Non-Uniform Shallow Arch under a Concentrated Load Considering Imperfection Effect

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

A New Semi-Analytical Method for Nonlinear Stability Analysis of Stiffened Laminated Composite Doubly-Curved Shallow Shells

Static and Dynamic Symmetric Snap-Through of Non-Uniform Shallow Arch under a Pair of End Moments Considering Critical Slowing-Down Effect

Mechanical behavior of composite bistable shell structure and surrogate-based optimal design

Dynamics and Control of Adaptive Shells with Curvature Transformations

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Experimental validation study on snap through and coiling up of deployable composite shells

Large deformation analysis of functionally graded revolutionary shallow thin shells with bi-modular effect: Snap-through buckling under different boundary constraints

Post-buckling optimization of bending-induced variable stiffness composite cylinders considering worst geometric imperfections

Snap-through eversion of axisymmetric shells under contact indentation

Bistable Characteristics of Unsymmetric Cross-ply Composite Laminates Considering Different Boundary Shapes

Geometrically nonlinear bending of stiffened composite skewed cylindrical shells under transverse pressure

Nonlinear Stability Analysis of Rotationally-Restrained Imperfect Doubly-Curved Composite Shallow Shells

Shape Optimization of a Composite Cruciform Specimen under Biaxial Loading Condition

Prediction of Critical Center Load for Bi-Stable Laminates