Abstract:High-energy-density Li–S batteries (LSBs) are considered as a promising next-generation energy-storage system. However, the sluggish redox kinetics and severe polysulfide shuttle effect in elemental sulfur cathodes, along with uncontrollable dendrite propagation in lithium metal anodes, inevitably depress the electrochemical performance of LSBs and impede their practical implementation. Motivated by a unique hierarchical geometry, specific chemical affinity, and nitrogen-enriched collagen component of natural skin fibers (SFs), here we proposed an effective structural engineering strategy for crafting an SF-derived superhierarchical N-doped porous carbon framework in situ implanted with nickel/graphitic carbon nanocages as a dual-role host to simultaneously address the challenges faced on the sulfur cathode and lithium anode in LSBs. The experimental results and theoretical calculation disclose that the implanted Ni nanoparticles and highly graphitic sp<sup>2</sup> carbon nanocages together with doped N heteroatoms not only provide a synergetic trapping-catalytic-conversion effect for regulating soluble polysulfides with promoted redox kinetics in the cathode at both room and elevated (55 °C) temperatures but also yield Ni-enhanced lithiophilic N-heteroatom active sites in the host framework to control Li deposition and suppress Li dendrite growth in anodes. Combining the cathodic and anodic improvements further achieves a superb rate and cycling performance in full LSB cells with stable Coulombic efficiency, showing great potential in developing reliable LSBs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10047?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10047</a>.Additional material characterization (XRD TGA, SEM, and TEM), DFT calculation models, visualized PS adsorption test, electrochemical characterization, and the table used for performance comparison; raw hides; digital photograph of SFs; XPS survey spectra of SFs (Figure S1); FESEM images of original SFs, and carbonized SFs by directly calcining at 800 °C for 4 h in an argon atmosphere (Figure S2); TEM and HRTEM images and the elemental mapping results of ZrO<sub>2</sub>@CFs (Figure S3); atomic and mass ratio of carbon, nitrogen, and oxygen elements for SFs from the XPS test (Table S1); comparison of the specific surface area and pore volume of N-PCFs calcinated at different temperatures (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10047/suppl_file/am0c10047_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Co-construction of advanced sulfur host by implanting titanium carbide into Aspergillus niger spore carbon

Implanting Niobium Carbide into Trichoderma Spore Carbon: a New Advanced Host for Sulfur Cathodes

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Hyphae Carbon Coupled with Gel Composite Assembly for Construction of Advanced Carbon/Sulfur Cathodes for Lithium–Sulfur Batteries

Spore Carbon from Aspergillus Oryzae for Advanced Electrochemical Energy Storage.

Confining Sulfur in N-Doped Porous Carbon Microspheres Derived from Microalgaes for Advanced Lithium-Sulfur Batteries.

Sulfur Cathode Integrated with Multileveled Carbon Nanoflake-Nanosphere Networks for High-Performance Lithium-Sulfur Batteries

Conductive Carbon Network inside a Sulfur-Impregnated Carbon Sponge: A Bioinspired High-Performance Cathode for Li-S Battery

Porous Carbon Architecture Assembled by Cross-Linked Carbon Leaves with Implanted Atomic Cobalt for High-Performance Li–S Batteries

Implanting Single Zn Atoms Coupled with Metallic Co Nanoparticles into Porous Carbon Nanosheets Grafted with Carbon Nanotubes for High‐Performance Lithium‐Sulfur Batteries

Facile Preparation of Porous TiN-C Microspheres As an Efficient Sulfur Host for High Performance Lithium-Sulfur Battery

A 3D Conductive Network of Porous Carbon Nanoparticles Interconnected with Carbon Nanotubes As the Sulfur Host for Long Cycle Life Lithium-Sulfur Batteries.

Bio-assisted engineering of hierarchical porous carbon nanofiber host in-situ embedded with iron carbide nanocatalysts toward high-performance Li–S batteries

Bi-structural fibers of carbon nanotube coated with nitrogen/oxygen dual-doped porous carbon layer as superior sulfur host for lithium-sulfur batteries

Built‐in Carbon Nanotube Network Inside a Biomass‐Derived Hierarchically Porous Carbon to Enhance the Performance of the Sulfur Cathode in a Li‐S Battery

Construction of all-carbon micro/nanoscale interconnected sulfur host for high-rate and ultra-stable lithium-sulfur batteries: Role of oxygen-containing functional groups

Superhierarchical Conductive Framework Implanted with Nickel/Graphitic Carbon Nanocages as Sulfur/Lithium Metal Dual-Role Hosts for Li–S Batteries

Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge

Genetic engineering of porous sulfur species with molecular target prevents host passivation in lithium sulfur batteries