Abstract:Publication date: 22 July 2022 Source: Key Engineering Materials Vol. 926 Author(s): Xu He, Jun Ma, Sigmund Arntsønn Tronvoll, Togeir Welo Bent tubes and profiles are widely used in many industries such as automotive, aerospace and shipbuilding. In bending of tubes and profiles, springback is normally regarded as a challenge, affecting the dimensional accuracy of products. Springback control significantly determines the production route of products, including logistics. At present, effective in-situ measurement methods are lacking. This makes it difficult to realize in-process, closed-loop control of springback for improving product quality and productivity, while putting improved flexibility on the production route. In this research, an in-process measurement technique for monitoring springback in rotary draw bending was developed. A device with a laser transmitter and receiver was installed on a bending machine to detect displacement changes of the part after being released from the tool. The displacement information was collected by a controller that shows the measured displacement. A series of tube bending experiments together with the developed in-line laser sensor measurement and conventional off-line manual measurements were carried out. The result shows that the in-line laser sensor method provides a good capability for springback measurement. Since the laser measurement method is done with no need to remove the workpiece from the tooling system, it facilitates developing an in-process compensation strategy to control springback.

Modeling of Adjustable Bending Pipe to Compensate for Pipe Assembly Production Errors

Design and Finite Element Analysis of High Efficiency and High Precision Centering Device for Ship Pipe Welding

Modeling of laser adjustment for large diameter tubes using robotic kinematic theories

A Study on the Optimization of Joint Mandrel Shape for Manufacturing Long Type Elbow Using Push Bending Process

3D Pipe Forming of a New Bending Machine with a 3PUU–3RPS Hybrid Mechanism

Simulation and Control Models of Laser Bending Angle of Sheet Metals

Intelligent Control System of Internal Expansion over Bending and Calibration (IEOBC) Process for Large Pipe Ends

Assembly Error Calculation with Consideration of Part Deformation

Optimization Method for Spatial Route Adjustment of Multi-Bends Pipes Considering Assembly Demands

Numerical simulation of bending deformation induced by multi-seam welding of a steel-pipe structure

Simulate and Control Models of Laser Bending Process of Sheet Metals

Bending Deformation Control in a Laser-Welded Long Straight Structure by Elastic Pre-Bending Technique

Straightness Measuring and Finite Element Analysis of the Drilling Pipe Straightening Based on the LPD

Product Evaluation In Elliptical Helical Pipe Bending

Deformation mechanism analysis of three-roller continuous and synchronous calibration process of straightness and roundness for LSAW pipes

Fuzzy Logic Model for Bending Angle in Laser Forming

Adaptive Control for Laser Welding with Filler Wire of Marine High Strength Steel with Tight Butt Joints for Large Structures

In-Process Monitoring of Springback in Industrial Bending Using a Laser Sensor-Based Method

Numerical Modeling and Mechanism Analysis of Hybrid Heating and Shock Process for Laser-Assisted Laser Peen Forming

FE Modeling of Warm Flanging Process of Large T-pipe from Thick-Wall Cylinder