Abstract:A scalable silicon/carbon anode is developed using spray drying and chemical vapor deposition to create a microscale composite rich in graphene edges, along with a LiF‐enriched solid electrolyte interface on the vertical graphene layer. The s‐Gr/n‐Si/VGs demonstrate significant capacity and cycling performance at both coin‐cell and 5.0 Ah pouch‐cell levels, making them suitable for high‐energy‐density lithium‐ion batteries. Silicon (Si) anodes offer excellent lithium storage capacity for lithium‐ion batteries but face practical limitations due to significant volume expansion and low intrinsic electrical conductivity. These issues lead to side reactions that consume the electrolyte and impede ion‐electron transport, resulting in low areal loading (<2 mg cm−2) and restricted energy density. To address this, a scalable method is developed using spray drying of commercial graphite flakes (s‐Gr) and nanosilicon particles (n‐Si), followed by chemical vapor deposition to create microscale Si/C anodes (s‐Gr/n‐Si/VGs). Thin vertical graphene nanosheets (VGs) are grown on the surfaces and within the internal pores, forming a robust, micron‐sized Si/C spherical composite material. The VGs construct the conductive network, allowing the electrodes to operate at high areal loadings without pulverization and promoting LiF‐enriched solid electrolyte interphase for improved cycling stability. The s‐Gr/n‐Si/VGs maintain a capacity of 641.9 mAh g−1 after 1000 cycles at 11.0 mg cm−2, retaining 95.9% capacity. In pouch cells with NCM811 cathodes, the 5.0 Ah‐level cells achieved 80.0% capacity retention after 510 cycles at 1.0 C. This research provides a feasible pathway for manufacturing high‐performance, low‐cost, and scalable Si/C anodes suitable for high‐energy‐density lithium‐ion batteries.

Vertical Graphene Nanosheets on Porous Microsilicon Particles for Anodes of Lithium-Ion Batteries

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Growth of Vertical Graphene Sheets on Silicon Nanoparticles Well‐Dispersed on Graphite Particles for High‐Performance Lithium‐Ion Battery Anode

Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Vertical Graphene Growth on SiO Microparticles for Stable Lithium Ion Battery Anodes

Growth of Flexible and Porous Surface Layers of Vertical Graphene Sheets for Accommodating Huge Volume Change of Silicon in Lithium-Ion Battery Anodes

Vertical Graphene Sheet-Encapsulated Silicon Nanoparticles for Anodes of Polymer-Based All-Solid-State Batteries

Enhanced electrochemical performance promoted by monolayer graphene and void space in silicon composite anode materials

In Situ Catalytic Growth 3D Multi-Layers Graphene Sheets Coated Nano-Silicon Anode for High Performance Lithium-Ion Batteries

Graphene-bonded and -Encapsulated Si Nanoparticles for Lithium Ion Battery Anodes.

Free-Standing Graphene-Encapsulated Silicon Nanoparticle Aerogel As an Anode for Lithium Ion Batteries

Cost-Effective Milled Silicon and Exfoliated Graphene Anode for High-Performance Li-Ion Batteries

High-Performance Porous Silicon/Nanosilver Anodes from Industrial Low-Grade Silicon for Lithium-Ion Batteries.

Constructing LiF‐Enriched Solid Electrolyte Interface on Graphene Arrays with Abundant Edges on Microscale Si‐C Anodes Toward High‐Energy Lithium‐Ion Batteries

Two-dimensional Porous Silicon Nanosheets As Anode Materials for High Performance Lithium-Ion Batteries.

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Silicon is Embedded in Graphene Layers Through High-Energy Ball Milling as the Anode Material for Lithium-Ion Batteries

Improved Anode Materials for Lithium-Ion Batteries Comprise Non-Covalently Bonded Graphene and Silicon Nanoparticles