Abstract:Current lithium-ion batteries consist of a graphite anode and a metal oxide cathode. Due to their relatively high energy density and rechargeability, they have enabled various applications over the past few decades. However, significant improvements to battery cost, performance, and safety for applications such as vehicle electrification require a shift to next-generation materials, such as silicon as an anode which offers higher capacity, as well as solid-state electrolytes (SSEs) which are non-flammable. Both of these technologies currently suffer challenges which have prevented their widespread adoption. Silicon suffers low conductivity, and large volume change on each cycle, subsequently causing loss in electrical contact and the formation of an unstable solid electrolyte interface (SEI) each cycle. This project aims to solve these challenges by wrapping silicon nanoparticles and a sacrificial spacing material with crumpled graphene sheets using a scalable, spray drying method, and coupling it with a solid electrolyte. The graphene shell provides electrical contact with the silicon and space for its expansion during lithiation. The solid electrolyte provides a safer alternative to liquid electrolytes, and further reduces the SEI formation which, with a liquid electrolyte, can leak into such crumpled structures. In this work we will present our initial results concerning how the spacing material affects the structure and how the overall structure can be modified by spray drying parameters to determine optimal conditions for capacity and cycle-life using, first, at typical, organic carbonate-based electrolyte. We will explore different spacing material candidates such as chitosan which, upon heat treatment of the sample, would not only provide space for the expansion of silicon, but the residual nitrogen-doped carbon would also act as a conductive filler inside the crumpled structure. Furthermore, we will investigate various binder systems and their impact on cycle-stability including polyvinylidene fluoride (PVDF), polyacrylic acid (PAA), sodium alginate (SA), and cross-linked SA. Based on preliminary, both PAA and SA are shown to have improved performance compared to PVDF as well as higher cycle life, however, SA forms smoother, thinner electrode films. Cross-linked SA is also shown to increase the cycling life and decrease the capacity loss per cycle. We then explore powder mixing and solution infiltration methods to introduce high conductivity SSEs and their performance when coupled to the graphene-wrapped silicon anode structures.

Vertical Graphene Sheet-Encapsulated Silicon Nanoparticles for Anodes of Polymer-Based All-Solid-State Batteries

Pomegranate-like silicon-based anodes self-assembled by hollow-structured Si/void@C nanoparticles for Li-ion batteries with high performances

Vertical Graphene Growth on SiO Microparticles for Stable Lithium Ion Battery Anodes

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Growth of Vertical Graphene Sheets on Silicon Nanoparticles Well‐Dispersed on Graphite Particles for High‐Performance Lithium‐Ion Battery Anode

Graphene-Wrapped Silicon Nanoparticles for All-Solid-State Lithium-Ion Batteries

3D binder-free nanoarchitecture design of porous silicon/graphene fibers for ultrastable lithium storage

Free-Standing Graphene-Encapsulated Silicon Nanoparticle Aerogel As an Anode for Lithium Ion Batteries

Constructing LiF‐Enriched Solid Electrolyte Interface on Graphene Arrays with Abundant Edges on Microscale Si‐C Anodes Toward High‐Energy Lithium‐Ion Batteries

Stable Li-ion Battery Anodes by In-Situ Polymerization of Conducting Hydrogel to Conformally Coat Silicon Nanoparticles

Engineering Polymer-Assisted Self-Assembly Process for High-Capacity and Cycle-Stable Si-on-Graphite Anode of Li-Ion Batteries

Adaptable silicon-carbon nanocables sandwiched between reduced graphene oxide sheets as lithium ion battery anodes

Manipulating charge-transfer kinetics and flow-domain LiF-rich interphase to enable high-performance microsized silicon-silver-carbon composite anode for solid-state batteries

Designing Compatible Ceramic/Polymer Composite Solid-State Electrolyte for Stable Silicon Nanosheet Anodes

Cost-Effective Milled Silicon and Exfoliated Graphene Anode for High-Performance Li-Ion Batteries

Silicon Layer on Polymer Electrolyte as a Dendrite Stopper for Stable Lithium Metal Batteries

Hierarchically Structured Conductive Polymer Binders with Silver Nanowires for High-Performance Silicon Anodes in Lithium-Ion Batteries

Scalable Synthesis of Si Nanosheets as Stable Anodes for Practical Lithium-Ion Batteries

Two-dimensional Porous Silicon Nanosheets As Anode Materials for High Performance Lithium-Ion Batteries.

In situ dispensing glue to prepare flexible Si-based anode for lithium-ion batteries

A ′′Reinforced Concrete′′ Structure of Silicon Embedded into an In Situ Grown Carbon Nanotube Scaffold as a High-Performance Anode for Sulfide-Based All-Solid-State Batteries