Abstract:In this paper, a dual-band terahertz metamaterial sensor based on aluminum and silicon is proposed and simulated. The aluminum surface, which is deposited on a silicon substrate, is made of a C-shaped frame resonator, a rectangular beam, and a cross. The device is insensitive to the change of incident angle in the range of 0°-30°, which shows the great transmission stability of the sensor. By examining the resonance frequency shift, it is shown that 98.3 and 237.5 GHz/RIU refractive index sensitivity can be obtained near 1.76 and 2.404 THz transmission dips of the proposed structure, respectively. The two dips can be used to sense analytes in different refractive index ranges, respectively. For Dip 1 at 1.76 THz, the range is 1.0-1.6. For Dip 2 at 2.404 THz, the range is 1.6-2.0. Different from traditional multi-band metamaterial sensors, two dips generated by the proposed device can measure continuous and non-multiplexed refractive index ranges, respectively. Because the resonance frequencies of matters are different, such a characteristic enables the device to measure different types of analyte using the appropriate resonant peak. A central-relief design is then proposed based on perturbation theory to further improve its sensing performance. The aluminum cross is covered by polyimide, which can interfere with the scattering field on the metal surface and affect the transmission results. For both transmission dips, the optimized structure realizes higher sensitivities of 111.7 GHz/RIU and 262.5 GHz/RIU, respectively. More significantly, the optimized structure also has the characteristic of a wide and non-multiplexed refractive index range. In addition, the effects of analyte thickness and polyimide layer thickness on sensor performance are also discussed. The proposed structure opens up new prospects in the design of multiple-band terahertz metamaterial sensors. It can also meet the sensing needs of biomedical, environmental monitoring, and industrial manufacturing.

Terahertz Membrane Sensing Based on Terahertz Composite Slabs with Enhanced Fields

Ultrasensitive Terahertz Biodetection Using Metasensors Based on Parity-Time Symmetry

High-Q Fano Resonance in Subwavelength Stub-Wall-Coupled MDM Waveguide Structure and Its Terahertz Sensing Application

Tunable Dual-Band Ultrasensitive Stereo Metamaterial Terahertz Sensor

High‐Performance Terahertz Sensing at Exceptional Points in a Bilayer Structure

Dual-band terahertz metamaterial sensor and its sensing capacity enhanced with a central-relief design

Terahertz Sensing: High‐Performance Terahertz Sensing at Exceptional Points in a Bilayer Structure (adv. Theory Simul. 9/2018)

Dual-band refractometric terahertz biosensing with intense wave-matter-overlap microfluidic channel

Terahertz metamaterial biosensor based on open square ring

Design of Tunable Dual-Band Terahertz Metamaterial Absorber With Liquid Crystal Integrated On-Chip

Ultrasensitive THz Sensor Based on Centrosymmetric F-Shaped Metamaterial Resonators

Terahertz meta-biosensor based on high-Q electrical resonance enhanced by the interference of toroidal dipole

An Ultra-thin, Switchable Ultra-narrow Band Absorber for High-performance Terahertz Sensing

Five narrow bands terahertz metamaterial absorber based on metal and Dirac semi-metal for high sensitivity refractive index sensing

High-Sensitive Terahertz Biosensor From A Thin Metamaterial

Terahertz Fingerprint Metasurface Sensor Based on Temperature Variation for Trace Molecules

A High-Efficiency Terahertz Sensor Based on Surface Lattice Resonance Metasurface for Biochemical Detection

Electric Field Dropping Effect Enhanced Extraordinary Sensitivity of THz Electromagnetically Induced Transparency Metamaterial

Advanced Terahertz Refractive Sensing and Fingerprint Recognition Through Metasurface-Excited Surface Waves

Carbon Nanotubes Film Integrated With Silicon Microfluidic Channel for a Novel Composite THz Metasurface

Ultrasensitive Flexible Terahertz Plasmonic Metasurface Sensor Based on Bound States in the Continuum