Terahertz Fingerprint Metasurface Sensor Based on Temperature Variation for Trace Molecules

Weijin Wang,Mingjun Sun,Jie Lin,Ying Xue,Yanpeng Shi
DOI: https://doi.org/10.3390/bios14070318
2024-06-25
Biosensors
Abstract:Terahertz (THz) spectroscopy has demonstrated significant potential for substance detection due to its low destructiveness and due to the abundance of molecular fingerprint absorption signatures that it contains. However, there is limited research on the fingerprint detection of substances at different temperatures. Here, we propose a THz metamaterial slit array sensor that exploits localized surface plasmons to enhance the electric field within the slit. The transmission peak frequency can be modulated via temperature adjustments. This method enables the detection of molecular absorption characteristics at multiple spectral frequency points, thereby achieving a specific and highly sensitive detection of characteristic analyte fingerprint spectra. Additionally, the sensor supports the detection of substances at multiple temperatures and sensitively identifies changes in their absorption properties as a function of temperature. Our research has employed temperature variation to achieve a highly sensitive and specific detection of trace analytes, offering a new solution for THz molecular detection.
chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to improve the detection sensitivity and specificity of trace - molecule fingerprint spectra in the terahertz (THz) band. Specifically, the researchers proposed a terahertz fingerprint metasurface sensor based on temperature change. By using local surface plasmons (LSPs) to enhance the electric field, high - sensitivity detection of the absorption characteristics of trace molecules at different temperatures can be achieved. This method can not only detect the absorption characteristics of substances at multiple temperatures, but also sensitively identify the changes in their absorption properties with temperature, providing a new solution for terahertz molecule detection. ### Main Problems and Solutions: 1. **Improve Detection Sensitivity**: - **Problem**: Traditional terahertz spectroscopy methods usually require a large amount of analyte to observe its characteristic fingerprint spectra, resulting in low detection sensitivity. - **Solution**: By designing a terahertz metamaterial nano - slit array sensor based on temperature change, using the temperature - sensitive material InSb to form a nano - slit structure and generate local surface plasmons (LSPs) to significantly enhance the electric field, thereby improving the detection sensitivity. 2. **Achieve Detection at Multiple Temperatures**: - **Problem**: In existing research, most structures can only detect the absorption characteristics of materials at a single frequency point through the resonance peak, and cannot accurately analyze the absorption spectrum curve within a specific frequency range. - **Solution**: By continuously changing the temperature, the resonance peak is located at different frequency points, thereby achieving multi - frequency - sensitive detection of molecular absorption characteristics and forming an envelope curve describing the characteristic absorption spectrum. 3. **Detect Specific Substances**: - **Problem**: For some specific substances (such as RDX and CL - 20), it is necessary to detect their absorption characteristics at different temperatures, especially the change in the absorption characteristics of CL - 20 before and after the ε–γ phase transition. - **Solution**: By coating RDX and CL - 20 on the sensor surface and detecting their absorption characteristics at different temperatures respectively, the absorption peak of RDX at 0.88 THz and the different absorption curves of CL - 20 at 298 K and 453 K were successfully observed. ### Key Technical Points: - **Local Surface Plasmons (LSPs)**: Utilize the LSPs generated by the InSb material at a specific temperature to significantly enhance the electric field and improve the detection sensitivity. - **Temperature - Sensitive Material InSb**: The dielectric constant of InSb changes with temperature. By adjusting the temperature, the resonance frequency can be changed to achieve broadband transmission envelopes. - **Multi - Temperature Detection**: By adjusting the slit length and temperature, the absorption characteristics of substances can be detected at multiple temperatures, forming an envelope curve and achieving high - sensitivity detection of trace molecules. ### Experimental Results: - **RDX Detection**: The detection limit of the sensor for RDX is 1.61 µg/cm², and it can accurately amplify and detect the characteristic absorption fingerprint of RDX. - **CL - 20 Detection**: The characteristic absorption curves of CL - 20 were successfully detected at 298 K and 453 K, and the change in its absorption characteristics before and after the ε–γ phase transition was observed. In conclusion, this paper significantly improves the detection sensitivity and specificity of trace - molecule fingerprint spectra by designing a terahertz metasurface sensor based on temperature change, providing new techniques and methods for terahertz molecule detection.