Corrigendum to “Improving comfort level in traffic flow of CACC vehicles at lane drop on two-lane highways” [Physica A 575 (2021) 126055]

Huaqing Liu,Rui Jiang

DOI: https://doi.org/10.1016/j.physa.2022.127361

2022-01-01

Abstract:The authors of this research article apologize for the wrong traffic capacity used in Figure 5.

What problem does this paper attempt to address?

Corrigendum: A CFD numerical simulation of particle deposition characteristics in automobile tailpipe: power abatement pathways

Rui Zhang,Ming Gao,Mao Fan

DOI: https://doi.org/10.3389/fenrg.2024.1494677

IF: 3.4

2024-10-09

Frontiers in Energy Research

Abstract:This article is a correction to: A CFD numerical simulation of particle deposition characteristics in automobile tailpipe: power abatement pathways

energy & fuels
Corrigendum to “simulation of Cohesive Particle Motion in a Sound-Assisted Fluidized Bed” [powder Technology 207 (2011) 65–77]

Wang Shuai,Li Xiang,Lu Huilin,Liu Guodong,Wang Jiaxing,Xu Pengfei

DOI: https://doi.org/10.1016/j.powtec.2024.119693

IF: 5.64

2024-01-01

Powder Technology

Abstract:We find some mistakes in the operating conditions or the parameter units of Table 1 and some figures of our article published in Powder Technology. (Wang Shuai, Li Xiang, Lu Huilin⁎, Liu Guodong, Wang Jiaxing, Xu Pengfei. Simulation of cohesive particle motion in a sound-assisted fluidized bed, Powder Technology 207 (2011) 65–77). Thus, we send a corrigendum for correction. If need more requirements, please let me know as soon as possible.
Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Xiaoming Bai,Miguel A. Bessa,António R. Melro,Pedro P. Camanho,Licheng Guo,Wing Kam Liu

DOI: https://doi.org/10.1016/j.compstruct.2016.05.081

IF: 6.3

2016-01-01

Composite Structures

Abstract:The authors regret to inform that one of the modifications proposed in the article “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” [1] was found to be unnecessary: the paraboloid yield criterion is sufficient to describe the shear behavior of the epoxy matrix considered (Epoxy 3501-6). The authors recently noted that the experimental work [2] used to validate the pure matrix response considered engineering shear strain instead of its tensorial counter-part, which caused the apparent inconsistency with the paraboloid yield criterion.
Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

J F Zhou,C Y Liu,K Z He,X X Wei

DOI: https://doi.org/10.1016/j.heliyon.2024.e28814

IF: 3.776

2024-03-30

Heliyon

Abstract:[This corrects the article DOI: 10.1016/j.heliyon.2024.e24428.].
Erratum to: Transmission risk of patients with COVID-19 meeting discharge criteria should be interpreted with caution (Journal of Zhejiang University-SCIENCE B, (2020), 21, 5, (408-410), 10.1631/jzus.B2000117)

Jun wei Su,Wen rui Wu,Guan jing Lang,Hong Zhao,Ji fang Sheng

DOI: https://doi.org/10.1631/JZUS.B20E0117

2020-01-01

Abstract:The original version of this article unfortunatelycontained a mistake. For Fig. 1a in p.409, the citationof a reference, as well as the permission to reprint thispicture, was missing. The correct version and thecorresponding reference are given below: (a) Chest computed tomography (CT) image of Patient 1 onadmission presents multiple ground-glass opacities distributedin the periphery of inferior lobe of both lungs. Reprinted fromZhang et al. (2020), with kind permission from SpringerNature.
Corrigendum to “Evaluation of different air distribution systems in a commercial airliner cabin in terms of comfort and COVID-19 infection risk” Build. Environ., Volume 208, January 2022, 108590

Mingxin Liu,Junjie Liu,Qing Cao,Xingyang Li,Sumei Liu,Shengcheng Ji,Chao-Hsin Lin,Daniel Wei,Xiong Shen,Zhengwei Long,Qingyan Chen

DOI: https://doi.org/10.1016/j.buildenv.2022.108939

IF: 7.093

2022-04-01

Building and Environment

Abstract:[This corrects the article DOI: 10.1016/j.buildenv.2021.108590.].

engineering, environmental,construction & building technology, civil
Corrigendum to ‘vibration Control of Beams with Active Constrained Layer Damping’

Fengming Li,Kikuo Kishimoto,Zhaobo Chen,Wenhu Huang

DOI: https://doi.org/10.1088/0964-1726/18/11/119801

IF: 4.1

2009-01-01

Smart Materials and Structures

Abstract:This note corrects two errors in our previous paper ( Li et al 2008 Smart Mater. Struct. 17 065036) in which the active vibration control of beams treated with active constrained layer damping (ACLD) was studied analytically. The equation of motion of the whole beam/ACLD system is deduced again using Hamilton's principle with the Rayleigh–Ritz method. Numerical results are recalculated and conclusions similar to those of Li et al ( 2008 Smart Mater. Struct. 17 065036) can also be drawn.
Corrigendum to “High-Fidelity Micro-Scale Modeling of the Thermo-Visco-plastic Behavior of Carbon Fiber Polymer Matrix Composites” [compos Struct 134 (2015) 132–141]

Xiaoming Bai,Miguel A. Bessa,António R. Melro,Pedro P. Camanho,Licheng Guo,Wing Kam Liu

DOI: https://doi.org/10.1016/j.compstruct.2016.05.081

IF: 6.3

2016-01-01

Composite Structures

Abstract:The authors regret to inform that one of the modifications proposed in the article “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” [1] was found to be unnecessary: the paraboloid yield criterion is sufficient to describe the shear behavior of the epoxy matrix considered (Epoxy 3501-6). The authors recently noted that the experimental work [2] used to validate the pure matrix response considered engineering shear strain instead of its tensorial counter-part, which caused the apparent inconsistency with the paraboloid yield criterion.
Correction: Investigation of Injury Severity in Urban Expressway Crashes: A Case Study from Beijing

Quan Yuan,Xuecai Xu,Junwei Zhao,Qiang Zeng

DOI: https://doi.org/10.1371/journal.pone.0236911

IF: 3.7

2020-01-01

PLoS ONE

Abstract:[This corrects the article DOI: 10.1371/journal.pone.0227869.].
Corrections to “A Novel Tunnel FET Design Through Adaptive Bandgap Engineering with Constant Sub-Threshold Slope over 5 Decades of Current and High ${i_{{\mathrm {on}}}}/{i_{{\mathrm {OFF}}}}$ Ratio” [may 17 540-543]

Yang Zhao,Chunlei Wu,Qianqian Huang,Cheng Chen,Jiadi Zhu,Lingyi Guo,Rundong Jia,Zhu Lv,Yuchao Yang,Ming Li,Ru Huang

DOI: https://doi.org/10.1109/led.2018.2810758

IF: 4.8157

2018-01-01

IEEE Electron Device Letters

Abstract:In the above paper, there is an error in the information of corresponding author’s email address. The corrected corresponding author’s email address information is provided.
Correction: Corrigendum: Autophagy-associated alpha-arrestin signaling is required for conidiogenous cell development in Magnaporthe oryzae

Dong, Bo,Xu, Xiaojin,Chen, Guoqing,Zhang, Dandan,Tang, Mingzhi,Xu, Fei,Liu, Xiaohong,Wang, Hua,Zhou, Bo

DOI: https://doi.org/10.1038/srep33939

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Scientific Reports 6: Article number: 30963; published online: 08 August 2016; updated: 30 September 2016 This Article contains a typographical error in the Acknowledgements section. “We would also like to thank Li Xe and Xijiao Song (Zhejiang Academy of Agricultural Sciences, Hangzhou, China) for technical assistance on the confocal microscopic analysis”.
Erratum To: Novel Test Scenario Generation Technology for Performance Evaluation of Automated Vehicle

Shuang Li,Wei Li,Penghui Li,Ping Ma,Ming Yang

DOI: https://doi.org/10.1007/s12239-023-0137-z

2022-01-01

International Journal of Automotive Technology

Abstract:This is the Editorial Board of the International Journal of Automotive Technology. In 11th Feb, 2022 we accepted a paper entitled “Novel Test Scenario Generation Technology for Performance Evaluation of Automated Vehicle”. According to the request from the authors of this article, we make a correction announcement of the grant number. Please refer to Table 1 for details.
Corrigendum to “surface Effect on the Contact Problem of a Piezoelectric Half-Plane” [int. J. Solids Struct, 185-186 (2020) 380–393]

Hongxia Song,Liao-Liang Ke,Jie Su,Jie Yang,S. Kitipornchai,Yue‐Sheng Wang

DOI: https://doi.org/10.1016/j.ijsolstr.2020.03.002

IF: 3.667

2020-01-01

International Journal of Solids and Structures

Abstract:This corrigendum corrects some errors of the paper entitled “Surface effect on the contact problem of a piezoelectric half-plane”, International Journal of Solids and Structures 185-186 (2020) 380–393 (Song et al., 2020). Because there is an error in the Fortran code when we calculate the numerical solution of the contact stress and electric displacement, their values become smaller compared to the original results. Moreover, the influencing trends of the surface effect are slightly different from the original results. However, the formulations of the original paper are intact.
Corrections to “integrated Urban Traffic Control for the Reduction of Travel Delays and Emissions” [dec 13 1609-1619]

Anahita Jamshidnejad,Shu Lin,Yugeng Xi,Bart De Schutter

DOI: https://doi.org/10.1109/tits.2018.2844465

IF: 8.5

2018-01-01

IEEE Transactions on Intelligent Transportation Systems

Abstract:The corrections given involve Equations (4) , (5) , (9) in the S-model and Equations (13)–(16) in the integrated flow and emission model introduced in [1] . For details and extensive proofs of the proposed corrections and modifications, we refer the readers to [2] and [3] . Moreover, we propose some extensions/modifications to [1, eq. (9)] that result in a simple formula that can be used to compute the integral in [1, eq. (9)] . Since the S-model was originally introduced in [4] , the corrections and modifications given for the S-model in this paper also hold for [4] .
Correction to: Pyrolysis characteristic study on seat cushion materials of China’s high-speed train

Junhai Liang,Bingsong Wang,Longlong Zhu,Hongshuang Wang,Changhai Li,Shouxiang Lu

DOI: https://doi.org/10.1007/s10973-020-10174-3

IF: 4.755

2020-01-01

Journal of Thermal Analysis and Calorimetry

Abstract:In the original version of the article, the order of funding program in the acknowledgement section was published incorrectly.
Simulation of cohesive particle motion in a sound-assisted fluidized bed (vol 207, pg 65, 2011)

Shuai Wang,Xiang Li,Huilin Lu,Guodong Liu,Jiaxing Wang,Pengfei Xu

DOI: https://doi.org/10.1016/j.powtec.2024.119693

IF: 5.64

2024-01-01

Powder Technology

Abstract:We find some mistakes in the operating conditions or the parameter units of Table 1 and some figures of our article published in Powder Technology. (Wang Shuai, Li Xiang, Lu Huilin*, Liu Guodong, Wang Jiaxing, Xu Pengfei. Simulation of cohesive particle motion in a sound -assisted fluidized bed, Powder Technology 207 (2011) 65-77). Thus, we send a corrigendum for correction. If need more requirements, please let me know as soon as possible.
Errata to “joint User Pairing and Power Allocation Design for Heavy Loaded Full-Duplex Small Cell Systems”

Lu Chen,Caijun Zhong,Hai Lin,Zhaoyang Zhang

DOI: https://doi.org/10.1109/tvt.2022.3193394

IF: 6.8

2022-01-01

IEEE Transactions on Vehicular Technology

Abstract:In this errata, we make corrections to some mistakes in our published paper [1].
Erratum: “Thermodynamic effects at Venturi cavitation in different liquids” [Phys. Fluids <b>34</b>, 083310 (2022)]

Zhigang Zuo,Haochen Zhang,Zibo Ren,Hui Chen,Shuhong Liu

DOI: https://doi.org/10.1063/5.0122748

IF: 4.6

2022-01-01

Physics of Fluids

Abstract:First Page
Corrections to “Practical Fixed-Time Consensus Tracking for Multiple Euler–Lagrange Systems With Stochastic Packet Losses and Input/Output Constraints” [2021 DOI: 10.1109/JSYST.2021.3112720]

He Li,Cheng-Lin Liu,Ya Zhang,Yang-Yang Chen

DOI: https://doi.org/10.1109/jsyst.2021.3126187

IF: 4.802

2022-03-01

IEEE Systems Journal

Abstract:In [1], several errors were introduced during the production process, which are corrected here.

computer science, information systems,telecommunications,engineering, electrical & electronic,operations research & management science
Corrigendum: Comparison of Newtonian and Non-newtonian Fluid Models in Blood Flow Simulation in Patients With Intracranial Arterial Stenosis

Haipeng Liu,Linfang Lan,Jill Abrigo,Hing Lung Ip,Yannie Soo,Dingchang Zheng,Ka Sing Wong,Defeng Wang,Lin Shi,Thomas W. Leung,Xinyi Leng

DOI: https://doi.org/10.3389/fphys.2021.782647

IF: 4

2021-10-19

Frontiers in Physiology

Abstract:[This corrects the article DOI: 10.3389/fphys.2021.718540.].

physiology

Corrigendum to “Improving comfort level in traffic flow of CACC vehicles at lane drop on two-lane highways” [Physica A 575 (2021) 126055]

Corrigendum: A CFD numerical simulation of particle deposition characteristics in automobile tailpipe: power abatement pathways

Corrigendum to “simulation of Cohesive Particle Motion in a Sound-Assisted Fluidized Bed” [powder Technology 207 (2011) 65–77]

Erratum: Corrigendum to “High-fidelity micro-scale modeling of the thermo-visco-plastic behavior of carbon fiber polymer matrix composites” (Composite Structures (2015) 134 (132–141))

Corrigendum to "Effect of Sc contents on the mechanical properties and damping capacity of Al-Zn-Mg-Cu-Zr-Sc alloys with different grain structures" [Heliyon 10(2) January 2024 e24428]

Erratum to: Transmission risk of patients with COVID-19 meeting discharge criteria should be interpreted with caution (Journal of Zhejiang University-SCIENCE B, (2020), 21, 5, (408-410), 10.1631/jzus.B2000117)

Corrigendum to “Evaluation of different air distribution systems in a commercial airliner cabin in terms of comfort and COVID-19 infection risk” Build. Environ., Volume 208, January 2022, 108590

Corrigendum to ‘vibration Control of Beams with Active Constrained Layer Damping’

Corrigendum to “High-Fidelity Micro-Scale Modeling of the Thermo-Visco-plastic Behavior of Carbon Fiber Polymer Matrix Composites” [compos Struct 134 (2015) 132–141]

Correction: Investigation of Injury Severity in Urban Expressway Crashes: A Case Study from Beijing

Corrections to “A Novel Tunnel FET Design Through Adaptive Bandgap Engineering with Constant Sub-Threshold Slope over 5 Decades of Current and High ${i_{{\mathrm {on}}}}/{i_{{\mathrm {OFF}}}}$ Ratio” [may 17 540-543]

Correction: Corrigendum: Autophagy-associated alpha-arrestin signaling is required for conidiogenous cell development in Magnaporthe oryzae

Erratum To: Novel Test Scenario Generation Technology for Performance Evaluation of Automated Vehicle

Corrigendum to “surface Effect on the Contact Problem of a Piezoelectric Half-Plane” [int. J. Solids Struct, 185-186 (2020) 380–393]

Corrections to “integrated Urban Traffic Control for the Reduction of Travel Delays and Emissions” [dec 13 1609-1619]

Correction to: Pyrolysis characteristic study on seat cushion materials of China’s high-speed train

Simulation of cohesive particle motion in a sound-assisted fluidized bed (vol 207, pg 65, 2011)

Errata to “joint User Pairing and Power Allocation Design for Heavy Loaded Full-Duplex Small Cell Systems”

Erratum: “Thermodynamic effects at Venturi cavitation in different liquids” [Phys. Fluids <b>34</b>, 083310 (2022)]

Corrections to “Practical Fixed-Time Consensus Tracking for Multiple Euler–Lagrange Systems With Stochastic Packet Losses and Input/Output Constraints” [2021 DOI: 10.1109/JSYST.2021.3112720]

Corrigendum: Comparison of Newtonian and Non-newtonian Fluid Models in Blood Flow Simulation in Patients With Intracranial Arterial Stenosis