Abstract:The use of carbon fiber reinforced plastic (CFRP) is rapidly increasing in aerospace and automobile applications. This is in large part due to the increase strength and modulus of carbon fiber composites compared to other materials such as glass fiber composites. The fiber-matrix interface has been found to be important for high strength in composites. Methods that have been studied and developed to improve interfacial property of composites include: the addition of coupling agents, surface modifications, chemical reaction control and use of nano-fillers for reinforcement. During mechanical loading the shape of carbon fibers, in a composite, is altered with a concomitant change in electrical resistance. Carbon fibers are used as sensing elements in CFRP due to their electrical conductivity. In some more advanced studies, in CRFP, the carbon fibers were used for both strain sensing and damage sensing. The basic theory, in such studies, was that the movement of carbon fiber could be detected by electrical resistance measurement. During loading, the extent of contact between carbon fibers in a CF tow is altered, and the electrical resistance changes from its initial value. In this work, interfacial properties of carbon fiber/polymer composites were evaluated by such electrical resistance measurements. During the wetting process of CF tows by the polymer resins, the change in electrical resistance was recorded and analyzed. The test results for different carbon fibers and polymer resins exhibited different trends. The electrical resistance change was associated with the different wetting conditions, and the interfacial properties were predicted by these electrical resistance measurements. CF tow/epoxy exhibited the poorest carbon tow wettability, the smallest change in resistance and the poorest IFSS and ILSS. For the four systems studied, the relative change in each of these quantities for the materials of a given composite was roughly proportional to the other measured quantities. This may have some very significant practical importance. It may point the way to use quick easy tests to screen and predict other behaviors for composites of different materials and/or processes. Perhaps a simple resistance change test might be used to predict and select good candidate materials, surface processing techniques for high strength composite applications. The proportional relationship between interfacial adhesion and electrical resistance change was obtained by trend fitting line analyses. Ultimately, it was demonstrated that mechanical properties related to interfacial properties might potentially be predicted by electrical resistance measurement and studies of wetting behavior, using empirical formulas and correlations.

Interface Behaviour of Carbon-Fabric-reinforced Cementitious Matrix Composites with ICCP Technique

Experimental Study on Interface Bonding Fatigue Behavior of C-FRCM Composites in ICCP

Experimental Study on the Behavior of Carbon-Fabric Reinforced Cementitious Matrix Composites in Impressed Current Cathodic Protection

Effect of ICCP on Tensile Performance and Piezoresistive Effect of CFRCM Plates

Effect of ICCP on Tensile Performance of Carbon Fiber Bundles in Seawater Sea-sand Cementitious Matrix

Effect of ICCP on Bond Performance and Piezoresistive Effect of Carbon Fiber Bundles in Cementitious Matrix

Interfacial Evaluation Of Carbon Frinforced Nano-Composites Using Electrical Resistance Measurement With Wetting Tests

Experimental study on dynamic behavior of CFRP-to-steel interface

Uniaxial Tensile Behavior of Anchored Carbon Fabric-Reinforced Cementitious Matrix Plates

Effect of anchorages on C-FRCM/concrete interfacial shear performance

Influence of Cementitious Material Infiltration on Piezoresistive Effect of Carbon Fiber Bundle

Study on the Corroded Hollow Section RC Columns Strengthened by ICCP-SS System

A Pull-out Equivalent Telescopic Layered Failure Model of Carbon Fiber Bundles in Seawater Sea-Sand Cementitious Matrix

Effect of ICCP on conductivity properties of carbon fiber bundles and CFRCM

Flexural Performance of Seawater Sea Sand Concrete Composite Beams Enhanced by Dual-Functional C-FRCM Jackets

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

Pull-Out Performance of Anchored Carbon-Fiber Bundles in Cementitious Matrix

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Experiments on shear behavior of reinforced concrete continuous beams strengthened by C‐FRCM

Experimental Analysis of Corroded RC Continuous Beams Rehabilitated by ICCP-SS under Unsymmetrical Loading

Piezoresistivity in carbon fiber reinforced cement based composites