A Doping Element Improving the Properties of Catalysis: in Situ Raman Spectroscopy Insights into Mn-doped NiMn Layered Double Hydroxide for the Urea Oxidation Reaction

Xu Yang,Huimin Zhang,Wei Xu,Binbin Yu,Yan Liu,Zucheng Wu

DOI: https://doi.org/10.1039/d2cy00308b

IF: 6.177

2022-01-01

Catalysis Science & Technology

Abstract:Potential dependent in situ Raman spectra confirm that Mn doping enables a negative shift in Ni(ii) oxidation onset potential.

What problem does this paper attempt to address?

A Doping Element Improving the Properties of Catalysis: In Situ Raman Spectroscopy Insight into Mn-doped NiMn Layered Double Hydroxide for Urea Oxidation Reaction

Xu Yang,Huimin Zhang,Wei Xu,Binbin Yu,Yan Liu,Zucheng Wu

DOI: https://doi.org/10.1039/d2cy00308b

2022-05-26

Abstract:Elemental doping has been proved to be an efficient means to adjust the performance of Ni-based hydroxides for the electrochemical urea oxidation reaction. However, the mechanism by which elemental doping affects the catalytic activity of such bimetallic catalysts remains unclear and lack of evidence. Herein, we dope Ni(OH)2 with Mn, a typical dopant, show that Mn doping reduces the onset potential of Ni hydroxide oxidation, which favors the generation of electrochemically active NiIIIOOH, and increases the electrochemical reversibility of the Ni redox pair in NiMn layered double hydroxides. In situ Raman spectroscopy analysis provides direct spectroscopic evidence that Mn promotes the production of high-valence NiIIIOOH, specifically from ca. 0.4 V vs. Hg/HgO for Ni(OH)2 to ca. 0.3 V vs. Hg/HgO for Ni0.2Mn0.8 LDHs, i.e., a negative shift of 100 mV. The Raman spectroscopy results also reveal that Mn doping elongates the Ni−O bond in NiOOH and leads to increased phase structure disorder. Consequently, the UOR performance of Ni1-xMnx LDH surpasses that of Ni(OH)2. This study provides important information and clear mechanistic explanation for the crucial roles of dopants in bimetallic electrocatalysts.

chemistry, physical
Bismuth-doped Manganese Molybdenum Bimetallic Oxide Nanorods As a Highly Efficient Nitrogen Reduction Catalyst

Huhu Yin,Ziyang Song,Xiujing Xing,Ling Miao,Yaokang Lv,Lihua Gan,Mingxian Liu,Wei Xiong

DOI: https://doi.org/10.1039/d4qm00502c

IF: 8.6834

2024-01-01

Materials Chemistry Frontiers

Abstract:Manganese molybdate has been shown to be an excellent NRR catalyst due to its uniform rod-like structure and large specific surface area, and in order to further improve its catalytic performance, MnMoO4 has been modified using an elemental doping strategy. Here, we developed a simple scheme for doping elemental Bi into MnMoO4 and explored the effects of different doping amounts on the properties of MnMoO4 by adjusting the amount of Bi dopant. The results showed that Bi was successfully introduced into the lattice of MnMoO4 and induced lattice perturbations and led to the generation of more oxygen vacancies. 6% Bi-MnMoO4 exhibited good catalytic performance with an NH3 yield of 19.22 mu g h-1 mgcat.-1 and high FE (17.13%) at -0.40 V (vs.RHE) and also exhibited excellent electrochemical stability and structural durability. Cyclic voltammetry cycling tests reveal an increased electrochemical active surface area, exposing more active sites and thereby demonstrating superior electrocatalytic activity, as well as exceptional electrochemical stability and structural durability. This study provides new strategies for constructing efficient nitrogen reduction reaction catalysts. Bi-doped MnMoO4 nanorods prepared by a simple hydrothermal method exhibit an excellent electrocatalytic nitrogen gas reduction performance at -0.40 V vs. RHE.
Active Site Identification and Modification of Electronic States by Atomic-Scale Doping to Enhance Oxide Catalyst Innovation

Ying Xin,Nana Zhang,Qian Li,Zhaoliang Zhang,Xiaoming Cao,Lirong Zheng,Yuewu Zeng,James A. Anderson

DOI: https://doi.org/10.1021/acscatal.7b02638

IF: 12.9

2018-01-01

ACS Catalysis

Abstract:Identification of the catalytic active site is critical in the design and development of advanced heterogeneous catalysts. Many high-precision experimental techniques, as well as computational methods, have been developed to address this problem, but identifying the active site for composite oxide catalysts remains a challenging task because of their complexity and indiscernible microstructures. Herein, we provide a key new insight into the active site within a composite oxide catalyst by investigating an iron-based oxide catalyst with complex components. The dopant atoms with octahedral coordination located at substitution sites in the Fe2O3 lattice tune the electronic structure of the adjacent iron atoms, which act as the active sites that lead to enhanced catalytic activity. This atomic-scale doping is different from the emerging single-atom catalyst concept, in which the single atom on the support is the active site, and which provides an alternative methodology of improving the activity of heterogeneous catalysts with maximized heteroatom efficiency.
Synthesis of defective Ni-Mn layered double hydroxides nanosheets via alkali-assisted Mo doping for urea electro-oxidation

Ming Yang,Wanyu Ge,Zirui Liu,Qiang Yue,Jun Zhang,Yanping Lv,Hao Wu

DOI: https://doi.org/10.1016/j.fuel.2023.129626

IF: 7.4

2023-08-30

Fuel

Abstract:Urea oxidation reaction (UOR) with favorable thermodynamic potential provides a good application prospect in renewable energy infrastructure. However, the sluggish kinetics caused by 6e - transfer greatly hinders the usage of urea as fuel, efficient catalysts are urgently needed in consequence. In response, alkali-assisted Mo doped into Ni-Mn layered double hydroxides (Mo-NiMnLDH-OH) with laminate structure is synthesized via one-pot hydrothermal method. The alkali-assisted Mo doping contributes the modified morphology and microstructure, the tuned chemical states of Ni and Mn species, simultaneously generates defects and more active sites. The existence of alkali plays a vital role in promoting the Mo doping. Without alkali, the Mo doping should damage the laminate structure, and the chemical states of active sites cannot be efficiently tuned. When used as catalyst for UOR, the current density of 45.3 mA cm −2 and a specific current activity of 1132.8 mA cm −2 mg −1 for Mo-NiMnLDH-OH can be achieved at the potential of 1.623 V (vs. RHE), which is 4-fold higher than that for Ni-Mn layered double hydroxides without doping. Both indirect electrochemical and direct urea oxidation processes occur when using Mo-NiMnLDH-OH as catalyst, and the existence of Mo species will facilitate the occurrence of direct urea oxidation process. This work paves an effective way to synergistically engineer of Mo doping and defects into Ni-based layered double hydroxides for UOR.

energy & fuels,engineering, chemical
Ni-Doped MnO 2 Nanosheet Arrays for Efficient Urea Oxidation

Huaiyu Zhang,Yu Bai,Xue Lu,Liang Wang,Yan Zou,Yujia Tang,Dongdong Zhu

DOI: https://doi.org/10.1021/acs.inorgchem.3c00234

IF: 4.6

2023-03-12

Inorganic Chemistry

Abstract:Urea oxidation reaction (UOR), with a low thermodynamic potential, offers great promise for replacing anodic oxygen evolution reaction of electrolysis systems such as water splitting, carbon dioxide reduction, etc., thus reducing the overall energy consumption. To promote the sluggish kinetics of UOR, highly efficient electrocatalysts are required, and Ni-based materials have been widely investigated. However, most of these reported Ni-based catalysts suffer from large overpotentials, as they...

chemistry, inorganic & nuclear
Enhanced electrocatalytic activity of sulfur and tungsten co-doped nickel hydroxide nanosheets for urea oxidation

Ming Yang,Yangyang Liu,Wanyu Ge,Zirui Liu

DOI: https://doi.org/10.1016/j.colsurfa.2023.131226

2023-03-05

Abstract:Ni(OH) 2 is regarded as one of the most promising electrocatalyst candidates for urea oxidation reaction due to its structural diversity and low cost, however the inferior electrocatalytic activity severely limits its application. Herein, tungsten and sulfur species are successively doped into Ni(OH) 2 nanosheets (S,W-Ni(OH) 2 ) and synergistically promote the electrocatalytic activity towards urea electro-oxidation. Compared with Ni(OH) 2 without doping or Ni(OH) 2 doping with only one species, S,W-Ni(OH) 2 exhibits faster reaction kinetic, larger ECSA, smaller charge transfer and urea adsorption resistance, which should guarantee the enhanced electrocatalytic activity. Potential dependent impedance measurements indicate that tungsten doping can prevent the electrocatalyst from being poisoned and sulfur doping will further enhance the charge transfer and urea adsorption ability. Therefore, simultaneously introducing sulfur and tungsten species into Ni(OH) 2 should offer a promising way for designing efficient Ni-based electrocatalysts towards urea electro-oxidation.

chemistry, physical
Insight into the Structure of Mn-NiS2 During Urea Oxidation Using Combined in Situ X-ray Absorption Spectroscopy and Attenuated Total Reflectance Surface-Enhanced Infrared Absorption Spectroscopy

Naiyuan Duan,Tianxin Hou,Wei Zheng,Yafei Qu,Peichen Wang,Jiahe Yang,Yang,Dongdong Wang,Jitang Chen,Qianwang Chen

DOI: https://doi.org/10.1021/acscatal.3c05369

IF: 12.9

2024-01-01

ACS Catalysis

Abstract:The urea electrocatalytic oxidation reaction (UOR) has enormous potential as an ideal alternative anode reaction for water splitting owing to its lower thermodynamic equilibrium potential of 0.37 V versus reversible hydrogen electrode (vs RHE). Nickel-based materials, especially NiOOH, are considered to be one of the most promising non-noble metal catalysts for UOR due to their inexpensive cost and rich abundance. However, NiOOH displays a high overpotential and poor long-term stability. Herein, our density functional theory calculations show that the rate-determining step for UOR is desorption of CO2 on NiOOH, and Mn-doped NiOOH has the lowest energy for CO2 desorption. Hence, we prepared a Mn-NiS2 precatalyst that would transform into the active form of Mn-NiOOH during the electrochemical process. The catalyst exhibits good performance for UOR, achieving 100 mA cm(-2) at 1.426 V (vs RHE, without IR correction) for 200 h with no significant voltage change, which is rarely reported for nonprecious-metal UOR catalysts. X-ray absorption near-edge spectroscopy and X-ray diffraction characterization show the transformation from sulfide to oxyhydroxide when a voltage is applied, while in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) proves that Mn-NiOOH accelerates the desorption of CO2 compared to NiOOH.
Doped Mn modulates the local charge distribution of cobalt-based spinel catalysts to promote the availability of ligand lattice oxygen for complete oxidation of methane

Linghe Song,Hang Zhang,Juxia Xiong,Ziyang Chen,Yue Liu,Haitao Zhou,Weixing Yang,Dahua Cao,Haomin Huang,Limin Chen,Mingli Fu,Daiqi Ye

DOI: https://doi.org/10.1016/j.apcatb.2023.123547

IF: 24.319

2023-11-29

Applied Catalysis B Environmental

Abstract:Doping other metals such as Mn, Ni, In, et al. is known as an effective strategy to improve the environmental catalytic performance of Co 3 O 4 . In our works, Mn ions were successfully incorporated into the lattice of Co 3 O 4 via the oxalic acid synchronous complexation method. The Mn ions preferentially occupy octahedrally coordinated Co 3+ sites and constructing the Mn-O-Co structure. In addition, theoretical calculation further verified that the enhanced catalytic performance of Co5Mn1 originated from highly reactive lattice oxygen coordinated with both Mn and Co ions. Significantly, Mn ions transfer more electrons to lattice oxygen. This oxygen sites have the lower oxygen vacancy formation energy (E Ov = 1.94 eV), allowing the lattice oxygen to participate in the reaction following the MvK mechanism in the high temperature range. Collectively, this work is helpful to understand the mechanism of effect of Mn ion doping on the physical and chemical properties of Co-based catalysts.

chemistry, physical,engineering, chemical, environmental
Insight into Mn and Ni Doping of Ni1-Mn PS3 and Mn1-Ni PS3 Nanosheets on Electrocatalytic Hydrogen and Oxygen Evolution Activity

Dmitrii Rakov,Yuzhi Li,Siqi Niu,Ping Xu

DOI: https://doi.org/10.1016/j.jallcom.2018.08.041

IF: 6.2

2018-01-01

Journal of Alloys and Compounds

Abstract:Recently reported transition metal phosphosulfide (MPS3 or MPS) nanosheets (NSs) demonstrated outstanding activity towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and proper doping of a second transition metal might even enhance the catalytic activity. By considering the oxophilicity of the doping element, here we demonstrate the Mn (with higher oxophilicity) and Ni (with lower oxophilicity) doping of Ni1-xMnxPS3 and Mn1-xNixPS3 NSs on their HER and OER activity in alkaline solution. It is found that non-substituted NiPS3 NSs show better catalytic activity than their Mn-doped samples. On the contrary, Ni doping into MnPS3 NSs significantly improves the electrocatalytic performance. This work may substantially expand the understanding of the role of elemental oxophilicity on the electrochemical water splitting activities of Ni/Mn based catalysts.
Enhanced Urea Oxidation Catalysis through Ni Single-Atom Doping on Cu2O Surfaces: A Computational Study

Xiaoqing li,Haiping Lin,Wenjing Huang,Shiyun Xiong,Shaoming Huang

DOI: https://doi.org/10.1039/d4ta02693d

IF: 11.9

2024-05-15

Journal of Materials Chemistry A

Abstract:Electrocatalytic urea oxidation reaction (UOR), featuring a low equilibrium potential, emerges as a promising alternative to the conventional oxygen evolution reaction. However, the UOR suffers from the intrinsic sluggish kinetics due to its six-electron, proton-coupled nature, underscoring the need for the development of highly efficient catalysts. In this work, we have meticulously probed the urea oxidation activities over Ni single-atom doped Cu2O (Ni-Cu2O) and elucidated their underlying mechanisms. The Ni single-atom substituted a copper atom on the surface/subsurface of Cu2O:{110}Cu and Cu2O:{111}O. The theoretical calculation results demonstrated that the Ni-Cu2O:{110}Cu configuration exhibits optimal urea adsorption energy, which is conducive to effectively activating the urea molecule and lowering the energy barriers of the following dehydrogenation and nitrogen-nitrogen coupling. The enhanced catalytic performance is primarily due to the synergistic interplay between the surface copper atoms and the single nickel atom within the Ni-Cu2O:{110}Cu structure. This synergy facilitates the activation of nitrogen in urea by the nickel atom, while the copper atoms robustly adsorb oxygen from urea, collectively modulating the π-electron distribution within the urea molecule to activate N-H and C-N bonds. Remarkably, the overpotential for urea oxidation on this catalyst is only 0.29 V, establishing it as an exemplary candidate for urea electrooxidation. Our research not only unveils the cooperative mechanism intrinsic to Ni-doped Cu2O for urea oxidation but also paves the way for innovative approaches in designing advanced electrocatalysts.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Manganese-facilitated dynamic active-site generation on Ni2P with self-termination of surface reconstruction for urea oxidation at high current density

Zhanhong Zhao,Yinrui Dong,Haoran Ding,Xin Li,Xinghua Chang

DOI: https://doi.org/10.1016/j.watres.2024.121266

2024-04-01

Abstract:Electrochemical urea oxidation reaction (UOR) suffers from sluggish reaction kinetics due to its complex 6-electron transfer processes combined with conversion of complicated intermediates, severely retarding the overall energy conversion efficiency. Herein, manganese-doped nickel phosphide nanosheets (Mn-Ni2P) are constructed and employed for driving UOR. Comprehensive analysis deciphers that Mn doping could efficiently accelerate the surface reconstruction of Mn-Ni2P electrode, generating highly reactive NiOOH-MnOOH heterostructure with local nucleophilic and electrophilic regions. Such unique structure could accelerate the targeted adsorption and activation of C and N atoms, promoting fracture of CN bond in urea. In addition, moderate Mn doping could efficiently enhance the adsorption capacities of urea molecules and some key intermediates, and minish the energy barrier for *CO2 desorption, accelerating refreshing of the catalyst. Consequently, the Mn-Ni2P electrode exhibits excellent UOR catalytic activity, achieving an industrial-level current density of 1000 mA cm-2 at 1.46 V (vs. RHE).
Enhancing electrocatalytic N2 reduction to NH3 by introducing Ni heteroatoms into NiCuOx electrocatalyst

Xinxin Han,Weizhen Zhou,Xin Huang,Haoming Yu,Fangqi Yang,Shixia Chen,Jun Wang

DOI: https://doi.org/10.1039/d4cy00482e

IF: 6.177

2024-05-23

Catalysis Science & Technology

Abstract:Modulating the local electronic structure in 3d transition metal oxides is appealing in N2 reduction reaction (NRR), yet remains challenging. Herein, Ni dopants with higher electronegativity are introduced to tune the electronic density of Cu in flower-like NiCuOx through low-temperature calcination of readily formed NiCu(OH)x precursor. The as-obtained catalyst delivers a remarkable NH3 production of 11.78 μg h–1 mgcat. –1 with a high Faradaic efficiency of 19.28% at a low voltage of -0.2 V, superior to most NRR electrocatalysts at similar voltages. XPS, in-situ Raman, and DFT calculation reveal that the Ni dopant enhances the local electronic density surrounding Cu sites, which is favorable to reducing the energy barrier of the rate-determining (*N2 to *NNH) step of NRR as well as depressing the competing hydrogen evolution reaction. This work provides new insight into the effect of hetero-metal-atom doping on the NRR process and is instructive for the rational design of high-performance electrocatalysts.

chemistry, physical
Mn-doping tuned electron configuration and oxygen vacancies in NiO nanoparticles for stable electrocatalytic oxygen evolution reaction

Yi Liu,Liang Bai,Tao Li,Jinghao Huo,Xiaofei Wang,Lifeng Zhang,Xiaodong Hao,Shouwu Guo

DOI: https://doi.org/10.1016/j.apsusc.2021.151952

IF: 6.7

2022-03-01

Applied Surface Science

Abstract:Manipulating the electronic configuration of electrocatalysts through doping strategies is crucial for the development of preeminent non-precious metal electrocatalysts for oxygen evolution reaction (OER). In this work, Mn-doping NiO nanoparticles with oxygen (O) vacancies (denoted as Mn-NiO-Ov) are synthesized by calcinating the two-dimensional Ni-Mn layered double hydroxides (LDHs) precursors at specific temperatures. Magically, as revealed by structural characterizations and first-principle quantum chemical computations, Mn-doping causes a modification in the electronic structure through the electron transfer from Ni to Mn via O bridges and the modified eg orbital of Ni led by charge transfer is of benefit to the adsorption of O species on Ni sites in Mn-NiO-Ov and promoting the intrinsic metallic property of NiO nanoparticles. Furthermore, it is illustrated that the Mn-NiO-Ov nanoparticles can achieve a lower overpotential of 265 mV at the current density of 10 mA cm−2, and a Tafel slope of 61.3 mV dec−1 under alkaline media. More importantly, the Mn-NiO-Ov nanoparticles show also great stability (98.2%) after 50 h continuously test far more than pure NiO nanoparticles (62.1%). This research provides the theoretical principle for the promotion of electrocatalysts OER activity and stability by doping foreign metal to tune electron configuration.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Single-ion Copper Doping Greatly Enhances Catalytic Activity of Manganese Oxides Via Electronic Interactions.

Xiaolei Hu,Shuya Li,Yaxin Chen,Weiye Qu,Junxiao Chen,Zhen Ma,Xingfu Tang

DOI: https://doi.org/10.1039/c9cc07669g

IF: 4.9

2020-01-01

Chemical Communications

Abstract:Single-ion copper doping greatly enhances catalytic activity of manganese oxides via electronic interactions between copper ions and manganese ions.
Anion Intercalation of NiMn-LDH Accelerating Urea Electrooxidation on Trivalent Nickel

Qian Zheng,Yuandong Yan,Shaonan Zhang,Shicheng Yan,Zhigang Zou

DOI: https://doi.org/10.1016/j.jcat.2024.115814

IF: 7.3

2024-01-01

Journal of Catalysis

Abstract:Reducing the urea oxidation reaction (UOR) barriers is a key knot for accelerating its practical applications. Here, we demonstrate that NiMn-LDH with sulfate anion interaction can enable urea electrooxidation with a low anodic potential of 1.36 V at 100 mA cm(-2). We find that the UOR on NiMn-LDH is driven by Ni3+ species and the Ni3+ generation is the rate-determining step of UOR. Both the Mn doping and sulfate anion interaction contribute to the low-barrier phase transformation from Ni(OH)(2) to NiOOH to produce the Ni3+ state with high activity in UOR, owing to that Mn doping optimizes the electronic states and intercalation of guest anions weakens the interlayer interactions, which ultimately tunes Ni3+ generation kinetics toward the superior UOR activity. Our findings provide new insights into the design of the highly active UOR catalysts.
Modulating Oxygen Vacancies of TiO2 Nanospheres by Mn-Doping to Boost Electrocatalytic N2 Reduction

Haijun Chen,Tongwei Wu,Xue Li,Siyu Lu,Fang Zhang,Yan Wang,Haitao Zhao,Qian Liu,Yonglan Luo,Abdullah M. Asiri,Zhe-sheng Feng,Yanning Zhang,Xuping Sun

DOI: https://doi.org/10.1021/acssuschemeng.0c09009

IF: 8.4

2021-01-01

ACS Sustainable Chemistry & Engineering

Abstract:Electrochemical N-2 reduction reaction (NRR) is an environmentally benign and sustainable approach for NH3 synthesis under ambient conditions, which needs efficient electrocatalyst to meet the enormous challenge of activating the inert N-2 molecule. Recently, TiO2 emerges as an active NRR electrocatalyst with advantages of abundance, nontoxicity, and high thermal stability. Heteroatom doping is an effective oxygen vacancy introduction strategy to manufacture unique electron and structure properties of metal oxides, which will greatly influence the catalysts' activity. In this work, we developed Mn-doped TiO2 nanospheres (Mn-TiO2) for electrochemical NRR. In 0.1 M Na2SO4, Mn-TiO2 shows a large NH3 yield rate of 20.05 mu g h(-1) mg(cat.)(-1) and a high Faradaic efficiency of 11.93%, which are much higher than undoped TiO2. The mechanism of performance improvement is uncovered by density functional theory calculations.
Mechanistic understanding of electron structure regulation by Co Ion-Doping on MnO 2 nanocatalyst during optimizing peroxymonosulfate activation

Aihua Xu,Runshi Chen,Wenpei Zhao,Jiajin Lin,Rongrong Hu,Aimal Khan,Wei Li,Xiaoxia Li,Shuaiqi Zhao,Yongcai Qiu

DOI: https://doi.org/10.1016/j.cej.2023.147052

IF: 15.1

2023-11-03

Chemical Engineering Journal

Abstract:Controlling the electronic structure of the active centre through ion doping modulation has been widely recognized as an effective means to enhance catalytic activity, particularly for MnO 2 -based catalysts. However, existing models fail to fully elucidate the underlying mechanism behind this phenomenon. Here, we utilizes the quenching route to synthesize a variety of MnO 2 -based catalysts (named as Co-MnO 2 -Q) with different Co content, aiming to investigate the catalytic mechanism of MnO 2 in activating peroxymonosulfate (PMS) and establish a correlation between its electronic structure and catalytic activity. Notably, the optimal catalyst (Co-MnO 2 -Q3) exhibited a rate constant (k obs ) for Levofloxacin (LEVO) removal up to 0.105 min −1 , which is eight times higher than that of pure MnO 2 (0.013 min −1 ). Experimental and density functional theory (DFT) investigations have demonstrated that the adsorption of PMS on the constructed catalyst models is an exothermic process, which occurs spontaneously and effectively elongates the O–O bond. Meanwhile, DFT calculations reveal a positive correlation between Co-doped catalyst activity and upward shift of Mn 3d and O 2p band centres. Essentially, Co doping enhances the covalency of Mn–O bonds and increases electron density levels near the Fermi energy, thereby facilitating electron transfer from Mn sites to adsorbed PMS molecules and accelerating both PMS activation and catalytic degradation reactions. This study successfully establishes a descriptor that effectively characterizes the intrinsic activity enhancement of MnO 2 -based catalysts, providing valuable guidance for designing more advanced catalytic systems based on MnO 2 .

engineering, chemical, environmental
Comprehensive Understanding the Promoting Effect of Dy-doping on MnFeOx Nanowires for the Low-Temperature NH3-SCR of NOx: an Experimental and Theoretical Study

Chen Gao,Bing Xiao,Jian-Wen Shi,Chi He,Baorui Wang,Dandan Ma,Yonghong Cheng,Chunming Niu

DOI: https://doi.org/10.1016/j.jcat.2019.10.003

IF: 7.3

2019-01-01

Journal of Catalysis

Abstract:Recently, Mn-based catalysts doped/modified by rare earth elements for the selective catalytic reduction (SCR) of NOx with NH3 are becoming a new research hotspot. In current work, Dy-doped MnFe oxides with the morphology of one-dimensional nanowire are successfully prepared by using electrospinning method for the first time, and the catalytic performances for the NH3-SCR of NOx are investigated in detail. It is found several positive factors are introduced due to the doping of Dy with an appropriate amount, such as the enhanced surface Mn4+ concentration and surface chemical adsorption of oxygen, the increased adsorption capacity for NH3 and NO. Theoretical calculation reveals that the Dy-doping causes the larger depletion of electron density of mainly O atoms on the surface of MnFeDy than that of MnFe case, which energetically favors the adsorption of NH3 and NO molecules. Our results fully confirm that Dy is an effective doped element of Mn-based catalysts for developing SCR catalysts with excellent low-temperature de-NOx performance. (C) 2019 Elsevier Inc. All rights reserved.
Modulating Oxygen Vacancies of TiO 2 Nanospheres by Mn-Doping to Boost Electrocatalytic N 2 Reduction

Haijun Chen,Tongwei Wu,Xue Li,Siyu Lu,Fang Zhang,Yan Wang,Haitao Zhao,Qian Liu,Yonglan Luo,Abdullah M. Asiri,Zhe-sheng Feng,Yanning Zhang,Xuping Sun

DOI: https://doi.org/10.1021/acssuschemeng.0c09009

2021-01-21

Abstract:Electrochemical N2 reduction reaction (NRR) is an environmentally benign and sustainable approach for NH3 synthesis under ambient conditions, which needs efficient electrocatalyst to meet the enormous challenge of activating the inert N2 molecule. Recently, TiO2 emerges as an active NRR electrocatalyst with advantages of abundance, nontoxicity, and high thermal stability. Heteroatom doping is an effective oxygen vacancy introduction strategy to manufacture unique electron and structure properties of metal oxides, which will greatly influence the catalysts' activity. In this work, we developed Mn-doped TiO2 nanospheres (Mn-TiO2) for electrochemical NRR. In 0.1 M Na2SO4, Mn-TiO2 shows a large NH3 yield rate of 20.05 μg h–1 mgcat.–1 and a high Faradaic efficiency of 11.93%, which are much higher than undoped TiO2. The mechanism of performance improvement is uncovered by density functional theory calculations.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c09009?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c09009</a>.Experimental section, EDX and UV–vis absorption spectra, Nyquist plots, Tables S1 (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c09009/suppl_file/sc0c09009_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Improving electrochemical nitrate reduction activity of layered perovskite oxide La2CuO4 via B-site doping

Zhiheng Gong,Wenye Zhong,Zuyun He,Chenghao Jia,Deng Zhou,Nian Zhang,Xiongwu Kang,Yan Chen

DOI: https://doi.org/10.1016/j.cattod.2022.04.019

IF: 5.3

2022-01-01

Catalysis Today

Abstract:Electrochemical reduction of nitrate into ammonia (NO3-RR) has attracted great attentions because of the potential application for environmental remediation and energy storage. Despite many pioneering works on electrocatalysts development, the correlation between material properties and NO3-RR activity is still not fully understood. Herein, taking layered Ruddlesden-Popper type oxide La2CuO4 as a model system, we demonstrate B-site cation doping as an effective approach for modulating NO3-RR activities. While Co dopant at Cu site strongly enhanced the NO3-RR activity and NH3 selectivity, Zn and Ni dopants lead to slightly enhanced and suppressed NO3-RR performance, respectively. The distinct reaction kinetics of NO3-RR on La2Cu0.8M0.2O4 with different dopants are further revealed by in-situ Fourier transform infrared spectroscopy measurement. Synchrotron-based X-ray absorption spectroscopy showed that B-site doping can effectively regulate metal-oxygen hybridization, leading to strongly tuned surface adsorption characteristics and NO3-RR activity. The results of this work can guide the design of highly active (electro)catalysts for environmental and energy devices.

A Doping Element Improving the Properties of Catalysis: in Situ Raman Spectroscopy Insights into Mn-doped NiMn Layered Double Hydroxide for the Urea Oxidation Reaction

A Doping Element Improving the Properties of Catalysis: In Situ Raman Spectroscopy Insight into Mn-doped NiMn Layered Double Hydroxide for Urea Oxidation Reaction

Bismuth-doped Manganese Molybdenum Bimetallic Oxide Nanorods As a Highly Efficient Nitrogen Reduction Catalyst

Active Site Identification and Modification of Electronic States by Atomic-Scale Doping to Enhance Oxide Catalyst Innovation

Synthesis of defective Ni-Mn layered double hydroxides nanosheets via alkali-assisted Mo doping for urea electro-oxidation

Ni-Doped MnO 2 Nanosheet Arrays for Efficient Urea Oxidation

Enhanced electrocatalytic activity of sulfur and tungsten co-doped nickel hydroxide nanosheets for urea oxidation

Insight into the Structure of Mn-NiS2 During Urea Oxidation Using Combined in Situ X-ray Absorption Spectroscopy and Attenuated Total Reflectance Surface-Enhanced Infrared Absorption Spectroscopy

Doped Mn modulates the local charge distribution of cobalt-based spinel catalysts to promote the availability of ligand lattice oxygen for complete oxidation of methane

Insight into Mn and Ni Doping of Ni1-Mn PS3 and Mn1-Ni PS3 Nanosheets on Electrocatalytic Hydrogen and Oxygen Evolution Activity

Enhanced Urea Oxidation Catalysis through Ni Single-Atom Doping on Cu2O Surfaces: A Computational Study

Manganese-facilitated dynamic active-site generation on Ni2P with self-termination of surface reconstruction for urea oxidation at high current density

Enhancing electrocatalytic N2 reduction to NH3 by introducing Ni heteroatoms into NiCuOx electrocatalyst

Mn-doping tuned electron configuration and oxygen vacancies in NiO nanoparticles for stable electrocatalytic oxygen evolution reaction

Single-ion Copper Doping Greatly Enhances Catalytic Activity of Manganese Oxides Via Electronic Interactions.

Anion Intercalation of NiMn-LDH Accelerating Urea Electrooxidation on Trivalent Nickel

Modulating Oxygen Vacancies of TiO2 Nanospheres by Mn-Doping to Boost Electrocatalytic N2 Reduction

Mechanistic understanding of electron structure regulation by Co Ion-Doping on MnO 2 nanocatalyst during optimizing peroxymonosulfate activation

Comprehensive Understanding the Promoting Effect of Dy-doping on MnFeOx Nanowires for the Low-Temperature NH3-SCR of NOx: an Experimental and Theoretical Study

Modulating Oxygen Vacancies of TiO 2 Nanospheres by Mn-Doping to Boost Electrocatalytic N 2 Reduction

Improving electrochemical nitrate reduction activity of layered perovskite oxide La2CuO4 via B-site doping