Inorganic Salt-Induced Synthesis of Lignin Derived Hierarchical Porous Carbon with Self-Embedded Quantum Dots and Ultrahigh Mesoporosity for Supercapacitors

Lansheng Wei,Zhengguo Wu,Jiaming Li,Yutong Xiong,Xiaoying Wang

DOI: https://doi.org/10.1039/d2nj01809h

IF: 3.3

2022-01-01

New Journal of Chemistry

Abstract:Lignin-based hierarchical porous carbon with self-embedded carbon quantum dots for supercapacitor electrodes.

What problem does this paper attempt to address?

Synthesis of Hierarchical Porous Carbon from Metal Carbonates Towards High-Performance Lithium Storage

Chu Liang,Sheng Liang,Yang Xia,Yongping Gan,Libin Fang,Yinzhu Jiang,Xinyong Tao,Hui Huang,Jun Zhang,Wenkui Zhang

DOI: https://doi.org/10.1039/c7gc02841e

IF: 9.8

2018-01-01

Green Chemistry

Abstract:Hierarchical porous carbon (HPC) has become increasingly important in tackling global environmental and energy-related challenges.
All-solid-state Supercapacitors from Natural Lignin-Based Composite Film by Laser Direct Writing

Shutong Wang,Yongchao Yu,Si Luo,Xiaopeng Cheng,Guoying Feng,Yuefei Zhang,Zili Wu,Giuseppe Compagnini,Joshi Pooran,Anming Hu

DOI: https://doi.org/10.1063/1.5118340

IF: 4

2019-01-01

Applied Physics Letters

Abstract:Lignin as a renewable natural resource has been the focus of numerical interest in applications ranging from pitch to porous carbon material. Herein, a facile approach is reported to transform lignin into porous conductive carbon structures and interdigitated circuits for supercapacitor devices using femtosecond laser direct writing. Comparative studies revealed that the laser irradiation induced tetrahedral amorphous carbon while only graphitic carbon was obtained through pyrolysis. Meanwhile, the composite membrane was easily prepared to further optimize the capacities by mixing functional materials (MoS2) into the lignin/polyacrylonitrile (PAN) composite polymers. A MoS2 decorated porous carbon network material could be fabricated through focused femtosecond pulsed laser irradiation of the corresponding composite membranes. The microstructure and spectroscopic features of these laser induced hybrid carbon materials have been deeply investigated. The supercapacitor based on lignin/PAN has high areal specific capacitances of 6.7 mF cm−2 (0.9 F cm−3) at 10 mV s−1. Moreover, doped microsupercapacitors with MoS2 demonstrated enhanced areal capacitances up to 16 mF cm−2 (2.2 F cm−3) and at 10 mV s−1, respectively. The relatively high areal capacitances indicate that the proposed method is potential for innovative manufacturing energy storage devices based on natural lignin.
Facile and Sustainable Synthesis of Sodium Lignosulfonate Derived Hierarchical Porous Carbons for Supercapacitors with High Volumetric Energy Densities

Jie Pang,Wenfeng Zhang,Jinliang Zhang,Gaoping Cao,Minfang Han,Yusheng Yang

DOI: https://doi.org/10.1039/c7gc01434a

IF: 9.8

2017-01-01

Green Chemistry

Abstract:Hierarchical porous carbon for high volumetric energy density supercapacitors is prepared using biomass derivatives through a facile and green process.
Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Min Wang,Hui Wang,Xu Zhang,Dong Chen,Ning Wang,Meng Qin,Jiancheng Yang

DOI: https://doi.org/10.1016/j.apsusc.2023.157820

IF: 6.7

2023-01-01

Applied Surface Science

Abstract:Biomass is treated as the most promising carbon source for supercapacitor electrodes. However, ash in biomass especially Si component is always identified as an adverse substance, which is moved by acid pickling in advance. Factually, SiO2 in biomass can be converted into transition metal silicate (TMS). In this work, NaH2PO2 and Co(NO3)(2) are newly used in sequence to form mesopores and micropores on the rice husks which can be regarded as one carbon-silicon compound material. SiO2 in rice husks is converted to TMSs reacting with Co (NO3)(2), and carbon is catalyzed to graphitize by the Co element. The remaining CoO derived from Co(NO3)(2) forms a heterostructure with Co2SiO4. The pore design criteria for electrode materials with redox reactions are proposed based on COMSOL simulation results, which include mesopores playing a decisive role in ion diffusion, the pore size should be gradually reduced, and the specific capacitance is significantly increased when the porosity is greater than 0.8. The electrode material prepared that Co2SiO4/CoO is anchored on carbon with hierarchical pores has outstanding performance: 246.60 F.g(-1) at 0.5 A.g(-1) for specific capacitance and good cycle capability (88.06% after 10,000 cycles). For the mr10-500-C/CoSi/CoO-900//AC device, it has excellent energy density (37.500 Wh.kg(-1) at 1350 W.kg(-1)).
Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Ling Miao,Dazhang Zhu,Yunhui Zhao,Mingxian Liu,Hui Duan,Wei Xiong,Quanjing Zhu,Liangchun Li,Yaokang Lv,Lihua Gan

DOI: https://doi.org/10.1016/j.micromeso.2017.06.032

IF: 5.876

2017-01-01

Microporous and Mesoporous Materials

Abstract:We design a novel solvent- and self-template strategy to fabricate carbon materials with ultramicro-, supermicro- and mesopores through a simple solvothermal reaction of phloroglucinol and terephthaldehyde in dioxane using acetic acid as the catalyst, followed by carbonization. Dioxane serves simultaneously as a solvent in the reaction system and a template to generate mesopores (3.6 nm). Meanwhile, phloroglucinol/terephthaldehyde polymeric organic frameworks act as a self-template to produce regular and well-developed ultramicropores (0.54 nm) and some supermicropores (0.86 and 13 nm) during carbonization. High specific surface area (1003 m(2) g(-1)) coupled with hierarchical porous structure endow the resultant carbon electrode excellent electrochemical properties including a satisfactory specific capacitance (214 F g(-1) at 1.0 A g(-1)), excellent rate capability (154 F g(-1) at a very high current density of 50 A g-1) as well as superb long-term cycling stability (95.5% retention of initial capacitance after 10000 cycles) in alkaline electrolyte. Compared with traditional synthetic strategy for porous carbons, the present approach can be easily carried out, avoiding tedious procedure, customized hard/soft template or extra activation step, and thus highlights new opportunities towards the simple and highly efficient synthesis of well-designed porous carbons for supercapacitor applications. (C) 2017 Elsevier Inc. All rights reserved.
Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Lijun Su,Shulai Lei,Li Liu,Lingyang Liu,Yuefei Zhang,Siqi Shi,Xingbin Yan

DOI: https://doi.org/10.1039/c8ta02982b

IF: 11.9

2018-01-01

Journal of Materials Chemistry A

Abstract:Quantum dots (QDs)/graphene composites are interesting as promising electrode materials for high-performance supercapacitors because they can well integrate the complementary features of QDs and graphene. Herein, we demonstrate a MnFe2O4 QDs/nitrogen-doped graphene (NG) material prepared by a controllable solvothermal synthesis, in which ultra-small MnFe2O4 QDs are uniformly anchored on NG surfaces. First-principles calculations elucidate that the oxygen-containing groups of graphene oxide play a crucial role in generating such a structure, and a ferrite octahedral skeleton is firstly formed followed by Mn atom insertion. Powdery MnFe2O4 QDs/NG exhibits a high specific capacitance of 517 F g(-2) within a negative potential window (-1 approximate to 0 V) in KOH electrolyte. When the lower cut off voltage is extended to -1.2 V, the specific capacitance can be increased to 905 F g(-1). And the condensed MnFe2O4 QDs@NG electrode (forming a similar structure to pitaya slices) with an astonishing loading mass of 18 mg cm(-2) can achieve high areal and volumetric capacitances (5.3 F cm(-2) and 277.6 F cm(-3)). Moreover, carbon encapsulation is favorable for the improvement of rate and cycling performance, allowing a satisfactory capacitance of 150 F g(-1) even at 200 A g(-1) as well as a superior lifetime up to 65000 cycles. These results make such materials competitive with supercapacitor electrodes and may speed up the development of QD-based electrodes for energy storage applications.
Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Fangbao Fu,Dongjie Yang,Bowei Zhao,Xueqing Qiu

DOI: https://doi.org/10.1021/acs.iecr.3c03851

2024-02-09

Industrial & Engineering Chemistry Research

Abstract:The heteroatom-doped carbons are widely recognized as optimal electrode materials for energy storage yet challenges in their structural regulation. Here, an assembled templating and activation strategy is developed to synthesize N, P-codoped hierarchical porous carbons from lignin (NP-HPLCs) for supercapacitors. The synthesis process involved carbonizing a lignin/F127/Mg2(OH)2CO3 assembly with KOH and (NH4)2HPO4, wherein the generated MgO template and KOH activator facilitated the formation of micromesopores, while (NH4)2HPO4 served as an N/P dopant. The resultant NP-HPLCs exhibited a high accessible surface area of 1302 m2/g and N, P-codoped levels (N: 4.40 atom %, P: 1.47 atom %) with three-dimensional hierarchical porous structures, thereby promoting ion diffusion and transport. Upon these advantages, the carbon electrode achieved a remarkable specific capacitance of up to 358 F/g at 0.5 A/g. Moreover, the fabricated supercapacitor delivered a high energy density of 6.76 Wh/kg at 137 W/kg with excellent cyclic stability. This work offers a valuable reference for the structural design of heteroatom-doped porous carbons for advanced energy storage devices.

engineering, chemical
Boosting the Energy Storage Densities of Supercapacitors by Incorporating N-doped Graphene Quantum Dots into Cubic Porous Carbon

Zhen Li,Fan Bu,Junjie Wei,Weiwei Yao,Liang Wang,Zhiwen Chen,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1039/c8nr06986g

IF: 6.7

2018-01-01

Nanoscale

Abstract:Hierarchical N-doped porous carbon has been prepared by assembling N-doped graphene quantum dots (N-GQDs) onto a carbonized metal-organic framework (cMOF-5) and used as an electrode material for supercapacitors. In this hierarchical composite structure, cMOF-5 provides an effective cubic porous framework with a large specific surface area and good electrical conductivity, while N-GQDs play an important role in enhancing the pseudocapacitive activity and improving the surface wettability of the electrode. Therefore, the N-GQD/cMOF-5 composite electrode material exhibits an outstanding specific capacitance of 780 F g(-1) at 10 mV s(-1) in a three-electrode system. Moreover, the composite electrode assembled in symmetric supercapacitors also displays a high specific capacitance of 294.1 F g(-1) at 0.5 A g(-1), excellent rate capacity and remarkable cycling stability with 94.1% of the initial capacitance retained after 5000 cycles at 5 A g(-1). When used as the positive electrode, the N-GQD/cMOF-5//AC asymmetric supercapacitor exhibits an energy density of 14.4 W h kg(-1) at a power density of 400.6 W kg(-1), while the capacitance retention after 5000 cycles reaches 90.1%. The current N-GQD/cMOF-5 composite electrode paves a feasible avenue to improve the capacitive performances of supercapacitors by constructing heteroatom-doped, hierarchically porous carbon architectures.
Assembling Nitrogen and Oxygen Co-Doped Graphene Quantum Dots Onto Hierarchical Carbon Networks for All-Solid-state Flexible Supercapacitors

Zhen Li,Yanfeng Li,Liang Wang,Ling Cao,Xiang Liu,Zhiwen Chen,Dengyu Pan,Minghong Wu

DOI: https://doi.org/10.1016/j.electacta.2017.03.147

IF: 6.6

2017-01-01

Electrochimica Acta

Abstract:We present a novel approach for hierarchical fabrication of high-performance, all-solid-state, flexible supercapacitors from environmentally friendly all-carbon materials. Three-dimensional carbon nanotube/carbon cloth network (CNT/CC) is used as a conductive, flexible and free-standing scaffold for the electro-deposition of highly N/O co-doped graphene quantum dots to form the high-activity, all-carbon electrodes. The hierarchical structure of the CNT/CC network with high electrical conductivity and high surface area provides improved conductive pathways for the efficient activation of GQDs with high pseudocapacitance and electrical double layer capacitance. The obtained N-O-GQD/CNT/CC electrodes for all-solid-state flexible supercapacitors exhibit an ultrahigh areal capacitance of up to 461 mF cm (2) at a current density of 0.5 mA cm (2), while keeping high rate and cyclic performances. This work highlights the great potential of highly active GQDs in the construction of high-performance flexible energy-storage devices.(C) 2017 Elsevier Ltd. All rights reserved.
Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

Yukang Fan,Fangbao Fu,Dongjie Yang,Weifeng Liu,Xueqing Qiu

DOI: https://doi.org/10.1016/j.jcis.2024.04.099

Abstract:Constructing heteroatom-doped porous carbons with distinct charge storage properties is significant for high-energy-density supercapacitors, yet it remains a formidable challenge. Herein, we employed a thiocyanogen-modulated alkali activation strategy to synthesize N and S co-doped lignin hierarchical porous carbon (NSLHPC). In this process, thiocyanogen serves as a surface modulation mediator to substitute oxygen with nitrogen and sulfur species, while the combination of KOH activation and MgO template generates numerous nanopores within the carbon structure. The three-dimensional interconnected nanosheet architecture facilitates rapid ion transfer and enhances accessibility to active sites. Density functional theory (DFT) calculations demonstrate that introducing N and S heteroatoms through oxygen substitution reduces the adsorption energy barrier of Zn2+. Consequently, the optimized NSLHPC exhibits a remarkable specific capacitance of 438F/g at 0.5 A/g in 6 M KOH, delivering an energy density of 10.4 Wh/kg in the symmetric supercapacitor and an impressive energy density of 104.9 Wh/kg in the zinc-ion hybrid capacitor. The NSLHPC cathode also shows an excellent lifespan with capacitance retention of 99.0 % and Columbic efficiency of 100 % over 10,000 cycles. This study presents innovative strategies for engineering high-performance porous carbon electrode materials by emphasizing pore structure modulation and N, S co-doping as crucial approaches.
Hierarchical porous structure carbon nanosheets derived from sodium lignosulfonate for high-performance supercapacitors

Dichao Wu,Changzhou Chen,Jihui Li,Xiaopeng Jian,Ao Wang,Kang Sun,Jianchun Jiang

DOI: https://doi.org/10.1039/d0nj04907g

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:Because of the special lamellar structure, numerous pores, and large effective specific surface area, the two-dimensional porous carbon material is very beneficial for the storage and transmission of energy.

chemistry, multidisciplinary
Solvent-induced molecular structure engineering of lignin for hierarchically porous carbon: Mechanisms and supercapacitive properties

Huan Wang,Chunlian Liu,Pingxian Feng,Peipei Huang,Ming Huang,Xuliang Lin,Yunhui Feng,Shiyu Gan,Dongxue Han,Wei Wang,Li Niu

DOI: https://doi.org/10.1016/j.indcrop.2022.115831

IF: 6.449

2022-01-01

Industrial Crops and Products

Abstract:Lignin is considered an ideal precursor for porous carbon materials on account of its rich aromatic entities and high carbon content. Modulating the molecular structure of lignin is of paramount importance in controlling the carbon structure. In this work, a solvent-induced self-assembled strategy is reported to synthesize three porous carbon materials using three typical kinds of lignin as precursors. The influence of lignin molecule structure on the microstructural and electrochemical properties of the as-prepared porous carbons is discussed. Experiment results reveal that the hydrophobic nature of lignin in mixed solvent is the force driving the self-assembly process, determining the porosity, dispersity, and conductivity of the resulting carbon. Among the three as-prepared samples, the carbon obtained from sodium lignosulfonate (LSC) shows a highly-dispersed sheet-like structure with rich hierarchical pores. The LSC shows a high specific capacitance of 305 F g− 1, suggesting that it can be utilized as a promising electrode material for high-performance supercapacitors. The proposed solvent-induced self-assembly strategy could guide the rational design of other lignin-derived carbon.
Heteroatom-doped and graphitization-enhanced lignin-derived hierarchically porous carbon via facile assembly of lignin-Fe coordination for high-voltage symmetric supercapacitors

Wei Li,Chongyang Li,Ying Xu,Guanhua Wang,Ting Xu,Wenli Zhang,Chuanling Si

DOI: https://doi.org/10.1016/j.jcis.2023.12.162

Abstract:Lignin-derived carbon materials are widely used as electrode materials for supercapacitors. However, the electrochemical performance of these materials is limited by the surface chemistry and pore structure characteristics. Herein, a novel and sustainable strategy was proposed to prepare heteroatom-doped lignin-derived carbon material (Fe-NLC) with well-developed pore size distributions and enhanced graphitization structure via a facile lignin-Fe coordination method followed by carbonization. During carbonization, Fe3+ in lignin-metal complexes evolve into nanoparticles, which act as templates to introduce porous structures in carbon materials. Also, the lignin-Fe coordination structure endows the material with a higher graphitization during carbonization, thereby improving the structural properties of the carbon materials. Due to the removal of Fe3O4 template, the obtained Fe-NLC possessed reasonable pore distribution and nitrigen/oxygen (N/O) functional groups, which can improve the wettability of materials and introduce pseudocapacitance. Accordingly, Fe-NLC possesses a notable specific capacitance of 264 F/g at 0.5 A/g. Furthermore, a symmetric supercapacitor Fe-NLC//Fe-NLC with a high voltage window (1.8 V) was constructed. The symmetric supercapacitor exhibits a maximum energy density of 15.97 Wh/kg at 450 W/kg, demonstrating well application prospects. This paper proposes a novel approach for preparing carbon materials via lignin-metal coordination to provide an alternative way to explore sustainable and low-cost energy storage materials.
Lignin derived porous carbon with favorable mesoporous contributions for highly efficient ionic liquid-based supercapacitors

Jia Liu,Xiu-Wen Mei,Feng Peng

DOI: https://doi.org/10.1016/j.cclet.2023.108187

IF: 9.1

2023-02-01

Chinese Chemical Letters

Abstract:Lignin and its derivatives hold great potential in developing high performance porous carbon materials for supercapacitors due to the versatile features of high carbon content, abundant multifunctional groups, low cost, and environmental benefits. Unfortunately, their derived porous carbon generally has the features of unfavorable microporous-dominated morphologies and low specific surface area (SSA) attributed from the highly-branched structure of lignin, which are hardly suitable for the supercapacitors with ionic liquid (IL) electrolyte, leading to poor energy density and rate capability. Herein, porous carbon materials with desirable mesoporous contributions from sodium lignosulphonate are designed via a facile template method. Such rich mesoporisity carbon materials not only possess with three-dimensional interconnected network, large SSA, as well as favorable pore size distribution for accelerated ion and electron mass transfer, but also feature low heteroatom content for high electrochemical stability. Consequently, the optimal electrode exhibits a high capacitance of 166 F/g at 0.5 A/g, superior rate performance (59 Wh/kg at 59 kW/kg), as well as impressive cycle life with good capacitance retention of 93.1% in EMIBF4 electrolytes. The present work opens a new avenue to design porous carbon materials with high mesopore properties from lignin for effective compatibility with IL electrolyte in high-performance supercapacitors.

chemistry, multidisciplinary
Lignin Derived Porous Carbons: Synthesis Methods and Supercapacitor Applications

Wenli Zhang,Jian Yin,Caiwei Wang,Lei Zhao,Wenbin Jian,Ke Lu,Haibo Lin,Xueqing Qiu,Husam N. Alshareef

DOI: https://doi.org/10.1002/smtd.202100896

IF: 12.4

2021-10-07

Small Methods

Abstract:Lignin, one of the renewable constituents in natural plant biomasses, holds great potential as a sustainable source of functional carbon materials. Tremendous research efforts have been made on lignin-derived carbon electrodes for rechargeable batteries. However, lignin is considered as one of the most promising carbon precursors for the development of high-performance, low-cost porous carbon electrode materials for supercapacitor applications. Yet, these efforts have not been reviewed in detail in the current literature. This review, therefore, offers a basis for the utilization of lignin as a pivotal precursor for the synthesis of porous carbons for use in supercapacitor electrode applications. Lignin chemistry, the synthesis process of lignin-derived porous carbons, and future directions for developing better porous carbon electrode materials from lignin are systematically reviewed. Technological hurdles and approaches that should be prioritized in future research are presented.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Molten salt-assisted fabrication of hierarchical porous carbon derived from lignite for Zn-ion hybrid supercapacitors

Chunxia Zhao,Zhaogang Yu,Qiushuang Chen,Longsheng Jiang,Yanyuan Qi,Shengfei Hu,Wen Chen

DOI: https://doi.org/10.1016/j.matlet.2024.136180

IF: 3

2024-02-23

Materials Letters

Abstract:Zn-ion hybrid supercapacitors (ZIHCs) are considered as the most potential energy storage device. Herein, a hierarchical porous carbon was prepared by molten salt-assisted one-pot activation strategy. The molten salt synthesized lignite-derived porous carbon (MLPC) has high specific surface area (3035 m 2 g −1 ) and unique architecture with dual majority pores of size in 1–3 nm. The assembled ZIHC delivers a high specific capacitance of 570.6 F g −1 at 0.1 A g −1 and a remarkable energy density of 82.8 W h kg −1 at a power density of 16 kW kg −1 . The cell achieves good long-term cycling stability with 82.2 % capacity retention at 2 A g −1 after 5000 cycles. This study provides a facile approach to utilize lignite to fabricate superior carbon cathode for high-performance aqueous ZIHCs.

materials science, multidisciplinary,physics, applied
Sustainable Lignin-Derived Hierarchical Porous Carbon for Supercapacitors: A Novel Approach for Holding Electrochemical Attraction Natural Texture Property of Precursor

Liangcai Wang,Linen Xie,Xin Feng,Huanhuan Ma,Xiang Li,Jianbin Zhou

DOI: https://doi.org/10.1021/acsomega.1c05617

IF: 4.1

2021-11-22

ACS Omega

Abstract:Finding low-cost and environmentally friendly precursors that can maintain their electrochemical attraction natural texture properties while obtaining hierarchical porous carbons with high electrochemical performance is desirable for offering a leap forward in industrial applications. However, phenomena associated with the high microporosity of porous carbon remain. Herein, the protective effect of hydrothermal methods and the micropore-forming ability of KOH were used. The as-synthesized porous carbon (PC-1) holds the natural texture property (the retention of texture property with apertures higher than 2 nm was up to 80%) and achieves three-dimensional (3D) architecture with hierarchical structures accompanied by an ultrahigh specific surface area (3559.45 m2/g). Benefiting from its texture properties, PC-1 possesses a high specific capacitance of 288.75 F/g at 0.5 A/g, excellent rate capability as high as 223.72 F/g at 10 A/g, and remarkable conductivity in a three-electrode system with a 6 M KOH electrolyte. In view of its environment friendliness, low cost, and excellent specific capacitance, PC-1 has promising applications in high-performance supercapacitors.

chemistry, multidisciplinary
Three-dimensional Nitrogen-Doped Hierarchical Porous Carbon Derived from Cross-Linked Lignin Derivatives for High Performance Supercapacitors

Wu Zhang,Chuying Yu,Libo Chang,Wenbin Zhong,Wantai Yang

DOI: https://doi.org/10.1016/j.electacta.2018.06.100

IF: 6.6

2018-01-01

Electrochimica Acta

Abstract:Nitrogen-doped hierarchical porous carbons are prepared by hydrothermal crosslinking reaction and KOH activation using sodium lignosulfonate as carbon precursor, 1,6-hexanediamine as crosslinking agent and nitrogen source. As-prepared nitrogen-doped hierarchical porous carbon possesses a high specific surface area (1867.4 m(2) g(-1)), moderate nitrogen-doped content (3.6 at.%) and presents a superior three-dimensional hierarchical porous structure with rich micropores, favorable mesopores and interconnected macropores. The nitrogen-doped hierarchical porous carbon electrode performs high specific capacitance (440 F g(-1) at 0.5 A g(-1)) and excellent cycle stability (94.8% of its initial capacitance after 3000 cycles at 20 A g(-1)) in a three-electrode workstation using 6M KOH electrolyte, while it shows a superior rate capability (80.4% from 331 F g(-1) at 1 A g(-1) to 266 F g(-1) at 20 A g(-1)) in 1 MH2SO4. Furthermore, the nitrogen-doped hierarchical porous carbon assembled supercapacitor delivers a high specific capacitance (370 F g(-1) at 0.5 A g(-1)) and remarkable energy density (18.5 Wh kg(-1) at a power density of 300 W kg(-1), 10.4 Wh kg(-1) at high power density of 12 kW kg(-1)) in 6M KOH electrolyte. The as-prepared nitrogen-doped hierarchical porous carbon with outstanding electrochemical performance is promising for applications in sustainable energy-storage devices. (C) 2018 Elsevier Ltd. All rights reserved.
Soluble Salt Assisted Synthesis of Hierarchical Porous Carbon-Encapsulated Fe3C Based on MOFs Gel for All-Solid-state Hybrid Supercapacitor

Yidong Zhang,Rong Shao,Wei Xu,Jianfei Ding,Yuan Wang,Xiuhua Yan,Wenyan Shi,Min Wang

DOI: https://doi.org/10.1016/j.cej.2021.129576

IF: 15.1

2021-01-01

Chemical Engineering Journal

Abstract:Hierarchical porous materials receive extensive attention due to their excellent electrode kinetic performance. Herein, a facile strategy is presented to fabricate hierarchical porous supercapacitor materials using NaCl-assisted MOFs gel as a structure-directing template. By controlling the additive amount of NaCl, hierarchical porous carbon-encapsulated Fe3C with tailored pore size distribution has been obtained with a high specific capacity of 184.1 mAh g- 1 (602.3F g-1) at a current density of 1 A g-1. The analysis of kinetics and impedance indicates that the tailored porosity can provide broad ion diffusion pathway and low charge-transfer resistance. Meanwhile, seawater was used instead of NaCl for preparing hierarchical porous carbon with good capacitive performance. When evaluated their practical applications, the assembled all-solid-state hybrid supercapacitor delivers a high energy density of 30.6 W h kg-1 at a power density of 600 W kg-1, and even maintains an energy density of 15.5 W h kg-1 at a power density of 12000 W kg-1 with 86.5% capacity retention after 10,000 cycles. This work is anticipated to open up a new route of using MOFs gel and water-soluble salts for designing hierarchical porous electrodes materials, which pave the way for advanced utilization of MOFs gel and seawater.
Boosting capacitive performance of N, S co-doped hierarchical porous lignin-derived carbon via self-assembly assisted template-coupled activation

Fangbao Fu,Dongjie Yang,Bowei Zhao,Yukang Fan,Weifeng Liu,Hongming Lou,Xueqing Qiu

DOI: https://doi.org/10.1016/j.jcis.2023.02.084

IF: 9.9

2023-02-24

Journal of Colloid and Interface Science

Abstract:Heteroatom-doped porous carbon materials show promise for use as supercapacitor electrodes, but the tradeoff between surface area and the heteroatom dopant levels limits the supercapacitive performance. Here, we modulated the pore structure and surface dopants of N, S co-doped hierarchical porous lignin-derived carbon (NS-HPLC-K) via self-assembly assisted template-coupled activation. The ingenious assembly of lignin micelles and sulfomethylated melamine into a magnesium carbonate basic template greatly promoted the KOH activation process, which endowed the NS-HPLC-K with uniform distributions of activated N/S dopants and highly accessible nanosized pores. The optimized NS-HPLC-K exhibited a three-dimensional hierarchically porous architecture composed of wrinkled nanosheets and a high specific surface area of 2538.3 ± 9.5 m 2 /g with a rational N content of 3.19 ± 0.01 at.%, which boosted the electrical double-layer capacitance and pseudocapacitance. Consequently, the NS-HPLC-K supercapacitor electrode delivered a superior gravimetric capacitance of 393 F/g at 0.5 A/g. Furthermore, the assembled coin-type supercapacitor showed good energy-power characteristics and cycling stability. This work provides a novel idea for designing eco-friendly porous carbons for use in advanced supercapacitors.

chemistry, physical

Inorganic Salt-Induced Synthesis of Lignin Derived Hierarchical Porous Carbon with Self-Embedded Quantum Dots and Ultrahigh Mesoporosity for Supercapacitors

Synthesis of Hierarchical Porous Carbon from Metal Carbonates Towards High-Performance Lithium Storage

All-solid-state Supercapacitors from Natural Lignin-Based Composite Film by Laser Direct Writing

Facile and Sustainable Synthesis of Sodium Lignosulfonate Derived Hierarchical Porous Carbons for Supercapacitors with High Volumetric Energy Densities

Co2SiO4/CoO Heterostructure Anchored on Graphitized Carbon Derived from Rice Husks with Hierarchical Pore As Electrode Material for Supercapacitor

Design of Carbon Materials with Ultramicro-, Supermicro- and Mesopores Using Solvent- and Self-Template Strategy for Supercapacitors

Sprinkling MnFe2O4 Quantum Dots on Nitrogen-Doped Graphene Sheets: the Formation Mechanism and Application for High-Performance Supercapacitor Electrodes

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

Boosting the Energy Storage Densities of Supercapacitors by Incorporating N-doped Graphene Quantum Dots into Cubic Porous Carbon

Assembling Nitrogen and Oxygen Co-Doped Graphene Quantum Dots Onto Hierarchical Carbon Networks for All-Solid-state Flexible Supercapacitors

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors

Hierarchical porous structure carbon nanosheets derived from sodium lignosulfonate for high-performance supercapacitors

Solvent-induced molecular structure engineering of lignin for hierarchically porous carbon: Mechanisms and supercapacitive properties

Heteroatom-doped and graphitization-enhanced lignin-derived hierarchically porous carbon via facile assembly of lignin-Fe coordination for high-voltage symmetric supercapacitors

Lignin derived porous carbon with favorable mesoporous contributions for highly efficient ionic liquid-based supercapacitors

Lignin Derived Porous Carbons: Synthesis Methods and Supercapacitor Applications

Molten salt-assisted fabrication of hierarchical porous carbon derived from lignite for Zn-ion hybrid supercapacitors

Sustainable Lignin-Derived Hierarchical Porous Carbon for Supercapacitors: A Novel Approach for Holding Electrochemical Attraction Natural Texture Property of Precursor

Three-dimensional Nitrogen-Doped Hierarchical Porous Carbon Derived from Cross-Linked Lignin Derivatives for High Performance Supercapacitors

Soluble Salt Assisted Synthesis of Hierarchical Porous Carbon-Encapsulated Fe3C Based on MOFs Gel for All-Solid-state Hybrid Supercapacitor

Boosting capacitive performance of N, S co-doped hierarchical porous lignin-derived carbon via self-assembly assisted template-coupled activation