Abstract:Abstract Titanium alloys have a high strength-to-weight ratio, fatigue performance and excellent corrosion resistance, and therefore are widely used in the aerospace sector due to their ability to withstand severe mechanical and thermal stresses in service. There are numerous cases where it would be desirable to use different titanium alloys in defined subcomponent regions to improve performance and efficiency. Conventional processing routes do not permit components to be produced with multiple titanium alloys and thus, design efficiency and optimization of component properties is compromised or over-engineered. In this study, a hybrid solid-state consolidation route is presented whereby field assisted sintering technology (FAST) is exploited to diffusion bond (DB) dissimilar titanium alloy powders in defined regions—a process termed FAST-DB. Titanium alloy powders Ti-6Al-4V (Ti-64) and Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) were bonded using FAST in order to study the tensile deformation behavior and strain localization across a dissimilar alloy solid-state bond. FAST-DB was carried out at the sub- and super- beta transus temperatures of both alloys to generate dissimilar microstructure morphologies across the bond. In all cases, diffusion bonds showed excellent structural integrity with no defects and a smooth hardness profile across the bond. The deformation characteristics of the bonds was studied using two different tensile test approaches. The first approach used ASTM standard specimens to measure the mechanical properties of FAST-DB samples and study the location of the tensile failure. The second approach used a microtester and optical Digital Image Correlation to capture the grain interaction in the bond region under tensile loading. The work demonstrated that the diffusion bond remains intact and that tensile failure occurs in Ti-64 (i.e. the lower strength alloy) and is independent of the grain crystal orientation. The results from this study will provide materials engineers confidence in nesting FAST-DB technology in future near net shape manufacturing routes.

The Effect of Grain Size on the Diffusion Bonding Properties of SP700 Alloy

Interface Behaviors and Mechanical Properties of Diffusion Bonded 45 Steel/additive Manufactured 316L Steel Joints

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Effects of grain size and nano-oxide particles on the healing mechanism of hot compression bonding Fe-9Cr-1.5W-0.3Ti alloy

Diffusion Bonding of a Zr-based Metallic Glass in Its Supercooled Liquid Region

Deformation Behaviour of a FAST Diffusion Bond Processed from Dissimilar Titanium Alloy Powders

Effects of Bonding Temperature on Mechanical Properties and Interfacial Morphology of YG8/40Cr Joints Fabricated Using SPS Diffusion Bonding

In-situ Study of the Effect of Grain Boundary Misorientation on Plastic Deformation of Inconel 718 at High Temperature

Imparted benefits on mechanical properties by achieving grain boundary migration across voids

Impacts of layout, surface condition and alloying elements on diffusion welding of micro process devices

Effect of surface roughness on interface characteristics and mechanical properties of dissimilar diffusion bonded 45 steel/additive manufactured 316L steel joints

Microstructural evolution and mechanical response of 304 stainless steel joint diffusion-bonded with micro-deformation

Grain size effect on the assembly quality of micro-scaled barrel formed by microforming

Interfacial voids and microstructure evolution, bonding behavior and deformation mechanism of TC4 diffusion bonded joints

Diffusion bonding of high entropy alloy and stainless steel at a relative lower temperature via surface nano-crystallization treatment

Superplastic Behavior of a Metastable Β-Type Ti Alloy Governed by Grain Size: Microstructure Evolution and Underlying Deformation Mechanism

Microstructural characteristics and mechanical response of diffusion bonding Inconel 617 superalloy

Evolution of Interface Voids and Columnar Grains of the FeCrAl/RAFMs HIP Bonding Joint

Effect of bonding temperature and heat treatment on microstructure and mechanical property of Mg−6Gd−3Y alloy vacuum diffusion bonded joints

Effect of Grain Size on the Plastic Deformation Behaviors of a Fe-18Mn-1.3Al-0.6C Austenitic Steel

Modeling of the Diffusion Bond for SPF/DB Titanium Hollow Structures