Abstract:This study employed an ultrasound-assisted oxidative desulfurization process (UAOD) to investigate the degradation of three sulfurous compounds in the synthetic gas condensate. Various parameters, including oxidizers (hydrogen peroxide, sodium peroxide, potassium superoxide), promoters (formic acid, acetic acid), catalysts (phosphotungstic acid, ferrous(II) sulfate, zirconium dioxide, vanadium pentoxide, aluminum oxide γ, copper(II) oxide), and phase transfer agents (isobutanol, tetraoctylammonium bromide, and tetra-n-butylammonium fluoride), were examined to identify the optimal combination for reducing sulfurous compounds in the UAOD process. The influence of the extraction stage and reactor vessel material on the desulfurization efficiency was also investigated. Results revealed that hydrogen peroxide, formic acid, phosphotungstic acid, and isobutyl alcohol were the most effective oxidizers, promoters, catalysts, and phase transfer agents, respectively. Response surface methodology was used to determine the optimal conditions by evaluating different concentrations of these reagents within specific ranges. The study considered ranges such as 10-70 vol % of hydrogen peroxide, 5-70 vol % of formic acid, 1-30 wt % of phosphotungstic acid, 1-30 vol % of isobutanol, and 5-40 min of ultrasonic ripple time. Empirical models were developed for each sulfurous compound type, providing optimal conditions for sulfur removal with an error margin of less than 0.1%. The validity of the suggested models was confirmed through an industrial data analysis. Additionally, it was observed that increasing the number of extraction stages improved desulfurization efficiency, and using a stainless-steel reactor vessel was more suitable than using a glass vessel.

Gas-liquid Sulfonation in T-shaped Microchannel for DBSA Synthesis and Process Optimization with Response Surface Method

Evaluation of Strongly Acidic Ion-Exchange Catalysts and the Desulfonation Study in the Isobutylene Dimerization Reaction

Efficient Synthesis of Dodecylbenzene Sulfonic Acid in Microreaction Systems

A Study of the Desulfurization Selectivity of a Reductive and Extractive Desulfurization Process with Sodium Borohydride in Polyethylene Glycol

Study on Gas–liquid Sulfonation Reaction under Annular Flow Pattern in Micro-Reactor: Mechanism, Model and Process Optimization

Continuous Sulfonation of Hexadecylbenzene in a Microreactor

The Optimization of Desulfurization Conditions by Response Surface Methodology

Optimization of Micro-Bubble Aeration Process for Magnesium Sulfite Oxidation in Desulphurization Wastewater with Response Surface Methodology

A Simple And Efficient Synthesis Protocol For Sulfonation Of Nitrobenzene Under Solvent-Free Conditions Via A Microreactor

Intensification of Catalytic Oxidation with a T-junction Microchannel Reactor for Deep Desulfurization

Enhancement Of Surfactant On The Dibenzothiophene Biodesulfurization

Kinetics Study of 1-Tetradecene Sulfonation in a Continuous Flow Microreactor

Preparation of Calcium Benzene Sulfonate Detergents by A Microdispersion Process

Statistical Optimization for Biodiesel Production from Soybean Oil in a Microchannel Reactor

OPTIMIZATION OF DIBENZOTHIOPHENE DESULFURIZATION CONDITIONS OF BACTERIUM RHODOPSEUDOMONAS SP. AS-21

Development and application of formulated solvents based on molecular management theory for removing organic sulfur

Multistep cascade continuous flow synthesis of AOS based on microreactor

Study on Reaction Conditions of Toluene Sulfonation with Gaseous Sulfur Trioxide

Modeling and Experimental Investigation of Sulfurous Compounds Removal from Gas Condensate through Ultrasound-Assisted Oxidative Desulfurization Method

Investigating Semibatch Oxidation Reaction of Dimethyl Sulfoxide with Hydrogen Peroxide: Thermal Analysis and Process Optimization

Influence of Gas Flow Rate and Surfactant Concentration on SDBS Foam Properties