Abstract:Using four different soft segments, i. e. polyterahydrofuran diol (PTMG), polycaprolactone diol (PCL), hydroxyl-terminated polybutadiene with high cis-1, 4 content (HTPB), and commercial hydroxyl-terminated polybutadiene produced by free radical polymerization (FHTPB), four kinds of polyurethane elastomers (PUE) were prepared by a two-step solution polymerization. The effects of soft segment structure on mechanical properties and thermal properties at room temperature and low temperature were investigated by tensile test, dynamic mechanical property analysis (DMA), differential scanning calorimetry (DSC) and thermogravimetric analysis. It has been found that the tensile strength and elongation at break of the four PUEs at low temperature (-30℃) are superior to those at room temperature. This is not only related to the autofrettage effect induced by crystallization of soft segment at low temperature, but also to the increase of the degree of micro-phase separation between the soft and hard segments. Compared with the other three kinds of PUE, the soft segment in HTPB-PUE has lowest polarity and glass transition temperature (Tg), so the micro-phase separation is in highest degree, and the elastomer has the most excellent flexibility. Even at -30℃, elongation at break of the HTPB-PUE is up to 660%. PCL-PUE and PTMG-PUE are rigid because their soft segments are easy to crystallize and their degree of micro-phase separation between soft and hard segment is low. The cyclic tensile testing indicated that HTPB-PUE and FHTPB-PUE still have excellent elasticity at-30℃. The results from DSC and DMA showed that the Tg of HTPB-PUE is much lower than the other three PUEs, and the value from DSC is about -103℃. The initial thermal decomposition temperatures of the four PUEs are very similar, and are all around 270℃.

Controlling Energy Dissipation During Deformation by Selection of the Hard-Segment Component for Thermoplastic Polyurethanes

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Effect of soft segment structure on properties of polyurethane elastomers

Temperature-induced Evolution of Micro-structure and Chain Dynamics in Thermoplastic Polyurethane with Low Hard Segment Content as Studied by In Situ Synchrotron SAXS and Time-Domain NMR Experiments

Cyclic Deformation and Fatigue Failure Mechanisms of Thermoplastic Polyurethane in High Cycle Fatigue

Large strain micromechanics of thermoplastic elastomers with random microstructures

Superhigh strength polyurethane materials with oriented microdomains produced through mechanical deformation

Heating‐Responsive Shape‐Memory Effect in Thermoplastic Polyurethanes with Low Melt‐Flow Index

Optimizing TPU performance: The role of mold temperature on injection molding of TPU

Regulating the structure of thermoplastic polyurethane elastomers with a diol chain extender to strength performance

Characterization methods to predict extrusion performance in thermoplastic polyurethane batches

Effects of soft segment molecular weight on the properties of recyclable polyurethanes with low‐temperature multiple shape memory

Strain induced strengthening of soft thermoplastic polyurethanes under cyclic deformation

Effect of Phase Separation and Crystallization on Enthalpy Relaxation in Thermoplastic Polyurethane

Investigating the Effect of Chain Extender on the Phase Separation and Mechanical Properties of Polybutadiene-Based Polyurethane

Negative Enthalpy Variation Drives Rapid Recovery in Thermoplastic Elastomer

The Crystallisation, Microphase Separation and Mechanical Properties of the Mixture of Ether-Based TPU with Different Ester-Based TPUs

Effect of Chain Extender on Hydrogen Bond and Microphase Structure of Biodegradable Thermoplastic Polyurethanes