Abstract:In this paper, we present a highly sensitive inline fiber curvature sensor based on an eccentric core fiber (ECF) and off-axis air cavity Fabry-Pérot interferometer (OACFPI). This ECF-based bending sensor is fabricated by fusion-splicing a section of ECF between a single-mode fiber and an off-axis air cavity fiber. Due to the location of the core in the ECF, a bend applied to the ECF-based OACFPI leads to elongation or shortening of the optical path length in the air cavity, which makes the system suitable for bending measurement. To analyze bending characteristics, three ECFs with different eccentric core locations are investigated separately. In addition, a swept source is employed for measurement. The experimental results demonstrate that, the bending sensitivities of the sensors at the two opposite most-sensitive directions are 0.241 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), 0.131 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and 0.0807 nm/ $\text{m}^{\mathrm {\mathbf {-1 }}}$ (sensor 3), and −0.245 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 1), −0.156 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 2), and −0.077 nm/ $\text{m}^{\mathbf {-1}}$ (sensor 3). The temperature sensitivities of the sensors are 0.84 pm/°C, 0.92 pm/°C, and 0.94 pm/°C, respectively. The proposed sensors are compact and versatile, and are expected to have potential applications in biomedical sensing.

High-sensitivity Two-Axis Vector Bending Sensor Based on Side-Grooved Long Period Grating in Eccentric Core Fiber

A Vector Bending Sensor Based on a Core-Offset Long Period Fiber Grating Induced by an Arc-Discharge

Highly Sensitive Vector Bending Sensor Based on an Embedded Multimode D-shaped LPFG.

Two-Axis Bending Sensor Based on Asymmetric Grid Long-Period Fiber Grating

Integrated All-Fiber Sensor for Simultaneous Measurements of Curvature and Temperature

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Research on vector bending sensors based on taper-drawn seven-core fiber Bragg grating

High Sensitivity Strain Sensor Based on Curved LPG Fabricated in Eccentric Hollow-Core Fiber

In-Fiber Thermally Diffused Coupler and Fiber Bragg Grating Inscribed in Twin-Core Fiber for Sensitivity-Enhanced Vector Bending Sensing

Angularly Cascaded Long-Period Fiber Grating for Curvature and Temperature Detection

Pure Directional Bending Measurement With a Fiber Bragg Grating at the Connection Joint of Eccentric-Core and Single-Mode Fibers

Compact Robust Vector Bending Sensor Based on Single Stress-Applying Fiber

Simultaneous Measurement of Curvature Vector and Temperature Based on Composite Gratings Inscribed on D-Shaped Fiber

A Wide Range Curvature Sensor Based on Fiber Ring Laser With a Long-Period Fiber Grating

High Sensitive Directional Torsion Sensor Based on a Segmented Long-Period Fiber Grating

Curvature and angle sensor based on LP 21 mode reflected by a four-mode fiber Bragg grating

A Simultaneous Measurement Sensor for Temperature and Curvature Based on Congruent Quasi-Helical Long-Period Fiber Grating

Large Range Curvature Measurement Using FBGs in Two-Core Fiber with Protective Coating

Sensitivity-enhanced two-dimensional bending sensor based on single-mode fiber measurement

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

Orientation-discriminating Curvature Sensor Based on a Chirped Fiber Bragg Grating Fabry–Perot Interferometer