Abstract:The focused solar water heating system can automatically adjust its focus according to the solar angle for higher heating rate and source temperature. One of the major challenges for such solar heat collector is stabilizing its daily heat outputs. This study intends to utilize a bulk low melting point alloy (140 degrees C)/expanded graphite (mass ratio of 9:1) composite phase change energy storage material to assure the stability and availability of the hot water output. To investigate the thermal properties of the proposed new material with different apparent densities, this study conducted scanning electron microscopy (SEM), X-ray powder diffractometry (XRD) and differential scanning calorimetry (DSC) tests to examine its thermal conductivity, storage density, and stability. The results of SEM show that the porous structure of expanded graphite (EG) can effectively adsorb the alloy and prevent material leakage. The XRD test shows that the formation of the low melting point alloy and the expanded graphite is a physical process without new substance creation. The DSC test shows the phase change temperature of the composite phase change material (PCM) is about 140 degrees C with an enthalpy of 45.05 kJ kg(-1) (0.46% different from its theoretical value). The thermal conductivity of the bulk alloy/expanded graphite composite PCM with density of 2083 kg m(-3), 2500 kg m(-3), 3125 kg m(-3), 4167 kg m(-3) and 5000 kg m(-3) are 12.65 W m(-1) K-1, 14.64 W m(-1) K-1, 20.80 W m(-1)K(-1), 28.16 W m(-1)K(-1) and 32.64 W m(-1) K-1, respectively, which has an improved thermal conductivity compared to pure alloys (12.44 W m(-1) K-1), especially the bulk composite PCM with a density of 5000 kg m(-3) has the best thermal conductivity and the volumetric energy storage density reaches 2.25 x 10(5) kJ m(-3), higher than the phase change heat storage density of most PCMs for thermal management, such as paraffin (volume heat density is 1.8 x 105 kJ m(-3)), and repeated heating in an environment of high temperature of 180 degrees C does not leak. The results suggested that the developed composite phase change energy storage material with an apparent density of 5000 kg m(-3) has high heat storage capacity, thermal conductivity, energy density and is able to effectively improve the heat exchange rate of the focused solar water heating system.

D‐mannitol‐based Eutectic Composite Phase Change Materials with High Thermal Conductivity and Solar‐thermal Conversion

Preparation and Thermal Energy Storage Properties of D-Mannitol/expanded Graphite Composite Phase Change Material

A novel composite phase change material of high-density polyethylene/d-mannitol/expanded graphite for medium-temperature thermal energy storage: Characterization and thermal properties

Thermal performance of galactitol/mannitol eutectic mixture/expanded graphite composite as phase change material for thermal energy harvesting

Preparation and Thermal Conductivity Enhancement of Binary Non-Eutectic Phase Change Materials Based on Alum-Urea for Solar Heat Storage System

Highly Thermally Conductive Composite Phase-Change Materials Doped with Two-Dimensional Heterogeneous Nanohybrids for Photo/electro-Thermal Energy Storage

A Shape-Stabilized Mgcl2 Center Dot 6h(2)O-Mg(No3)(2)Center Dot 6h(2)O/Expanded Graphite Composite Phase Change Material With High Thermal Conductivity And Stability

A shape-stabilized MgCl2·6H2O–Mg(NO3)2·6H2O/expanded graphite composite phase change material with high thermal conductivity and stability

A shape-stabilized MgCl 2 ·6H 2 O–Mg(NO 3 ) 2 ·6H 2 O/expanded graphite composite phase change material with high thermal conductivity and stability

Preparation and Thermal Properties of Exfoliated Graphite/erythritol/mannitol Eutectic Composite As Form-Stable Phase Change Material for Thermal Energy Storage

Thermal properties of eutectic salts/ceramics/expanded graphite composite phase change materials for high-temperature thermal energy storage

Enhanced Light-Thermal Conversion Efficiency of Mixed Clay Base Phase Change Composites for Thermal Energy Storage

Preparation and Thermal Properties of Propyl Palmitate-Based Phase Change Composites with Enhanced Thermal Conductivity for Thermal Energy Storage

Enhanced Thermal Conductivity of Form-Stable Phase Change Materials Using Carbon Nanofiber-Expanded Graphite Hybrid Structure

The Shape-Stabilized Light-to-thermal Conversion Phase Change Material Based on CH3COONa·3H2O As Thermal Energy Storage Media

MXene-decorated bio-based porous carbon composite phase change material for superior solar-thermal energy storage and thermal management of electronic components

Preparation and application of composite EG/Ba(OH)2·8H2O form‐stable phase change material for solar thermal storage

Carbonized-wood based composite phase change materials loaded with alumina nanoparticles for photo-thermal conversion and energy storage

Experimental Investigations of Alum/expanded Graphite Composite Phase Change Material for Thermal Energy Storage and Its Compatibility with Metals

Preparation and Thermal Properties of a Novel Modified Ammonium Alum/Expanded Graphite Composite Phase Change Material

Preparation and Thermal Properties of Low Melting Point Alloy/expanded Graphite Composite Phase Change Materials Used in Solar Water Storage System