Abstract:Biomass gasification based on calcium looping sorption enhanced reforming (CLSER) has the advantages of generating syngas with high purity hydrogen and simultaneously capturing CO2 in process. This study first aims to develop a novel synthetic CaO-based sorbent, addressing its tar reduction potential and mechanical strength along with cyclic carbonation reactivity. The novel sorbent was synthesized by integrating CaO with iron catalyst and an inert support based on a two-step sol gel method. Comprehensive properties of the novel sorbent including chemical components, effects on biomass pyrolysis and tar reduction, cyclic CO2 capture reactivity, morphology, and mechanical strength were examined by using various methods and facilities. The characterized chemical and physical properties were also compared with pure CaO and two referenced synthetic sorbents. Results showed that a novel sorbent (Ca-Fe-Al) consisting of CaO, iron oxide (Fe2O3), and mayenite (Ca12Al14O33) was successfully synthesized. Evolutions of tar species and CO2 during wheat-straw pyrolysis were found to be lowered in the presence of Ca-Fe-Al as determined by thermogravimetric Fourier transform infrared (TG-FTIR). The enhanced evolutions of light gases such as CO, CH4, and CO2 at temperatures higher than 580 degrees C examined by thermogravimetry-mass spectrometry (TG-MS) indicated the catalysis effects of Ca-Fe-Al on biomass tar cracking and char decomposition. Different from CaO and other synthetic sorbents, Ca-Fe-Al sorbent showed increasing carbonation capacity and reactivity with growing cycle numbers. After being hydrated, the cyclic carbonation performance of Ca-Fe-Al sorbent became superior to other sorbents. Mechanical strength of Ca-Fe-Al sorbent was also greater than that of CaO and was more suitable for long term storage.

Sr2CeO4 As a Robust High Temperature Sorbent for CO2 Capture with Near 100% Sorbent Conversion Efficiency

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Regenerable MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure: Experimental and DFT Study

Properties of a Nano CaO/Al<sub>2</sub>O<sub>3</sub>CO<sub>2</sub>Sorbent

Promotion of MgO Sorbents with Eutectic Carbonate Doping for High-Temperature and Pressure CO2 Capture

Characteristics of MgO-based Sorbents for CO2 Capture at Elevated Temperature and Pressure

Developing a Novel CaO-Based Sorbent for Promoted CO2 Capture and Tar Reduction

Development of Highly Effective CaO@Al2O3 with Hierarchical Architecture CO2 Sorbents Via a Scalable Limited-Space Chemical Vapor Deposition Technique

Synthesis and Performance of a Nano Synthetic Ca-based Sorbent for High Temperature CO_2 Capture

Study on CO2 Sorption Performance and Sorption Kinetics of Ce- and Zr-doped CaO-based Sorbents

A green and scalable synthesis of highly stable Ca-based sorbents for CO2 capture

Cyclic Performance Of Waste-Derived Sio2 Stabilized, Cao-Based Sorbents For Fast Co2 Capture

Hydrophobic interface-assisted casting of Al-supported, CaO-based sorbent pellets for high-temperature CO 2 capture

Synthesis of CaO-based Sorbents Through Incorporation of Alumina/aluminate and Their CO2 Capture Performance

Investigation on a Novel CaO–Y2O3 Sorbent for Efficient CO2 Mitigation

Wet Mixing Combustion Synthesis of CaO-based Sorbents for High Temperature Cyclic CO2 Capture

SGCS-made Ultrafine CaO/Al2O3 Sorbent for Cyclic CO2 Capture

CO2 Capture Performance of CaO-Based Sorbents Prepared by a Sol–Gel Method

Study on Calcium Precursors for CaO Preparation to Capture CO2 at High Temperature

Enhanced high temperature cyclic CO2 capture on Li4SiO4 sorbent from two-dimensional SiO2 nanomeshes

Enhanced cyclic stability of CO 2 adsorption capacity of CaO-based sorbents using La 2 O 3 or Ca 12 Al 14 O 33 as additives