Abstract:The development of fast-charging Li-ion batteries is one of the important steps in building electric vehicles that need high power and fast charging. The reduction in the particle size to the nanometre length scale drastically improves the charging rate by increasing the surface area but lowers the volumetric energy density and can potentially result in more rapid degradation of the electrolyte via electrode-catalysed reactions. Recent reports show that niobium tungsten oxides (NbWOs) with μm sized particles serve as good anode materials for Li-ion batteries having high volumetric capacity with good cyclability at high rates while avoiding solid electrolyte interphase formation (SEI). The high rate performance of NbWOs is attributed to the topochemical charge storage mechanism that exhibits (i) minimal, highly reversible structural changes during the charge-discharge cycles, (ii) high Li-ion diffusion coefficients due to the presence of fast conducting tunnels, and (iii) high electronic conductivity upon lithiation. 1,2 The NbWOs are known to crystallize into two families of different crystal structures depending on the composition and synthesis conditions. The NbWOs phases can either have tungsten bronze-type structures or block-type structures (commonly referred to as Wadsley-Roth phases). Different NbWO phases are reported in the literature 3 which could serve as potential anode materials with better performance. In this work, a series of new NbWO phases have been synthesized at reduced annealing temperatures and the structure of these phases has been established using X-ray and neutron diffraction data. The electrochemical properties of NbWO/Li half cells were examined through a series of galvanostatic (dis)charge tests at varying current rates ranging from 0.2 C to 20 C. The NbWO phases delivers a high reversible capacity of 200 and 130 mAh/g at 0.2C and 10 C respectively vs. Li metal. Here we use operando powder X-ray diffraction to investigate the structural changes occurring at the anode during the charge-discharge process in the newly synthesised NbWO phases. Reference s : 1 K. J. Griffith, K. M. Wiaderek, G. Cibin, L. E. Marbella and C. P. Grey, Nature , 2018, 559 , 556–563. 2 C. P. Koçer, K. J. Griffith, C. P. Grey and A. J. Morris, Chem. Mater. , 2020, 32 , 3980–3989. 3 N. C. Stephenson, Acta Crystallogr. Sect. B Struct. Crystallogr. Cryst. Chem. , 1968, 24 , 637–653. Figure 1

A Wadsley–Roth Crystallographic Shear Phase SrNb6O16 Anode for Fast Li-ion Storage

Ultrafast Carbothermal Shock Synthesis of Wadsley–Roth Phase Niobium‐Based Oxides for Fast‐Charging Lithium‐Ion Batteries

Orthorhombic Nb2O5-x for Durable High-Rate Anode of Li-Ion Batteries.

A V-Doped W 3 Nb 14 O 44 Anode in Wadsley-Roth Structure for Ultra-Fast Lithium-Ion Half/Full Batteries

Wadsley–Roth Crystallographic Shear Structure Niobium‐Based Oxides: Promising Anode Materials for High‐Safety Lithium‐Ion Batteries

Multiscale Designed Niobium Titanium Oxide Anode for Fast Charging Lithium Ion Batteries

Conductive Nb25O62 and Nb12O29 Anode Materials for Use in High-Performance Lithium-Ion Storage

Wadsley–Roth phase CoNb11O29 as a high-performance anode for lithium-ion batteries

Low Temperature Niobium Tungsten Oxides as Anodes for Fast Charging Li-Ion Batteries

Mixed‐Phase Niobium Oxide as a Durable and Ultra‐Fast Charging Anode for High‐Power Lithium‐Ion Batteries

Inhibition of Phase Transition in Amorphous Niobium Oxide by Covalent Carbon Reinforcement Enables Fast‐Charge and Long‐Duration Lithium Storage

A Disordered Crystallographic Shear Block Structure as Fast-Charging Anode Material for Lithium-Ion Batteries

Electrospinning In0.5Nb24.5O62 nanofibers as a novel anode host with superior lithium storage performance

W7Nb4O31 Nanorods with a Mixed Crystal Structure: A Very Fast‐ and Stable‐Charging Anode Material for Aqueous Lithium‐Ion Batteries

Porous ZrNb24O62 nanowires with pseudocapacitive behavior achieve high-performance lithium-ion storage

Carbon coated and oxygen vacancies incorporated Wadsley-Roth phase molybdenum niobium oxide for high-performance lithium-ion storage

W6+-doped Nb2O5 as high-rate anode materials for lithium-ion batteries

Nano‐Sized Niobium Tungsten Oxide Anode for Advanced Fast‐Charge Lithium‐Ion Batteries

Nanoscale Phase Engineering in Two-Dimensional Niobium Pentoxide Anodes toward Excellent Electrochemical Lithium Storage

Recent developments in Nb‐based oxides with crystallographic shear structures as anode materials for high‐rate lithium‐ion energy storage

Accelerated Capacity and Cycling Performance via Facile Instantaneous Precipitation Induced Amorphization for Lithium‐Ion Batteries