Abstract:The development of fast-charging Li-ion batteries is one of the important steps in building electric vehicles that need high power and fast charging. The reduction in the particle size to the nanometre length scale drastically improves the charging rate by increasing the surface area but lowers the volumetric energy density and can potentially result in more rapid degradation of the electrolyte via electrode-catalysed reactions. Recent reports show that niobium tungsten oxides (NbWOs) with μm sized particles serve as good anode materials for Li-ion batteries having high volumetric capacity with good cyclability at high rates while avoiding solid electrolyte interphase formation (SEI). The high rate performance of NbWOs is attributed to the topochemical charge storage mechanism that exhibits (i) minimal, highly reversible structural changes during the charge-discharge cycles, (ii) high Li-ion diffusion coefficients due to the presence of fast conducting tunnels, and (iii) high electronic conductivity upon lithiation. 1,2 The NbWOs are known to crystallize into two families of different crystal structures depending on the composition and synthesis conditions. The NbWOs phases can either have tungsten bronze-type structures or block-type structures (commonly referred to as Wadsley-Roth phases). Different NbWO phases are reported in the literature 3 which could serve as potential anode materials with better performance. In this work, a series of new NbWO phases have been synthesized at reduced annealing temperatures and the structure of these phases has been established using X-ray and neutron diffraction data. The electrochemical properties of NbWO/Li half cells were examined through a series of galvanostatic (dis)charge tests at varying current rates ranging from 0.2 C to 20 C. The NbWO phases delivers a high reversible capacity of 200 and 130 mAh/g at 0.2C and 10 C respectively vs. Li metal. Here we use operando powder X-ray diffraction to investigate the structural changes occurring at the anode during the charge-discharge process in the newly synthesised NbWO phases. Reference s : 1 K. J. Griffith, K. M. Wiaderek, G. Cibin, L. E. Marbella and C. P. Grey, Nature , 2018, 559 , 556–563. 2 C. P. Koçer, K. J. Griffith, C. P. Grey and A. J. Morris, Chem. Mater. , 2020, 32 , 3980–3989. 3 N. C. Stephenson, Acta Crystallogr. Sect. B Struct. Crystallogr. Cryst. Chem. , 1968, 24 , 637–653. Figure 1

A V-Doped W 3 Nb 14 O 44 Anode in Wadsley-Roth Structure for Ultra-Fast Lithium-Ion Half/Full Batteries

W6+-doped Nb2O5 as high-rate anode materials for lithium-ion batteries

Synthesis and performance of micron-sized hexagonal W0.025Nb1.97O5 for high-rate lithium-ion batteries

Nano‐Sized Niobium Tungsten Oxide Anode for Advanced Fast‐Charge Lithium‐Ion Batteries

Ultrafast Carbothermal Shock Synthesis of Wadsley–Roth Phase Niobium‐Based Oxides for Fast‐Charging Lithium‐Ion Batteries

W7Nb4O31 Nanorods with a Mixed Crystal Structure: A Very Fast‐ and Stable‐Charging Anode Material for Aqueous Lithium‐Ion Batteries

W Modification of Nickel-Rich Ternary Cathode Material for Efficient Lithium-Ion Batteries

Triple Conductive Wiring by Electron Doping, Chelation Coating and Electrochemical Conversion in Fluffy Nb2O5 Anodes for Fast‐Charging Li‐Ion Batteries

Al-doped Nb2O5/carbon micro-particles anodes for high rate lithium-ion batteries

Insight into the Fast‐Rechargeability of a Novel Mo1.5W1.5Nb14O44 Anode Material for High‐Performance Lithium‐Ion Batteries

Low Temperature Niobium Tungsten Oxides as Anodes for Fast Charging Li-Ion Batteries

Carbon coated and oxygen vacancies incorporated Wadsley-Roth phase molybdenum niobium oxide for high-performance lithium-ion storage

Wadsley–Roth phase CoNb11O29 as a high-performance anode for lithium-ion batteries

Ultrafine VN quantum nanodots anchored in three-dimensional porous N-doped carbon with excellent pseudocapacitive behaviour for high rate lithium-ion batteries

In situ fabrication of W-doped SnO2 nanoparticles anchored in ultrathin graphite nanosheets as high performance anode material for lithium ion batteries

Regulating the local coordination model of homologous and heterogeneous niobium tungsten oxides toward ultrafast lithium storage

Enabling ultra-fast charging for Ni-rich LiNi0.88Co0.09Mn0.03O2 cathode by bulk W-doping

Amorphous Vanadium Oxide Nanosheets with Alterable Polyhedron Configuration for Fast-Charging Lithium-Ion Batteries.

Inhibition of Phase Transition in Amorphous Niobium Oxide by Covalent Carbon Reinforcement Enables Fast‐Charge and Long‐Duration Lithium Storage

Cr0.5Nb24.5O62 Nanowires with High Electronic Conductivity for High-Rate and Long-Life Lithium-Ion Storage

Wadsley–Roth Crystallographic Shear Structure Niobium‐Based Oxides: Promising Anode Materials for High‐Safety Lithium‐Ion Batteries