Abstract:Prelithiation is a well-established strategy for enhancing battery energy density. However, traditional prelithiation approaches have primarily addressed compensating for the initial active lithium loss (ALL) while overlooking the ALL during extended cycling. In response, a novel method is introduced by increasing the prelithiation degree and pre-storing stable LiCx within the anode. This innovation facilitates sustainable lithium replenishment, resulting in a significant improvement in battery cycle life and energy density. Moreover, challenges associated with using pure Li foils to realize this strategy in contact prelithiation are revealed, such as difficulties in thinning to less than 5 mu m, and the loss of the electronic pathway during prelithiation, resulting in low lithium utilization rates and numerous residues. Additionally, the significantly accelerated capacity fading caused by these residues, typically emerging after hundreds of cycles, has been overlooked. To overcome these challenges, an ultrathin Li-Mg-Al alloy foil is developed with significantly improved mechanical properties and delithiation behavior. During prelithiation, the 96Li2Mg2Al alloy maintains a complete film structure with numerous micropores, avoiding randomly distributed debris. This structure ensures high utilization, unimpeded electronic pathways, and efficient electrolyte filtration. By employing a 5-mu m 96Li2Mg2Al foil for sustainable prelithiation, a substantial improvement in energy density is achieved and tripled the battery's lifespan. A novel life-span prelithiation strategy is proposed and practiced through the replacement of fragile ultrathin lithium metal with self-supporting 96Li2Mg2Al alloys which can spontaneously form a macroscopically complete but microscopically porous membrane after delithiation. This study provides a new perspective on the design of competitive prelithiated batteries and prompts a reevaluation of the potential negative impacts of the current prelithiation method. image

The Raw Mixed Conducting Interphase Affords Effective Prelithiation in Working Batteries.

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

A Bifunctional Composite Artificial Solid Electrolyte Interphase for High Stable Solid-State Lithium Batteries

Unblocked Electron Channels Enable Efficient Contact Prelithiation for Lithium‐Ion Batteries

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Interphase Engineering Enhanced Electro‐chemical Stability of Prelithiated Anode

Understanding of the Mechanism Enables Controllable Chemical Prelithiation of Anode Materials for Lithium-Ion Batteries

Practical Prelithiation of 4.5 V LiCoO2||Graphite Batteries by a Passivated Lithium-Carbon Composite

Artificial Electron Channels Enable Contact Prelithiation of Li‐Ion Battery Anodes with Ultrahigh Li‐Source Utilization

Non-destructive chemical prelithiation of VO 2 (B) anodes constructing a multifunctional interphase layer for advanced Li-Ion batteries

Activated nanolithia as an effective prelithiation additive for lithium-ion batteries

Designing and Demystifying the Lithium Metal Interface toward Highly Reversible Batteries

Practical Prelithiation of 4.5 V LiCoO 2 ||Graphite Batteries by a Passivated Lithium‐Carbon Composite

Sustainable Prelithiation Strategy: Enhancing Energy Density and Lifespan with Ultrathin Li‐Mg‐Al Alloy Foil

A Successive Conversion–Deintercalation Delithiation Mechanism for Practical Composite Lithium Anodes

Artificial Solid Electrolyte Interphase-Protected LixSi Nanoparticles: an Efficient and Stable Prelithiation Reagent for Lithium-Ion Batteries.

Achieving Desirable Initial Coulombic Efficiencies and Full Capacity Utilization of Li‐Ion Batteries by Chemical Prelithiation of Graphite Anode

Tailored interface composition improves the integrity of electrode/electrolyte interphases for high-voltage Ni-rich lithium metal batteries in a sulfolane-based electrolyte

Direct Contact Prelithiation of Multi-Layered Lithium-Ion Battery Pouch Cells Using a Scalable Prelithiation Process

Constructing a Lithiophilic and Mixed Conductive Interphase Layer in Electrolyte with Dual-Anion Solvation Sheath for Stable Lithium Metal Anode

In Situ Derived Mixed Ion/Electron Conducting Layer on Top of a Functional Separator for High‐Performance, Dendrite‐Free Rechargeable Lithium‐Metal Batteries