Composition Design of Excess-Sulfate Phosphogypsum Slag Cement Based on Molecular Dynamics Simulation

XU Fang,LI Heng,SUN Tao,SHUI Zhonghe,DING Chao

DOI: https://doi.org/10.13801/j.cnki.fhclxb.20210816.005

2022-01-01

Abstract:Chemical composition design of raw materials is the basis of hydration reaction and mechanical strength formation of excess-sulfate phosphorgypsum slag cement (PPSC). Laboratory experiments and molecular dynamics simulation (MD) provide a multi-scale regulation and control design basis for chemical composition of PPSC raw materials. The structural model of the PPSC was established by Materials Studio (MS). The effect of the molar ratios of chemical components on the compressive strength of PPSC was studied by means of MD simulation and X-ray diffraction (XRD). The results show that with the increase of the CaO/SO3 molar ratio and the decrease of SiO2/Al2O3, the compressive strength of PPSC shows an increasing trend. When the SiO2/Al2O3 molar ratio is 3.5-3.7 and the CaO/SO3 molar ratio is 1.8~2.0, the compressive strength of PPSC is higher. The MD simulation result of PPSC pore structure is contrary to the compressive strength test result, which proves the reliability of the simulation result. At the atomic scale, MD simulation shows that O, Ca, Al and S atoms exhibit high diffusion ability. In the alkaline environment, sulphate activation increases the bond length of S=O, Al—O and O=O, and the structural is unstable and hydrolyzed, resulting in more ettringite that promotes strength. By adjusting the raw materials SiO2/Al2O3 molar ratio and CaO/SO3 molar ratio, PPSC can form a more stable internal structure. The design of chemical composition molar ratio and MD simulation methods are of great significance for the composition design and application promotion of PPSC.