Abstract:An indium‐doped zinc oxide (IZO) electron transport layer (ETL) is developed for high‐efficiency inverted organic solar cells, and indium doping can improve electron extraction and suppress charge recombination. A 1.2‐micrometer‐thick ultrathin flexible OSC achieves an efficiency of 17.0% with a power‐per‐weight ratio of 40.4 W g−1, which is one of the highest values among ultrathin flexible organic solar cells. Sol–gel processed zinc oxide (ZnO) is one of the most widely used electron transport layers (ETLs) in inverted organic solar cells (OSCs). The high annealing temperature (≈200 °C) required for sintering to ensure a high electron mobility however results in severe damage to flexible substrates. Thus, flexible organic solar cells based on sol–gel processed ZnO exhibit significantly lower efficiency than rigid devices. In this paper, an indium‐doping approach is developed to improve the optoelectronic properties of ZnO layers and reduce the required annealing temperature. Inverted OSCs based on In‐doped ZnO (IZO) exhibit a higher efficiency than those based on ZnO for a range of different active layer systems. For the PM6:L8‐BO system, the efficiency increases from 17.0% for the pristine ZnO‐based device to 17.8% for the IZO‐based device. The IZO‐based device with an active layer of PM6:L8‐BO:BTP‐eC9 exhibits an even higher efficiency of up to 18.1%. In addition, a 1.2‐micrometer‐thick inverted ultrathin flexible organic solar cell is fabricated based on the IZO ETL that achieves an efficiency of 17.0% with a power‐per‐weight ratio of 40.4 W g−1, which is one of the highest efficiency for ultrathin (less than 10 micrometers) flexible organic solar cells.

Ito-Free Organic Solar Cells with Oxide/Metal/Oxide Multilayer Structure Cathode

A Transparent Electrode Based on Solution-Processed ZnO for Organic Optoelectronic Devices

Efficient Inverted Ito-Free Organic Solar Cells Based On Transparent Silver Electrode With Aqueous Solution-Processed Zno Interlayer

Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics

Light manipulating electrode based on high optical haze aluminum-doped zinc oxide for highly efficient indium-tin-oxide free organic solar cells with over 13% efficiency

Ito-Free Semitransparent Organic Solar Cells Based on Silver Thin Film Electrodes

Efficient Indium-Tin-Oxide Free Inverted Organic Solar Cells Based On Aluminum-Doped Zinc Oxide Cathode And Low-Temperature Aqueous Solution Processed Zinc Oxide Electron Extraction Layer

Indium Tin Oxide-Free and Metal-Free Semitransparent Organic Solar Cells

Toward Highly Efficient Large-Area ITO-Free Organic Solar Cells with a Conductance-Gradient Transparent Electrode.

Enhanced Electron Transportation by Dye Doping in Very Low-Temperature (< 130 Degrees C)-Processed Sol-Gel ZnO Toward Flexible Organic Solar Cells

Flexible ITO‐Free Organic Photovoltaics on Ultra‐Thin Flexible Glass Substrates with High Efficiency and Improved Stability

ITO‐Free and Fully Solution‐Processed Semitransparent Organic Solar Cells with High Fill Factors

Solution-Processed ZnO with Conductivity over 1000 S Cm-1 for ITO-Free Organic Photovoltaics.

Ultra‐Thin Flexible ITO‐free Organic Solar Cells with Gradient Bilayer Electron Transport Materials

Spray deposited gallium doped zinc oxide (GZO) thin film as the electron transport layer in inverted organic solar cells

High‐Performance Upscaled Indium Tin Oxide–Free Organic Solar Cells with Visual Esthetics and Flexibility

Efficient Top Illuminated Microcavity Organic Solar Cells Using Air Stable Composite Semitransparent Electrodes

ITO-free Flexible Organic Photovoltaics with Multilayer MoO3/LiF/MoO3/Ag/MoO3as the Transparent Electrode

In‐Doped ZnO Electron Transport Layer for High‐Efficiency Ultrathin Flexible Organic Solar Cells

Preparation of flexible organic solar cells with highly conductive and transparent metal-oxide multilayer electrodes based on silver oxide

Flexible ITO-Free Organic Solar Cells Based on <named-content content-type="math" xlink:type="simple"> <inline-formula> <tex-math notation="TeX">$\hbox{MoO}_{3}/\hbox{Ag}$</tex-math></inline-formula></named-content> Anodes