Abstract:Low-altitude unmanned aerial vehicle (UAV) photogrammetry combined with structure-from-motion (SFM) algorithms is the latest technological approach to imaging 3D stereo constructions. At present, derivative products have been widely used in landslide monitoring, landscape evolution, glacier movement, volume measurement, and landscape change detection. However, there is still a lack of research into the accuracy of 3D data positioning based on the structure-from-motion of unmanned aerial vehicle (UAV-SFM) technology, itself, which can affect the measurable effectiveness of the results in further applications of this technological approach. In this paper, validation work was carried out for the DJI Phantom 4 RTK UAV, for earth observation data related to 3D positioning accuracy. First, a test plot with a relatively stable surface was selected for repeated flight imaging observations. Specifically, three repeated flights were performed on the test plot to obtain three sorties of images; the structure from motion and multi-view stereo (SFM-MVS) key technology was used to process and construct a 3D scene model, and based on this model the digital surface model (DSM) and digital orthophoto map (DOM) data of the same plot with repeated observations were obtained. In order to check the level of 3D measurement accuracy of the UAV technology itself, a window selection-based method was used to sample the point cloud set data from the three-sortie repeat observation 3D model. The DSM and DOM data obtained from three repeated flights over the surface invariant test plots were used to calculate the repeat observation 3D point errors, taking into account the general methodology of redundant observation error analysis for topographic surveys. At the same time, to further analyze the limits of the UAV measurement technique, possible under equivalent observation conditions with the same processing environment, a difference model (DOD) was constructed for the DSM data from three sorties, to deepen the overall characterization of the differences between the DSMs obtained from repeated observations. The results of the experimental study concluded that both the analysis of the 3D point set measurements based on window sampling and the accuracy evaluation using the difference model were generally able to achieve a centimeter level of planimetric accuracy and vertical accuracy. In addition, the accuracy of the surface-stabilized hardened ground was better, overall, than the accuracy of the non-hardened ground. The results of this paper not only probe the measurement limits of this type of UAV, but also provide a quantitative reference for the accurate control and setting of an acquisition scheme of the UAV-based SfM-MVS method for geomorphological data acquisition and 3D reconstruction.

An Innovative Approach of Evaluating the Accuracy of Point Cloud Generated by Photogrammetry-Based 3D Reconstruction

Adaptive Cloud-to-Cloud (AC2C) Comparison Method for Photogrammetric Point Cloud Error Estimation Considering Theoretical Error Space

Accuracy Evaluation of Segmentation for High Resolution Imagery and 3D Laser Point Cloud Data

A Numerical Simulation Procedure for Evaluating the Accuracy of 3-Dimensional Photogrammetric Models and Its Application to Geometric Parameters of Discontinuities in Rock Masses

Accuracy Comparison of Rock Discontinuity Geometric Parameters in Photogrammetry Based on Two Georeferencing Methods: Control Points and Geotagged Photos

3D Reconstruction Approach for Outdoor Scene Based on Multiple Point Cloud Fusion

Outdoor Scene 3D Reconstruction from Multiple Point Cloud

A Fast Flatness Deviation Evaluation Algorithm for Point Cloud Data

A Method for Point Cloud Accuracy Analysis Based on Intensity Information

Experimental Study on 3D Measurement Accuracy Detection of Low Altitude UAV for Repeated Observation of an Invariant Surface

POINT CLOUD REGISTRATION AND ACCURACY FOR 3D MODELLING - A REVIEW

Comparison of the Selected State-Of-The-Art 3D Indoor Scanning and Point Cloud Generation Methods

Leveraging photogrammetric mesh models for aerial-ground feature point matching toward integrated 3D reconstruction

Accuracy assessment of post‐processing kinematic georeferencing based on uncrewed aerial vehicle‐based structures from motion multi‐view stereo photogrammetry

Combining Photogrammetry and Photometric Stereo to Achieve Precise and Complete 3D Reconstruction

A revised orientation-based correction method for SfM-MVS point clouds of outcrops using ground control planes with marks

A robust real-time surface reconstruction method on point clouds captured from a 3D surface photogrammetry system

The comparison of 3D reconstruction by SfM/MVS for various GCPs arrangement

Research on 3D LiDAR Point Cloud Matching Localization Method

ACCURATE REGISTRATION ALGORITHM FOR POINT CLOUD BASED ON PROPERTIES

Improving completeness and accuracy of 3D point clouds by using deep learning for applications of digital twins to civil structures