Abstract:This paper contributes to a new design of the three-dimensional printable robotic ball joints capable of creating the controllable stiffness linkage between two robot links through pneumatic actuation. The variable stiffness ball joint consists of a soft pneumatic elastomer actuator, a support platform, an inner ball and a socket. The ball joint structure, including the inner ball and the socket, is three-dimensionally printed using polyamide−12 (PA12) by selective laser sintering (SLS) technology as an integral mechanism without the requirement of assembly. The SLS technology can make the ball joint have the advantages of low weight, simple structure, easy to miniaturize and good MRI compatibility. The support platform is designed as a friction-based braking component to increase the stiffness of the ball joint while withstanding the external loads. The soft pneumatic elastomer actuator is responsible for providing the pushing force for the support platform, thereby modulating the frictional force between the inner ball, the socket and the support platform. The most remarkable feature of the proposed variable stiffness design is that the ball joint has 'zero' stiffness when no pressurized air is supplied. In the natural state, the inner ball can be freely rotated and twist inside the socket. The proposed ball joint can be quickly stiffened to lock the current position and orientation of the inner ball relative to the socket when the pressurized air is supplied to the soft pneumatic elastomer actuator. The relationship between the stiffness of the ball joint and the input air pressure is investigated in both rotating and twisting directions. The finite element analysis is conducted to optimize the design of the support platform. The stiffness tests are conducted, demonstrating that a significant stiffness enhancement, up to approximately 508.11 N·mm reaction torque in the rotational direction and 571.93 N·mm reaction torque in the twisting direction at the pressure of 400 kPa, can be obtained. Multiple ball joints can be easily assembled to form a variable stiffness structure, in which each ball joint has a relative position and an independent stiffness. Additionally, the degrees of freedom (DOF) of the ball joint can be readily restricted to build the single-DOF or two-DOFs variable stiffness joints for different robotic applications.

3D Printed Monolithic Joints - A Mechanically Bistable Joint

Modular 4D Printing Via Interfacial Welding of Digital Light-Controllable Dynamic Covalent Polymer Networks

Pneumatic Origami Joints A 3D Printed Flexible Joint

Integrated Design and Simulation of Tunable, Multi-State Structures Fabricated Monolithically with Multi-Material 3D Printing

E-Joint: Fabrication of Large-Scale Interactive Objects Assembled by 3D Printed Conductive Parts with Copper Plated Joints

Bistable Joints Enable Morphing of Hydrogel Sheets with Multi‐Stable Configurations

Bistable Joints Enable the Morphing of Hydrogel Sheets with Multistable Configurations

X-Bridges: Designing Tunable Bridges to Enrich 3D Printed Objects' Deformation and Stiffness.

Printable Multi-Stage Variable Stiffness Material Enabled by Low Melting Point Particles Additives

Nature-inspired optimization of tubular joints for metal 3D printing

Design Synthesis of a 4D-Printed Self-Tying Knot with Programmable Morphology

Analysis and Study of Variable Stiffness Joints Based on Bi-Material Nested Elastomers

Multi-Material 3D Printed Bendable Smart Sensing Structures

4D Printed Stiffness‐Tunable Actuator for Load‐Bearing Soft Machines

Enhanced multimaterial 4D printing with active hinges

Three-Dimensional Printable Ball Joints with Variable Stiffness for Robotic Applications Based on Soft Pneumatic Elastomer Actuators

Generative Design and Integrated 3D Printing Manufacture of Cross Joints

Additive Manufacturing for Bioinspired Structures: Experimental Study to Improve the Multimaterial Adhesion Between Soft and Stiff Materials

Bio-Inspired 4D-Printed Mechanisms with Programmable Morphology

3D Printing of a Biocompatible Double Network Elastomer with Digital Control of Mechanical Properties

3D printable strain rate-dependent machine-matter