Abstract:In vivo magnetic resonance image (MRI)-based computational models have been introduced to calculate atherosclerotic plaque stress and strain conditions for possible rupture predictions. However, patient-specific vessel material properties are lacking in those models, which affects the accuracy of their stress/strain predictions. A noninvasive approach of combining in vivo Cine MRI, multicontrast 3D MRI, and computational modeling was introduced to quantify patient-specific carotid artery material properties and the circumferential shrinkage rate between vessel in vivo and zero-pressure geometries. In vivo Cine and 3D multicontrast MRI carotid plaque data were acquired from 12 patients after informed consent. For each patient, one nearly-circular slice and an iterative procedure were used to quantify parameter values in the modified Mooney-Rivlin model for the vessel and the vessel circumferential shrinkage rate. A sample artery slice with and without a lipid core and three material parameter sets representing stiff, median, and soft materials from our patient data were used to demonstrate the effect of material stiffness and circumferential shrinkage process on stress/strain predictions. Parameter values of the Mooney-Rivlin models for the 12 patients were quantified. The effective Young's modulus (YM, unit: kPa) values varied from 137 (soft), 431 (median), to 1435 (stiff), and corresponding circumferential shrinkages were 32%, 12.6%, and 6%, respectively. Using the sample slice without the lipid core, the maximum plaque stress values (unit: kPa) from the soft and median materials were 153.3 and 96.2, which are 67.7% and 5% higher than that (91.4) from the stiff material, while the maximum plaque strain values from the soft and median materials were 0.71 and 0.293, which are about 700% and 230% higher than that (0.089) from the stiff material, respectively. Without circumferential shrinkages, the maximum plaque stress values (unit: kPa) from the soft, median, and stiff models were inflated to 330.7, 159.2, and 103.6, which were 116%, 65%, and 13% higher than those from models with proper shrinkage. The effective Young's modulus from the 12 human carotid arteries studied varied from 137 kPa to 1435 kPa. The vessel circumferential shrinkage to the zero-pressure condition varied from 6% to 32%. The inclusion of proper shrinkage in models based on in vivo geometry is necessary to avoid over-estimating the stresses and strains by up 100%. Material stiffness had a greater impact on strain (up to 700%) than on stress (up to 70%) predictions. Accurate patient-specific material properties and circumferential shrinkage could considerably improve the accuracy of in vivo MRI-based computational stress/strain predictions.

The Viscoelastic Characteristics of In-Vitro Carotid Plaque by Kelvin-Voigt Fractional Derivative Modeling.

Estimating Current and Long-Term Risks of Coronary Artery in Silico by Fractional Flow Reserve, Wall Shear Stress and Low-Density Lipoprotein Filtration Rate

The Relationship Between Shear Wave Velocity and the Ratio of Typeⅰ/typeⅲ Collagen Fiber in the Carotid Plaques

Assessment of Neovascularization Within Carotid Plaques in Patients with Ischemic Stroke

Plaque Elasticity and Intraplaque Neovascularisation on Carotid Artery Ultrasound: A Comparative Histological Study

Stress-Relaxation and Cyclic Behavior of Human Carotid Plaque Tissue

High-resolution magnetic resonance imaging of carotid atherosclerotic plaques - a correlation study with histopathology

Influence of Material Property Variability on the Mechanical Behaviour of Carotid Atherosclerotic Plaques: A 3d Fluid-Structure Interaction Analysis

Studying the Factors of Human Carotid Atherosclerotic Plaque Rupture, by Calculating Stress/Strain in the Plaque, Based on CEUS Images: A Numerical Study

Quantification of Patient-Specific Coronary Material Properties and Their Correlations with Plaque Morphological Characteristics: an in Vivo IVUS Study.

Finite Element Analysis of Mechanics of Neovessels with Intraplaque Hemorrhage in Carotid Atherosclerosis.

The Influence of the Elastic Modulus of the Plaque in Carotid Artery on the Computed Results of FFRCT.

Using in Vivo Cine and 3D Multi-Contrast MRI to Determine Human Atherosclerotic Carotid Artery Material Properties and Circumferential Shrinkage Rate and Their Impact on Stress/strain Predictions.

Quantification of Atherosclerotic Plaque Elasticity Using Ultrasonic Texture Matching

Numerical Study of the Mechanical Interaction Between the Carotid Atherosclerosis Plaque and the Blood Flow Field Distribution: A Geometric Assessment of the Plaque Vulnerability

Plaque Volume Compression Ratio, a Novel Biomechanical Index, is Independently Associated with Ischemic Cerebrovascular Events

Simulating atherosclerotic plaque mechanics using polyvinyl alcohol (PVA) cryogel artery phantoms, ultrasound imaging and inverse finite element analysis

Assessment of Carotid Plaque Vulnerability Using Structural and Geometrical Determinants

Histological validation of three-dimensional variable flip angle turbo spin echo multi-contrast magnetic resonance vessel wall imaging in characterizing carotid vulnerable atherosclerotic plaques

Mechanical properties and composition of carotid and femoral atherosclerotic plaques: A comparative study

Identifying Vulnerable Carotid Plaques in Vivo Using High Resolution Magnetic Resonance Imaging-Based Finite Element Analysis.