Abstract:A significant challenge is posed in improving the thermal performance of heat exchangers by the reduction of the outlet temperature. To confront this intricacy, distinct water‐based nanofluids with two different material conditions are employed by the established framework. Through comprehensive examination, a novel framework has been developed that offers improved thermal performance by reducing the outlet temperature and providing enhanced cooling compared to other working fluids. Valuable insights into optimizing thermal management systems are demonstrated. Researchers and engineers are actively working on enhancing the efficiency of heat exchangers in engineering applications by developing novel designs, exploring new materials, and utilizing nanofluids. Three kinds of nanofluids with varying concentrations are investigated in this paper. The objective is to assess the performance of N‐shaped double‐pipe heat exchanger used in thermoelectric power plants. The performance has been evaluated using COMSOL Multiphysics software. The findings show that higher nanofluid concentrations resulted in elevated heat transfer coefficients and improved efficiency of N‐shape double pipe heat exchanger. The analysis revealed that a mere 1% rise in the volume fraction of nanofluids enhanced the efficiency of the heat exchanger on average 23% when compared to the base fluid (water). In comparison to the N‐shape double pipe (Inconel 625) heat exchangers, the N‐shape double pipe (copper) heat exchangers appear to be more efficient. The introduction of nanoparticles has a notable impact on the heat transfer coefficients. Specifically, within an N‐shaped double pipe (copper) heat exchanger, the inclusion of a 1% volume fraction results in a 2.09% enhancement in the heat transfer coefficient for Al2O3/water, a 1.3% improvement for Fe3O4/water, and a 1.15% increase for TiO2/water. It also exposed that adding 1% Al2O3/water led to a significant 0.623% increase in effectiveness, while TiO2/water showed a 0.259% rise, and Fe3O4/water exhibited a 0.375% improvement. Moreover, increasing the Reynolds number enhances the Nusselt number for Al2O3/water and Fe3O4/water nanofluids by 55.22%, and for TiO2/water by 54.60% at a 6% volume concentration, leading to additional increases in exchanger efficiency. Therefore, the augmentation in nanofluid concentration leads to a reduction in the temperature pinch points both at the intake and outflow. This observation suggests that nanofluids exhibit a superior ability compared to conventional fluids when it comes to effectively lowering temperatures.

Novel 2D Layered MXene Nanofluids for Enhancing the Convective Heat Transfer Performance of Double-Pipe Heat Exchangers

Thermo-hydraulic performance investigation of triple-tube heat exchanger with MXene-based various shape hybrid nanofluids

Experiment on Heat Exchanger Using Innovative Coils and Phase Change Material/MXene Nanofluids

Ultrahigh Heat Transfer Enhancement by Nano- and Micro Porous Layer

107 Collaborative Project of Heat Transfer Enhancement by Nano- and Micro-Scale Porous Layers Formed on Surface

Ultrahigh heat transfer enhancement using nano-porous layer

A TOPSIS-based thermal performance optimization of DHCTHX using MWCNT nanofluids

Enhancing Heat Transfer Performance: Nanofluids Application in Helical Microfin Tube Concentric Heat Exchangers

Ultrahigh Heat Transfer Enhancement by Nano-particle Porous Layer Formed on Surface

Thermal performance investigation of N‐shape double‐pipe heat exchanger using Al2O3, TiO2, and Fe3O4‐based nanofluids

Investigation on the enhancement of heat transfer in counterflow double-pipe heat exchanger using nanofluids

Novel usage of the curved rectangular fin on the heat transfer of a double-pipe heat exchanger with a nanofluid

Ti3C2Tx MXene contained nanofluids with high thermal conductivity, super colloidal stability and low viscosity

Efficient convective heat transfer enhancement in heat exchanger tubes with water based novel hybrid nanofluids: experimental investigation

Heat transfer enhancement in a double-pipe helical heat exchanger using spring wire insert and nanofluid

Experimental investigations on heat transfer enhancement in a double pipe heat exchanger using hybrid nanofluids

Augmentation of heat transfer in a DPHE with bowl cut twisted tape inserts and TiO2/CuO hybrid nanofluids

Analyzing Heat Transfer: Experimental and Theoretical Studies on Metal Oxide-Based Binary Nanofluid in Mini Hexagonal Tube Heat Sink

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes

Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids

Thermo-optical characterization of novel MXene/Carbon-dot hybrid nanofluid for heat transfer applications