Abstract:The recovery of valuable metals from spent lithium-ion batteries (LIBs) is crucial for environmental protection and resource optimization. In the traditional recovery process of spent LIBs, the leaching of high-valence metals has the problems of high cost and limited reagent utilization, and some valuable metals are lost in the subsequent purification process of the leaching solution. To reduce the cost of reagents, this study proposes the use of low-cost SO 2 as a reagent combined with pressure leaching to efficiently recover high-valence metals from delithiated materials of spent LIBs, while selective solvent extraction is used to remove trace impurities in the leaching solution to avoid the loss of valuable metals. Experimental results demonstrated that by optimizing the conditions to 0.25 MPa SO 2 partial pressure and 60 min reaction time at 70 °C, the leaching efficiencies for Ni, Co, and Mn reached 99.6%, 99.3%, and 99.6%, respectively. The kinetic study indicated that the leaching process was diffusion-controlled. Furthermore, the delithiated materials were used to completely utilize the residual SO 2 in the solution to obtain a high concentration Ni–Co–Mn rich solution. Subsequently, Fe and Al impurities were deeply removed through a synergistic extraction of Di-2-ethylhexyl phosphoric acid (D2EHPA) and tributyl phosphate (TBP) without loss of valuable metals, achieving a high-purity Ni–Co–Mn solution. The process developed based on this work has the characteristics of environmental friendliness, high valuable metal recovery, and high product purity, providing a reference technical method for the synergistic treatment of waste SO 2 flue gas with spent LIBs and the deep purification of impurities in spent LIBs.

Boosting the VOCs purification over high-performance α-MnO2 separated from spent lithium-ion battery: Synergistic effect of metal doping and acid treatment

Catalytic performance improvement of VOCs oxidation over MnOx and GdMnO3 composite oxides from spent lithium-ion batteries: Effect of acid treatment

Resource Utilization of Spent Ternary Lithium-Ions Batteries: Synthesis of Highly Active Manganese-Based Perovskite Catalyst for Toluene Oxidation

Synthesis of MnO2 derived from spent lithium-ion batteries via advanced oxidation and its application in VOCs oxidation

Selective Recovery of Manganese from Spent Ternary Lithium-ion Batteries for Efficient Catalytic Oxidation of VOCs: Unveiling the Mechanism of Activity Enhancement in Recycled Catalysts

Performance of toluene oxidation on different morphologies of α-MnO2 prepared using manganese-based compound high-selectively recovered from spent lithium-ion batteries

Manganese-based multi-oxide derived from spent ternary lithium-ions batteries as high-efficient catalyst for VOCs oxidation

Recycling of waste power lithium-ion batteries to prepare nickel/cobalt/manganese-containing catalysts with inter-valence cobalt/manganese synergistic effect for peroxymonosulfate activation

High-selective separation recovery of Ni, Co, and Mn from the spent LIBs via acid dissolution and multistage oxidation precipitation

Recovery of Li, Ni, Co and Mn from spent lithium-ion batteries assisted by organic acids: Process optimization and leaching mechanism

Selective Extraction of Transition Metals from Spent LiNix Coy Mn1-x-y O2 Cathode via Regulation of Coordination Environment

Preferentially selective recovery of lithium from spent LiCoO2 by sulfation roasting of MnSO4

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Upcycling Spent Cathode Materials to Bifunctional Catalysts for High‐Stability Lithium–Sulfur Batteries

Recycling and reutilization of LiNi0.6Co0.2Mn0.2O2 cathode materials from spent lithium-ion battery

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Selective recycling of lithium from spent LiNixCoyMn1-x-yO2 cathode via constructing a synergistic leaching environment

Recycling of Li-Ion Batteries from Industrial Processing: Upscaled Hydrometallurgical Treatment and Recovery of High Purity Manganese by Solvent Extraction

High-efficiency recovery of valuable metals from spent lithium-ion batteries: Optimization of SO 2 pressure leaching and selective extraction of trace impurities

One-step nickel-cobalt alloy electrodeposition from spent lithium-ion battery via synergistic pH adjustment and Mn2+ supplementation

Enhancing the Electrochemical Performance of Li2-xMnO3 via Dual Strategies: Using MOF-Derived Manganese Oxide Precursor and Tuning Li Content