Abstract:Energy absorption of traditional tubular energy absorbers is restricted by the low structure efficiency, which makes the mean crushing force of the structure usually much lower than its yield strength. The combination of a multicellular design and a gradient-thickness strategy significantly improves the energy-absorption ability of thin-walled energy absorbers while reducing weight. Gradient-thickness multicellular tubes (GTMT) were studied in this paper to demonstrate this advantage. Mechanical performances of GTMT with two material-distribution principles, sample gradient thickness (SGT) and modified gradient thickness (MGT), were investi-gated experimentally and numerically, primarily in terms of folding behaviors, energy-absorption ability, and load-carrying capacity undulation. Wire-cut electrical discharge machining technology was used to create a series of aluminum alloy specimens that were then compressed under quasistatic loading conditions. Following that, finite element method was used to run detailed numerical simulations. The effect of geometric configuration was determined after conducting parametric studies with different cell density and thickness gradient coefficients. The results showed that, compared to a traditional multicellular tube, a gradient-thickness one with MGT material distribution can improve structural efficiency with a stable loading history. Increases in cell density and thickness gradient coefficient have positive effects on energy-absorption ability; however, excessively high parameter values will lead to global bending deformation and weaken the mean crushing force. Therefore, reasonable parameter matching is vital. The result shows that when the cell density reached 9 x 9 and the thickness gradient coefficient reached 1.4, the mean crushing force was 98.16% of the full-plastic strength of the matrix, and there was no irregular deformation, indicating that ideal energy absorption is almost achieved. These achievements pave a way for achieving ideal energy absorption.

Approaching Ideal Energy Absorption Through the Multicellular Structure with Gradient Material Distribution

Efficient energy absorption of bio-inspired bi-directional gradient hierarchical multi-cell structure

Energy Absorption Comparison of Conventional and Dual Gradient Hierarchical Multicellular Tubes under Axial Impact

Energy Absorption Characteristic of Biomimetic Gradient Hierarchical Multicellular Tubes Under Axial Impact

Approaching perfect energy absorption through structural hierarchy

Energy Absorption Characteristics and Crashworthiness of Rhombic Hierarchical Gradient Multicellular Hexagonal Tubes

A More Weight-Efficient Hierarchical Hexagonal Multi-Cell Tubular Absorber

Bio-inspired multi-cell tubular structures approaching ideal energy absorption performance

Dynamic Crashing Behavior of New Extrudable Multi-Cell Tubes with a Functionally Graded Thickness

Axial crushing and optimal design of square tubes with graded thickness

Dynamic Axial Crush Analysis and Design Optimization of a Square Multi-Cell Thin-Walled Tube with Lateral Variable Thickness

On Multi-Stage Deformation and Gradual Energy Absorption of 3D Printed Multi-Cell Tubes with Varying Cross-Section

Crushing analysis of square gradient hierarchical multicellular tubes

Energy Absorption of Thin-Walled Circular Tubes with Gradient Thickness under Oblique Loads

Quasi-static Energy Absorption of Hollow Microlattice Structures

On the crashworthiness of novel right-angle fractal gradient hierarchical multi-cell bi-tubular tubes under axial loading

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing

An investigation on the energy absorption characteristics of a multi-cell hexagonal tube under axial crushing loads

Energy Absorption of Corrugated Multi-Cell Tubes under Axial Compression

Comparison of Mechanical Properties and Energy Absorption of Sheet-Based and Strut-Based Gyroid Cellular Structures with Graded Densities

Modular assembly for multicell structures with designable energy absorption characteristics