Abstract:Energy absorption of traditional tubular energy absorbers is restricted by the low structure efficiency, which makes the mean crushing force of the structure usually much lower than its yield strength. The combination of a multicellular design and a gradient-thickness strategy significantly improves the energy-absorption ability of thin-walled energy absorbers while reducing weight. Gradient-thickness multicellular tubes (GTMT) were studied in this paper to demonstrate this advantage. Mechanical performances of GTMT with two material-distribution principles, sample gradient thickness (SGT) and modified gradient thickness (MGT), were investi-gated experimentally and numerically, primarily in terms of folding behaviors, energy-absorption ability, and load-carrying capacity undulation. Wire-cut electrical discharge machining technology was used to create a series of aluminum alloy specimens that were then compressed under quasistatic loading conditions. Following that, finite element method was used to run detailed numerical simulations. The effect of geometric configuration was determined after conducting parametric studies with different cell density and thickness gradient coefficients. The results showed that, compared to a traditional multicellular tube, a gradient-thickness one with MGT material distribution can improve structural efficiency with a stable loading history. Increases in cell density and thickness gradient coefficient have positive effects on energy-absorption ability; however, excessively high parameter values will lead to global bending deformation and weaken the mean crushing force. Therefore, reasonable parameter matching is vital. The result shows that when the cell density reached 9 x 9 and the thickness gradient coefficient reached 1.4, the mean crushing force was 98.16% of the full-plastic strength of the matrix, and there was no irregular deformation, indicating that ideal energy absorption is almost achieved. These achievements pave a way for achieving ideal energy absorption.

Approaching perfect energy absorption through structural hierarchy

Investigation of Lateral Crushing Behaviors of Hierarchical Quadrangular Thin-Walled Tubular Structures

Crushing mechanism of hierarchical lattice structure

In-plane Compression Behavior and Energy Absorption of Hierarchical Triangular Lattice Structures

A More Weight-Efficient Hierarchical Hexagonal Multi-Cell Tubular Absorber

Hierarchical Design, Manufacture and Crushing Behaviors of CFRP Tubular Energy Absorbers

Energy Absorbing Ability of Rectangular Self-Similar Multi-Cell Sandwich-Walled Tubular Structures

Bio-inspired multi-cell tubular structures approaching ideal energy absorption performance

Design of hierarchical multi-cell double circular tubes thin-walled structures for energy absorption

Combination of Taper and Hierarchy to Improve Crushing Efficiency of Thin-Walled Tubes

Impact energy absorption of bio-inspired tubular sections with structural hierarchy

Quasi-static Energy Absorption of Hollow Microlattice Structures

Approaching Ideal Energy Absorption Through the Multicellular Structure with Gradient Material Distribution

Energy Absorption Mechanisms of Hierarchical Woven Lattice Composites

Axial crushing and energy absorption of graded hierarchical hexagonal tubes

Energy Absorption of Self-Similar Inspired Multi-Cell Tubes under Quasi-Static and Dynamic Loading

Crushing Analysis for Novel Bio-Inspired Hierarchical Circular Structures Subjected to Axial Load

Energy Absorption Characteristics and Crashworthiness of Rhombic Hierarchical Gradient Multicellular Hexagonal Tubes

Energy Absorption Characteristic of Biomimetic Gradient Hierarchical Multicellular Tubes Under Axial Impact

Crushing Behaviors of Novel Multi-Cell Square Tubes and Its Hierarchical Multi-Cell Structures under Axial Loading

Energy absorption of thin-walled tubes enhanced by lattice structures