Effect of High-Temperature Oxidation on the Subsurface Microstructure and Magnetic Property of Medium Manganese Austenitic Steel

Yu Guo,Jianhua Zhao,Bei Xu,Cheng Gu,Kaiqing Feng,Yajun Wang
DOI: https://doi.org/10.1016/j.jallcom.2022.165254
IF: 6.2
2022-01-01
Journal of Alloys and Compounds
Abstract:The oxidation behavior of Fe-Mn-Cr-Al-Si medium manganese austenitic steel and the effect of high temperature oxidation on the subsurface microstructure and magnetic properties were studied. When the oxidation temperature is relatively low (800 ? and 900 ?), the oxide layer is mainly composed of Mn oxides, Fe oxides, and Mn-Cr spinel. On the other hand, at the oxidation temperature of 1000 ?, the outer oxide layer consists of Fe2O3, Mn2O3, Fe3O4, and Mn3O4, while the inner oxide layer is composed of Mn-Cr, Fe-Cr, Mn-Al, and Fe-Si spinel. A thin ferrite layer (less than 6 mu m) is formed in the subsurface of the samples oxidized at 800 ? and 900 ?. However, in the subsurface of the sample oxidized at 1000 ?, a thicker martensite layer (over 100 mu m) is also observed besides the ferrite layer with thickness of about 10 mu m. VSM results show that the samples oxidized at 800 ? and 900 ? exhibit paramagnetic behavior attribute to the relatively thin oxide and ferrite layer. However, the sample oxidized at 1000 ? exhibits soft magnetic property due to the much thicker oxide and BCC layer. (C) 2022 Elsevier B.V. All rights reserved.
What problem does this paper attempt to address?