Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

Research on nonlinear fitting analysis and fitting point identification method of bolted connections

Modeling of Steel Bolted T-Stub Connection under Large Deformation Condition

Numerical modelling of lockbolted lap connections for aluminium alloy plates

FINITE ELEMENT ANALYSIS OF STIFFENED T-STUB CONNECTIONS

Analysis of the nonlinear characteristics of the bonding surfaces of the bolted structure

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Finite Element Modeling of Early Stage Self-loosening of Bolted Joints

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Vision-based Detection of Bolt Tension Considering Non-Rotatory Loosening Via a New Calculation Method of Bolt Flexibility Coefficient

Tightening performance analysis of bolted connection considering non-parallel contact

Modeling and nonlinear dynamic analysis of bolt joints considering fractal surfaces

Component-based model of semi-rigid connections for nonlinear analysis of composite structures

Experimental Analysis of the Nonlinear Normal Static Stiffness of Bolted Joints

Quantitative Analysis of Bolt Loosening Angle Based on Deep Learning

A Four-Parameter Model for Nonlinear Stiffness of a Bolted Joint with Non-Gaussian Surfaces

Establishment and Verification of Nonlinear Bolt Head Connection Stiffness Theoretical Model Based on Levenberg-Marquardt Method

Nonlinear Analysis of the Threaded Connection with Three-Dimensional Finite Element Model

Study on hysteresis and threaded fitting behavior of bolted joint with non-parallel bearing surface

Bolted Connections Layout Design for Machine Tool Support Part

Structural mechanics analysis of bolt joint of rigid flexible coupling manipulator

Finite element analysis of bolted joints under torsional loads