Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

(Invited) Engineering Surface Structures and Energetics of α-Fe2O3 and p-Si for Efficient Solar Water Splitting

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Surface Engineering of Nanoporous Silicon Photocathodes for Enhanced Photoelectrochemical Hydrogen Production

Material Design and Surface/Interface Engineering of Photoelectrodes for Solar Water Splitting

Enhancement of Solar-to-hydrogen Conversion Efficiency in Water Splitting by Optimizing Morphology of Cu2O Nanostructure and Surface Modification

Surface/Interface Engineering of Si-Based Photocathodes for Efficient Hydrogen Evolution

Achieving 12.0% Solar-to-Hydrogen Efficiency with a Trimetallic-Layer-Protected and Catalyzed Silicon Photoanode Coupled with an Inexpensive Silicon Solar Cell

(Invited) Nanostructured Photoelectrochemical Electrodes and Electrocatalysts for Efficient Solar Energy Conversion

Enabling Unassisted Solar Water Splitting by Iron Oxide and Silicon

(Invited) Functional Nanostructures for Highly Efficient Photoelectrochemical Water Splitting

Manipulating metal-oxygen local atomic structures in single-junctional p-Si/WO3 photocathodes for efficient solar hydrogen generation

Dissolution-Induced Surface Reconstruction of Ni0.95Pt0.05Si/p-Si Photocathode for Efficient Photoelectrochemical H2 Production

Integration of a Cu2O/ZnO heterojunction and Ag@SiO2 into a photoanode for enhanced solar water oxidation

WO3@α‐Fe2O3 Heterojunction Arrays with Improved Photoelectrochemical Behavior for Neutral Ph Water Splitting

Industrial-Si-based photoanode for highly efficient and stable water splitting

Single-Crystal Integrated Photoanodes Based on 4 H-SiC Nanohole Arrays for Boosting Photoelectrochemical Water Splitting Activity

Highly efficient photocatalytic water splitting in direct Z-scheme α -In2Se3/Are van der Waals heterostructures

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

An Interface‐cascading Silicon Photoanode with Strengthened Built‐in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting

Engineering Single-Atomic Ni-N4-O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Interfacial engineering of 1D/2D heterostructured photoanode for efficient photoelectrochemical water splitting