Abstract:The purpose of the secondary optical design for light emitting diodes (LED) illumination is to rearrange the direct output of LED and then achieve the desired illumination. Usually a lens is applied to realize this function in an LED illumination system, and a freeform lens can do better than the traditional spherical ones. The method in this paper can be used to design a freeform lens in short time, just less than 10 seconds. And this freeform lens is constructed using the numerical solutions of a set of first-order partial differential equations, which are deduced from the Snell's law according to the conservation of energy. Using an LED as the source while immersing it in the lens, a uniform rectangle can be gotten through single refraction, and with uniformity near to 90%. The rectangular illumination also has a relatively clear cut-off line with little blur at the edge. This method can shorten the designing time and improve the performance of LED illumination system. Furthermore, not only rectangle, but other illumination figures can be achieved by freeform lens designed by this method, which can broaden the scope of freeform lens's usage.

Design of a freeform refractive surface with reflection loss for illumination

Freeform Surface Lens Design for Uniform Illumination

Design Of Freeform Lenses For Illuminating Hard-To-Reach Areas Through A Light-Guiding System

Formulating the Design of Two Freeform Lens Surfaces for Point-Like Light Sources.

Design of Freeform Illumination Optics

Freeform Surface Lens for LED Uniform Illumination.

Efficient Optimal Design of Smooth Optical Freeform Surfaces Using Ray Targeting

Freeform Led Lens For Uniform Illumination

Freeform Lens Design for LED Illmination

Designing Two Freeform Surfaces with Monge–Ampère Equation Method for Point-Like Sources

Ray Targeting for Optimizing Smooth Freeform Surfaces for Led Non-Rotational Illumination

Optimized Design of LED Freeform Lens for Uniform Circular Illumination

Design of Off-Axis Reflective Projection Lens Using Spherical Fresnel Surface

Feedback Modification Strategy for Designing a Free-Form Optical Surface with Given Illumination Pattern

Secondary Optical Design for LED Illumination Using Freeform Lens

Precise light control in highly tilted geometry by freeform illumination optics

Application of a Modified LED Lens Model on a Double Free-form Surface

Design of reflective lens with Zernike polynomial free form surfaces

The design of the freeform reflector for uniform illumination

A mathematical model of the single freeform surface design for collimated beam shaping.

53.2: An Optimization Design Method of LED Freeform Lens for Uniform Circular Illumination